2773 - Engineering & Fabrication Equipment available on behalf of a Retained Client
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location: These lots are located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com to arrange an appointment.
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 11-20 von 81
Los 11: XYZ Proturn 410 Programmable Centre Lathe
XYZ Proturn 410 Programmable Centre Lathe, Swing Over Bed 470mm, Distance Between Centres 1250rpm. Spindle Speeds 50 - 2500rpm. Swing In Gap 730mm. Swing In Cross Slide 280mm. Spindle Bore 80mm. Prototrak LX3 Control. 3 Point Steady. Quick Change Tool Post. D1-8 Camlock. 10HP Motor.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Los 12: XYZ 1745 Proturn CNC Lathe
XYZ 1745 Proturn CNC Lathe with Prototrak LX2 Control, Swing Over Bed 450mm, Swing Over Cross Slide 260mm, Distance Between Centres 1150mm, Spindle Bore 52mm, Spindle Speeds 40 - 2200rpm, Spindle Nose D1-6 Camlock, Spindle Motor 7.5HP, with 3 Jaw Chuck & Quick Change Tool Post
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Los 13: Harrison Alpha Plus 330S CNC Lathe
Harrison Alpha Plus 330S CNC Lathe with Harrison GE Fanuc Control, Swing Over Bed 330mm. Swing Over Cross Slide 210mm. Distance Between Centres 1000mm. X Axis Travel 180mm. Z Axis Travel 1016mm. Spindle Bore 42mm. Spindle Speeds 0 - 3500rpm. Spindle Motor 7.5kw.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Los 14: Colchester Student VS3000 Toolroom Centre Lathe
Colchester Student VS3000 Toolroom Centre Lathe, Swing Over Bed 13". Distance Between Centres 40", Spindle Bore 1 1/2", Spindle Speeds Variable up to 3000rpm, 3 Jaw Chuck, Face Plate, Drive Plate, 2 Point Steady, 2 Axis Digital Readout.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Los 15: Agie Mondo 20 Star Solid Sink Spark Eroda
Agie Mondo 20 Star Solid Sink Spark Eroda, X Axis 300mm, Y Axis 250mm, Z Axis 250mm, Tank Size 700mm x 450mm x 250mm Deep, Table Size 400mm x 300mm. With 300mm x 150mm Magnetic Chuck. Max Workpice Weight 200kg, Agie Tutura V1PM V1PM Generator and Control, Full load Power 9.9KVA, System 3R Tool Holder, Tool Changer for 4 Tools.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Los 16: Fromag Type CNC E32/425 Keyseating Machine
Fromag Type CNC E32/425 Keyseating Machine, Tee Slotted Table 690mm x 460mm and 400mm Indexing Table. Keyway Width 2 - 32mm. Keyway Length 425mm. Bre Size 10 - 130mm.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Los 17: Asquith Type ODI MK2 14/54 Radial Arm Drill
Asquith Type ODI MK2 14/54 Radial Arm Drill, Radius 4'6". Spindle Taper 4 Morse. Drilling Capacity 2" Diameter. Spindle Speeds 40 - 2040rpm. Drilling Depth 14". Power Locking, DC Telescopic Brake, Box Table 40" x 30" x 20" High.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Los 18: Kitchen & Walker G50x1600 Radial Arm Drilling Machine
Kitchen & Walker G50x1600 Radial Arm Drilling Machine, Radius of Arm 1600mm, Spindle Taper No.5 Morse, Drilling Capacity 75mm, Spindle Speeds 25 - 2000rpm, Drilling Depth 315mm, Workpiece Height 1220mm Max, Power Feeds, Power Locking. Box Table 36" x 30" x 20".
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Los 19: Kitchen & Walker Model 4' E2 Radial Arm Drill
Kitchen & Walker Model 4' E2 Radial Arm Drill, Radius of Arm 4', Spindle Taper No.4 Morse, Spindle Speeds 25 - 1560rpm, Drilling Depth 14", Drilling Capacity 2 1/2", 9 Power Feeds to Spindle, Box Table 32" x 24" x 20". DC Telescopic Brake.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Los 20: Ibarmia Type B-70 Heavy Duty Pedestal Drill
Ibarmia Type B-70 Heavy Duty Pedestal Drill, Table 700mm x 600mm, Throat 400mm, Spindle Taper 5 Morse, Spindle Speeds 80 - 1300rpm, Drilling Depth 250mm, Power Feed & Tapping.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.