2773 - Engineering & Fabrication Equipment available on behalf of a Retained Client
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location: These lots are located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange an appointment.
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 21-30 von 81
Los 21: Pollard Model 150A/6 Six Spindle In Line Drilling Machine
Pollard Model 150A/6 Six Spindle In Line Drilling Machine, All Spindles 3 Morse Taper. 2 Spindles with Power Feed. Spindle Speeds 86 - 1920rpm. Table Size 68" x 20". Throat 11 1/4".
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Los 22: Donau Type Dr32 Articulated Drilling and Tapping Machine
Donau Type Dr32 Articulated Drilling and Tapping Machine, Tee Slotted Table 1200mm x 760mm. Drilling Depth 7 1/2". Auxiliary Table 1200mm x 500mm. Height From Table to Spindle 24" Max. Max Throat 1000mm. Power Rise & Fall. Power Locking. Spindle 4 Morse Taper. Speeds 41 - 1800rpm.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Los 23: Meddings Heavy Duty Geared Pillar Drill
Meddings Heavy Duty Geared Pillar Drill, Table 17" x 15". Throat 11". Spindle Taper No.4 Morse. Spindle Speeds 90 - 1570rpm. Power Feed to Spindle. DC Brake.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Los 24: Elliott Model 3E Pedestal Drill
Elliott Model 3E Pedestal Drill, Table 19" x 15". Throat 10". Spindle Taper 3 Morse. Spindle Speeds 60 - 1125rpm.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Los 25: Ajax Arboga Type G2508 Pedestal Drill
Ajax Arboga Type G2508 Pedestal Drill, Table 340mm Diameter. Spindle Speeds 100 - 2900rpm. Throat 9".
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Los 26: Meddings Type LF Pillar Drill
Meddings Type LF Pillar Drill, Table 350mm x 330mm. Throat 90mm. Chuck Capacity 13mm. Single Phase.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Los 27: Kia Turn KT15 Turning Centre
Kia Turn KT15 Turning Centre, Maximum Swing 450mm. Chuck Size 165mm. Machining Centre 165mm. Machining Length 360mm. Bar Capacity 38mm. Spindle Speed 50 - 5,000rpm. Yasnac LX3 Control.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Los 28: Multifeed Type MLI Short Magazine CNC Barfeed
Multifeed Type MLI Short Magazine CNC Barfeed
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Los 29: Swift Type 12SV5 Gap Bed Surfacing and Facing Lathe
Swift Type 12SV5 Gap Bed Surfacing and Facing Lathe, Swing in Gap 54". Length of Gap From Face of Chuck 16". Spindle Bore 4". Spindle Speeds 2 - 230rpm. 36" 4 Jaw Chuck. Length 12' 6". Width 8'.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Los 30: Dean Smith & Grace Boring & Facing Lathe
Dean Smith & Grace Type 2112 Gap Bed Cross Sliding Boring & Facing Lathe, Swing Over Bed 21", Swing In Gap 34", Rapids to Saddle
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.