Conemaster CM1 Bar Chamfering Machine. S/No. 5087 (1995)

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Hardinge Conquest GT275P CNC Platten Lathe with GE Fanuc Series 18i T Control, Collet Chuck. Hydrafeed Hydraulic CNC Barfeed. S/No. GTA-1469-B

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Collets Suitable for Hardinge Conquest GT27SP CNC Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of lots 18 & 18A

Lot 18 - Hardinge Conquest GT275P CNC Platten Lathe with GE Fanuc Series 18i T Control, Collet Chuck. Hydrafeed Hydraulic CNC Barfeed. S/No. GTA-1469-B

And

Lot 18A - Collets Suitable for Hardinge Conquest GT27SP CNC Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Hardinge Conquest GT27SP CNC Lathe with GE Fanuc Series 18i T Control, Filtermist, Monosam Sameca Bar Feed. S/No. GTA1529B

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Collets Suitable for Hardinge Conquest GT217SP

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of lots 19 & 19A

Lot 19 - Hardinge Conquest GT27SP CNC Lathe with GE Fanuc Series 18i T Control, Filtermist, Monosam Sameca Bar Feed. S/No. GTA1529B

And

19A - Collets Suitable for Hardinge Conquest GT217SP

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Hardinge CSGT CNC Lathe with GE Fanuc Series 18-T Control, Filtermist, Renishaw Tool Probe, Hatec CS-G1 AM90 Barfeed. S/No. GT-597

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Collets suitable for Hardinge CNC Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of lots 20 & 20A

Lot 20 - Hardinge CSGT CNC Lathe with GE Fanuc Series 18-T Control, Filtermist, Renishaw Tool Probe, Hatec CS-G1 AM90 Barfeed. S/No. GT-597

And

Lot 20A - Collets suitable for Hardinge CNC Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Hardinge CHNC-1 Precision Lathe with GE Fanuc OT Control, 8 Station Turret, Collet Chuck Feedmaster CNC Barfeed. S/No. CN-4246-T

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Tooling and Interchangeable Turrets suitable for Hardinge CHNCI Precision Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Collets suitable for Hardinge CHNCI Precision Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of lots 21, 21A & 21B

Lot 21 Hardinge CHNC-1 Precision Lathe with GE Fanuc OT Control, 8 Station Turret, Collet Chuck Feedmaster CNC Barfeed. S/No. CN-4246-T

And

Lot 21A Tooling and Interchangeable Turrets suitable for Hardinge CHNCI Precision Lathe
And Lot 21B - Collets suitable for Hardinge CHNCI Precision Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Hardinge CHNC 4 Super Precision CNC Lathe with Fanuc GT 6 Series Control, Collet Chuck, 6 Station Turret, Filtermist, Hardinge Retractable Barfeed. S/No. CNC-1160-2A-16

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Collets suitable for Hardinge CHNC 4 Super Precision CNC Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of lots 22 & 22A

Lot 22 - Hardinge CHNC 4 Super Precision CNC Lathe with Fanuc GT 6 Series Control, Collet Chuck, 6 Station Turret, Filtermist, Hardinge Retractable Barfeed. S/No. CNC-1160-2A-16

And

Lot 22A - Collets suitable for Hardinge CHNC 4 Super Precision CNC Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Colchester Bantham 1600 Lathe, Newhall DP7 DRO, 160mm 3 Jaw Chuck, 200mm 4 Jaw Chuck, Quick Change Tooling, Distance between Centres 550mm. S/No. 2/0050/02864

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Colchester Master 2500 Gap Bed Lathe, Distance between Centres 750mm, Quick Change Tooling, 200mm 3 Jaw Chuck, 300mm Face Plate, 250mm 4 Jaw Chuck. S/No. 5/0002/0Z312

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Hardinge Flatbed Lathe, Collet Chuck, Tooling, Barfeed

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Excel XL-1220 Gap Bed Lathe, Newhall Topaz Dro, Distance between Centres 550mm, 160mm 3 Jaw Chuck, Quick Change Tooling, 3 Point Steady, 280mm Face Plate, 160mm 4 Jaw Chuck, 2 Point Steady, Tool Post. S/No. 882

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Excel Gap Bed Lathe, Distance between Centres 550mm, 3 Jaw Chuck 180mm, 280mm Face Plate, 3 Point Steady, 2 Point Steady, 160mm 4 Jaw Chuck, Quick Change Tooling, Toolpost. S/No. 010919 (03/2002)

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Britan Lathe, Collet Chuck. S/No. X1252E

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Britan Lathe, Collet Chuck, Barfeed. S/No. 02998A

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Britan Lathe, Collet Chuck, Barfeed. S/No. J1370

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Accura Tool Lathe, Collet Chuck, Collets.

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Accura Tool Lathe, Collet Chuck, Collets.

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Centrec Horizontal Milling Machine, Table size 635mm x 125mm. S/No. 5236

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Jones & Shipman 540AP Surface Grinder, Dust Extractor & Coolant, 460mm x 150mm Magnetic Chuck. S/No. B0101024

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Victa Eagle Surface Grinder 255mm x 125mm Magnetic Chuck, Dust Extractor. S/No. 186/1067/11/78

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Clarkson Tool & Cutter Grinder. S/No. 10408

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Britan 4 Station Grinder. S/No. 76317

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Wickman Lapping Machine. S/No. 1301

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

200mm SIP Double Ended Grinder

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Pacera Pedestal Drill, Table size 305mm x 305mm. S/No. MF5 26261

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Fobco Bench Drill. S/No. 1408

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Fobco Bench Drill. S/No. 19704

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Tapping Attachment 

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Safan TS255-4 Guillotine, Length 2.5m, Max Thickness 4m.m Midsteel Sheet, 2.m.m Stainless Steel Sheet, Spare Bladed. S/No. B7205 (1995)

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Promegam PPH 25-12B Press Brake 1.2m. S/No. IT125 112 3577 (03/1985)

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Keetona 100mm x 1m Length Pyramid Rolls

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Set of Hand Rolls 50mm x 950mm Length

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Keetona Folder 950mm

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Fobco Pillar Drill, Table size 455mm. S/No. 4958

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Hand Guillotine

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Hand Former

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Murex Transmig 300 Welder

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.Murex Transmig 300 Welder

Wiedemann BR2-149 Hand Operated Multi-punch. S/No. 448100

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Norton 6DB Fly Press

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Norton 5A Fly Press

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Sweeney and Blocksidge Fly Press

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Pedrazzoli Chop Saw, 260mm Blade Size

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Startrite H200A Horizontal Saw, Automatic Roller Conveyor. S/No. 90752

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Startrite Meba Horizontal Saw. S/No. 308

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Startrite 20V Vertical Band Saw, Throat size 500mm, Table size 530mm, Welder. S/No. 113434

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Boschert PN4 Corner Notcher, Table size 710mm x 600mm. S/No. 563 (3/1985)

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

FJ Edwards Corner Notcher

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Vanco Flexiband 7 Horizontal Belt Linisher, Belt size 25mm. S/No. 12822

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

AJH Horizontal Belt Linisher, Belt size 100mm.

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Mobile Hurco Tooling Trolley, Qty BT 40 Tooling

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.