Hurco VMX 30 Vertical Machining Centre with Ultimax Control, 24 ATC, Table Size 1000mm x 500mm, CAT40 Tooling with 10-Tool Holders. S/No. H-30353 (2003)

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Qty of CAT40 Tool Holders and Collets and Bench

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Combination of Lots 100 & 100A

Hurco VMX 30 Vertical Machining Centre with Ultimax Control, 24 ATC, Table Size 1000mm x 500mm, CAT40 Tooling with 10-Tool Holders. S/No. H-30353 (2003)

and

Qty of CAT40 Tool Holders, Collets and Bench

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Hurco VSX24 Vertical Machining Centre with Hurco Ultimax 55M Control, 24-ATC, Table Size 760mm x 500mm with 10-Tool Holders. S/No. H-20532 (2002)

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Qty of CAT40 Tool Holders and Collets

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Combination of Lots 101 & 101A

Hurco VSX24 Vertical Machining Centre with Hurco Ultimax 55M Control, 24-ATC, Table Size 760mm x 500mm with 10-Tool Holders. S/No. H-20532 (2002)

and

Qty of CAT40 Tool Holders and Collets

Please Note: These lots are located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Sodick AQ325L Wire Eroder with Sodick Control, Work Area 600mm x 450mm. S/No. 1625

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Sodick AQ325L Wire Eroder with Sodick Control, Work Area 600mm x 450mm. S/No. 0167

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Sodick AQ325L Wire Eroder with Sodick Control, Work Area 600mm x 450mm. S/No. 0168

Please Note: For Spares and Repairs

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Sodick AM3L Die Sink with Sodick LN1 Control, 4 Automatic Tool Changer, 3R Tooling, Table Size 600mm x 400mm. S/No. 0070 (2002)

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Agie Mondo Star 20 Die Sinking Machine with Agie Futura V Control, 3R Tooling, 300mm x 400mm Table Size, 350mm x 150mm Magnetic Chuck. S/No. M20 STAR – 003391

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Agie Mondo Star 20 Die Sinking Machine with Agie Futura V Control, 3R Tooling, 300mm x 400mm Table Size, 350mm x 150mm Magnetic Chuck. S/No. M20 STAR – 003390

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Sodick AP3 Model FS-SAP3 Spark Eroder with Fine Sodick Mark X EDM Control, Table Size: 600mm x 300mm, Tank Size: 700mm x 500mm x 320mm depth, Homemade Plate: 400mm x 250mm, 3R System. S/No. SAP3 207 (1991)

Please Note: This Machine is not in working order, sold as is for spares and repairs

Please Note: This lot is located in Birmingham. A dismantling and loading onto suitable vehicle charge of £250 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Sodick KLC Small Hole Drilling EDM with Table Size 350mm x 250mm, X ACT SD52 DRO. Plant No. 0142

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

XYZ 1500 Turret Mill with Newall DRO 42’’ x 9’’ Table, 6’’ Machine Vice, Power Cross Feed. S/No. 9919. (2003)

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Jones & Shipman 1400 Surface Grinder with Opti Dress and Extraction Mag Chuck 2ft x 8’’. S/No. BO 17369

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Kitchen & Walker 4ft Radial Drill with Swinging Box Table 2ft x 20’’ x 22’’. S/No. TAB1200/602

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Alexander 2CG Tool Cutter Grinder with Collets. S/No. 2938N

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Model UE-250A Horizontal Band Saw 10’’ with Blade 27mm x 0.9mm x 3300mm. S/No. 03053903 (2003)

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

3 Ton A-Frame Mobile Crane with Electric Hoist, 2.9m x 1.5m x 3.7m. Plant No. 0306

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Medding Model DTB Bench Drill. S/No. 533789 with Bench.

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Coolie Tool Lift, SWL 500KG. S/No. 503515407

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Tamsan Compressor TVK 1100TK, 8 Bar. S/No. 7022 (2015)

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Large Qty of BT40 Tool Holders and Collets

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Large Qty of Collets

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Qty of 30 ISO Tooling

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Large Qty 3R Tooling with 3-drawer Work Bench. 1.5m x 0.75m

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

3R Tooling

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

3R Tooling

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

3R Tooling

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

3R Tooling

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

3R Tooling

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

3R Tooling

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

3R Tooling

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Qty of Micrometers

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Qty of Slip Gauges

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Qty Height Gauges and Cylinder Gauges

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Qty of Micrometers

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Granite Surface Block 440mm x 300mm

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Granite Surface Block 460mm x 300mm

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Granite Surface Block 460mm x 300mm

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Granite Surface Block 460mm x 300mm

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Granite Surface Block 440mm x 300mm

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Granite Surface Block 450mm x 300mm

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Steel Table. 18’’ x 12’’

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Swivel Tables 12’’ x 6’’ and 10’’ x 6 ½ ‘’

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Magnetic Sine Table (Eclipse) 10’’ x 5’’

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Magnetic Sine Table (Ratcliffe) 10’’ x 5’’. S/No. SEM105

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Magnetic Chuck 12’’ x 6’’

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Magnetic Chuck 10’’ x 5’’

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Magnetic Blocks

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Grinding Attachments

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Qty of Machine Clamps

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Large Qty of Machine Clamps

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Qty of Angle Plates

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

10" Rotary Machine Vice

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

8’’ Machine Vice

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

6’’ Machine Vice

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

6’’ Machine Vice

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

6’’ Machine Vice

Please Note: This lot is located in Cannock. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.