2763 - CNC Bedmills, Lathes, General Workshop Equipment and Ancillaries no longer required by Torneria Meccanica Raimondi Pierangelo, Italy
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location: These lots are located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Käuferprovision
Es gilt ein Aufgeld von 18.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 22.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +39 0732 677 063 or email us at: info@cottandco.it
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences.
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 21-30 von 129
Los 11: PBR T-400 Parallel Lathe
PBR T-400 Parallel Lathe, 3-Jaw Chuck diameter 430mm, Distance between Centres 1600mm, Bore Size 130mm, 3-Jaw Chuck 350mm with Gapbed.
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 12: Momac Tormio Parallel Lathe
Momac Tormio Parallel Lathe with 2100mm distance between Centres, 3-Jaw Chuck Diameter 310mm, 3-Point Steady, 2-Point Steady, Gap Bed and Quick-Change Tooling. S/No. 43445 (2002)
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hier
Los 12A: Quick Change Tooling for Momac Tormio Parallel Lathe
Quick Change Tooling for Momac Tormio Parallel Lathe
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hier
Los *: Combination of Lots 12 & 12A
Combination of Lots 12 & 12A
Momac Tormio Parallel Lathe with 2100mm distance between Centres, 3-Jaw Chuck Diameter 310mm, 3-Point Steady, 2-Point Steady, Gap Bed and Quick-Change Tooling. S/No. 43445 (2002)
and
Quick Change Tooling for Momac Tormio Parallel Lathe
Please Note: These lots are located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Lose in dieser Kombination
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hier| Losnummer | Beschreibung |
|---|---|
| 12 | Momac Tormio Parallel Lathe |
| 12A | Quick Change Tooling for Momac Tormio Parallel Lathe |
Los 13: Tiger FU120 Milling Machine
Tiger FU120 Milling Machine with Table Size 1300mm x 300mm and Tooling Bench
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 14: Tiger FU3L-2-71 Milling Machine
Tiger FU3L-2-71 Milling Machine with Table Size 1600mm x 310mm with Vertical Head and Viking Automation DRO
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 15: Cams 250 SAC Shaper
Cams 250 SAC Shaper with Table Size 560mm x 340mm. S/No. 12537 (1988)
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 16: Azimut 2m Radial Drill
Azimut 2m Radial Drill, Type 1600 X50 with Box Table 630mm x 500mm x 500mm. S/No. 1528A (2002)
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 17: Sasso Torimo TRL 1300 1.6m Radial Drill
Sasso Torimo TRL 1300 1.6m Radial Drill with Box Table 500mm x 630mm x 500mm. S/No. 1390 (1965)
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 18: Bimak Model 25CR Drill
Bimak Model 25CR Drill
Please Note: This Lot is located in Milan, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.