Feeler FTC-30 CNC Lathe with LNS Bar Feed with Fanuc OT Control, Swing Over Bed 580mm, Max. Turning Length 620mm, Bar Capacity 76mm, X Axis Travel 225mm, Y Axis Travel 670mm, 12 Station Turret, Tailstock, Collet Chuck, Collets and Tooling, Manuals. S/No. TE082 (1999)

Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

KIA Turn 21 CNC Lathe with Fanuc OT Control, Swing Over Bed 550mm, Max Turning Length 500mm, X Axis Travel 210mm, Z Axis Travel 430mm, 10 Station Turret, Tailstock, Tool Presetter, 200mm 3 Jaw Chuck, Swarf Conveyor. S/No. KT21529 (1997)

Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

KIA Turn 15 CNC Lathe with Fanuc OT Control, Swing Over Bed 551mm, Max. Turning Length 500mm, X Axis Travel 160mm, Z Axis Travel 381mm, Spindle Bore 48mm, 10 Station Turret, Tailstock, Tool Presetter, 150mm 3 Jaw Chuck. S/No. KIA 15410 (1995)

Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Hitachi Seiki Hi Tec Turn 20SII CNC Lathe with Seicos Control, Max. Turning Dia. 210mm, Max. Turning Length 380mm, X Axis Travel 200mm, Z Axis Travel 400mm, C Axis, 16 Station Turret, Parts Catcher, Tool Eye, Swarf Conveyor. S/No. HTS22975

Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

MHP Kingsbury 65 CNC Lathe with Fanuc 18T Control with 300mm 3 Jaw Chuck, 12 Station Turret, Parts Catcher, Swarf Conveyor. S/No. 95-6-244K (1995)

Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

SUGA AT-25 CNC Lathe with Fanuc OT Control, 300mm 3 Jaw Chuck, 12 Station Turret, Swarf Conveyor, Tooling. S/No. E-860

Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Denford Cyclone CNC Lathe on Bench with Fanuc OT Control, Swing Over Bed 300mm, Max. Turning Length 200mm, X Travel 94mm, Z Travel 210mm, 6 Station Turret, 150mm 3 Jaw Chuck, Manual. S/No. CY1000 20AI

Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Colchester Mastif VS 1800 Centre Lathe, 554mm X 3000mm Gap Bed Capacity, 3 & 4 Jaw Chucks. Chuck Guard, Newall C80 2 Axis Digital Read Out, Quick Change Tool Post Plus Holders, Metric Dials. Metric Lead Screw, Metric & Imperial Screw Cutting, 90mm Spindle Bore, 830mm Swing in Gap (2007)

Please Note: This Lot is located in Burntwood. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser. This Item however will be skated to the door ready for collection.

Colchester Mascot VS 2000 Centre Lathe, 460mm x 2000mm Gap Bed Capacity, 3 & 4 Jaw Chucks. Chuck Guard, 2 & 3 Point Steadies, Sony Lh32, 2 Axis Digital Read Out, Quick Change Tool Post Plus Holders, Metric Dials, Metric Lead Screw, Metric & Imperial Screw Cutting, 76mm Spindle Bore, 730mm Swing In Gap. S/No. Mc 0111.

Please Note: This Lot is located in Burntwood and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Gate ECL 550 Gap Bed Lathe with Anilam 4200T Control, 8 station VDI Turret, 2,000mm Between Centres, Swing 550mm, Spindle Speed 80-3,500rpm, 4 Jaw Powered Chuck, 80mm Spindle Bore, A2-8 Spindle Nose, Tailstock, Coolant, Swarf Conveyor, Tooling.
S/No. 071115632 (2007)

Please Note: This Lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Colchester 2000 Lathe 15” x 50” Gap Bed Capacity, 3 & 4 Jaw Chucks, Quick Change Tool Post & Holders, 2 Axis DRO, Ainjest Rapid Threading, 23” Swing In Gap. S/No. 34181

Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Colchester Chipmaster Lathe, 11 1/4" x 20" Capacity, 3 Jaw Chuck, Catch Plate, Quick Change Tool Post Plus Holders, 5 Position Bed Stop, Taper Turning Attachment, Variable Spindle Speeds: 35 - 3000rpm. S/No. G2895.

Please Note: This Lot is located in Burntwood and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser

Colchester Chipmaster Lathe, 3 Jaw Chuck, Chuck Guard, 4 Way Tool Post, Swing Over Cross Slide 7”, Spindle Bore 1⅜, Variable Spindle Speeds 35 – 3000rpm, 11 1/4” x 20” Capacity. S/No. FG7159

Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser

Harrison M500 Lathe, 21" (530mm) x 60" (1500mm) Gap Bed Capacity, 3-Jaw Chuck, Chuck Guard, Newall Topaz 2 Axis Digital Read Out, Metric Dials, 28 3/4" (730mm) Swing In Gap, 3 1/8" (80mm) Spindle Bore, Speeds 31 – 1600. S/No. 500120369

Please Note: This Lot is located in Burntwood and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.

Harrison M300 Centre Lathe, 13" x 25" Capacity, 3 Jaw Chuck

Please Note: This Lot is located in Burntwood and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.