Hurco VM10U Vertical Machining Centre with Max Control, 20m with Renishaw NC4 Laser Tool Probe, 40T ATC, RPM 60 Spindle Part Probe, Swarf Auger, Max Mill V08.01.09.25X5, Table size 198mm, Raiser Block 20 Station ATC, BT40 Tooling, 10K Spindle. S/No. H-VU0052 (01/2010) with Tooling

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Box of BT40 Tooling

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Lang Makro-Grip Vice, Twin Grip 120mm, Jaws. S/No. 47120 Comb

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 1, 1A & 1B

Lot 1 Hurco VM10U Vertical Machining Centre with Max Control, 20m with Renishaw NC4 Laser Tool Probe, 40T ATC, RPM 60 Spindle Part Probe, Swarf Auger, Max Mill V08.01.09.25X5, Table size 198mm, Raiser Block 20 Station ATC, BT40 Tooling, 10K Spindle. S/No. H-VU0052 (01/2010) with Tooling

And

Lot 1A Box of BT40 Tooling

And

Lot 1B Lang Makro-Grip Vice, Twin Grip 120mm, Jaws. S/No. 47120

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

YCM XV560A Vertical Machining Centre with Heidenhain ITNC 520 Control, Spindle AVR Seal, Spindle Chiller, Table size 700mm x 420mm, 20 Station ATC, BT40 Tooling. S/No. 0124 (05/2008)

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

BT40 Tooling

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of lots 2 & 2A

Lot 2 YCM XV5 60A Vertical Machining Centre with Heidenhain ITNC 520 Control, Spindle AVR Seal, Spindle Chiller, Table size 700mm x 420mm, 20 Station ATC, BT40 Tooling. S/No. 0124 (05/2008)

And

Lot 2A BT40 Tooling

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

YCM XV560A Vertical Machining Centre with Heidenhain ITNC530 Control, Spindle Chiller, Tool Touch Probe, Table size 700mm x 420mm, 20 Station ATC, BT40 Tooling. S/No. 0042 (07/2007)

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

BT40 Tooling

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 3 & 3A

Lot 3 YCM XV560A Vertical Machining Centre with Heidenhain ITNC530 Control, Spindle Chiller, Tool Touch Probe, Table size 700mm x 420mm, 20 Station ATC, BT40 Tooling. S/No. 0042 (07/2007)

And

Lot 3A BT40 Tooling

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

YCM XV56A Vertical Machining Centre with Heidenahin ITN530 Control, Spindle Air Seal, Tool Touch Probe, Table size 700mm x 420mm, 20 Station ATC. S/No. 0785 (09/2006) with Tooling

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

BT40 Tooling

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 4 & 4A

Lot 4 YCM XV56A Vertical Machining Centre with Heidenahin ITN530 Control, Spindle Air Seal, Tool Touch Probe, Table size 700mm x 420mm, 20 Station ATC. S/No. 0785 (09/2006) with Tooling

And

Lot 4A BT40 Tooling

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Bridgeport VMC600 XP Vertical Machining Centre with Heidenhain TNC410 Control, Table size 830mm x 410mm, 22 Station ATC, BT40 Tooling. S/No. 722981 (10/2001) with Tooling

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

BT40 Tooling

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of lots 5 & 5A

Lot 5 Bridgeport VMC600 XP Vertical Machining Centre with Heidenhain TNC410 Control, Table size 830mm x 410mm, 22 Station ATC, BT40 Tooling. S/No. 722981 (10/2001) with Tooling

And

Lot 5A BT40 Tooling
Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Bridgeport VMC600/22 Vertical Machining Centre with Heidenhain Control, Table size 830mm x 415mm, 22 Station ATC, BT40 Tooling. S/No. 722683 (06/2000) with Tooling

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

BT40 Tooling

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 6 & 6A

Lot 6 Bridgeport VMC600/22 Vertical Machining Centre with Heidenhain Control, Table size 830mm x 415mm, 22 Station ATC, BT40 Tooling. S/No. 722683 (06/2000) with Tooling

And

Lot 6A BT40 Tooling

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Bridgeport NMC600 Vertical Machining Centre with Heidenhain Control, 22 Station ATC, BT40 Tooling. S/No. 721833 (06/1998) with Tooling

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

BT40 Tooling

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser

Combination of Lots 7 & 7A

Lot 7 Bridgeport NMC600 Vertical Machining Centre with Heidenhain Control, 22 Station ATC, BT40 Tooling. S/No. ,721833 (06/1998) with Tooling

and

Lot 7A BT40 Tooling

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Bridgeport VMC 760 22 Vertical Machining Centre with Heidenhain Control, Table size 1000mm x 490mm, 22 Station ATC, BT40 Tooling. S/No. 21102 (03/1996) with Tooling

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

BT40 Tooling

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 8 & 8A

Lot 8 Bridgeport VMC 760 22 Vertical Machining Centre with Bridgeport Control, Table size 1000mm x 490mm, 22 Station ATC, BT40 Tooling. S/No. 21102 (03/1996) With Tooling

And

Lot 8A BT40 Tooling

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Bridgeport Interact 520 Vertical Machining Centre with Heidenhain TNC 155 Control, 20 Station ATC, BT40 Tooling. S/No. 70329 (03/1988) with Tooling

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

BT40 Tooling

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of lots 9 & 9A

Lot 9 Bridgeport Interact 520 Vertical Machining Centre with Heidenhain TNC 155 Control, 20 Station ATC, BT40 Tooling. S/No. 70329 (03/1988) with Tooling

And

Lot 9A BT40 Tooling

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

XYZ SM2000 Turret Mill, with Protrack SM Control, Power Draw Bar, Table size 127mm x 254mm. S/No. 10387 (2005)

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

ISO30 Tooling suitable for SM2000 Turret Mill

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 10 & 10A

Lot 10 - XYZ SM2000 Turret Mill, with Protrack SM Control, Power Draw Bar, Table size 127mm x 254mm. S/No. 10387 (2005)

And

Lot 10A - ISO30 Tooling suitable for SM2000 Turret Mill

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Qty of ISO 30 Tooling 

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

XYZ Edge 1500 Turret Mill with Protrak Edge Control, Table size 108mm x 230mm, Power Draw Bar. S/No. 000671 (07/2000)

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Collets suitable for XYZ Edge 1500 Turret Mill

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

•Combination of lots 11 & 11A

Lot 11 - XYZ Edge 1500 Turret Mill with Protrak Edge Control, Table size 108mm x 230mm, Power Draw Bar. S/No. 000671 (07/2000)

And

Lot 11A - Collets suitable for XYZ Edge 1500 Turret Mill

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Bridge Port Boring Head
Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

XYZ Edge 1500 Turret Mill with Protrak Edge Control, 230 x 1067mm Table, Power Draw Bar. S/No. 000465 (03/2000)

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Collets suitable for XYZ Edge 1500 Turret Mill

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of lots 12 & 12A

Lot 12 - XYZ Edge 1500 Turret Mill with Protrak Edge Control, 230 x 1067mm Table, Power Draw Bar. S/No. 000465 (03/2000)

And

Lot 12A Collets suitable for XYZ Edge 1500 Turret Mill

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Tapper
Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

XYZ SLX355 CNC Lathe with Protrak SLX Control, 200mm 3 Jaw Chuck, 250mm 4 Jaw Chuck, Quick Change Tooling. S/No. SL350 (2013)

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Quick Change Tooling suitable for XYZ CNC Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Quick Change Tooling suitable for XYZ CNC Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Quick Change Tooling suitable for XYZ CNC Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Quick Change Tooling suitable for XYZ CNC Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of lots 13 – 13D

Lot 13 - XYZ SLX355 CNC Lathe with Protrak SLX Control, 200mm 3 Jaw Chuck, 250mm 4 Jaw Chuck, Quick Change Tooling. S/No. SL350 (2013)

Lot 13A - Quick Change Tooling suitable for XYZ CNC Lathe

Lot 13B - Quick Change Tooling suitable for XYZ CNC Lathe

Lot 13C - Quick Change Tooling suitable for XYZ CNC Lathe

Lot 13D - Quick Change Tooling suitable for XYZ CNC Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

XYZ KR-L360 CNC Lathe with Protrak VL Control, Collet Chuck with Collets, 200mm 3 Jaw Chuck, Quick Change Tooling. S/No. SL026 (2003)

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Quick Change Tooling suitable for XYZ CNC Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Quick Change Tooling suitable for XYZ CNC Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Quick Change Tooling suitable for XYZ CNC Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Quick Change Tooling suitable for XYZ CNC Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of lots 14 – 14D

Lot 14 - XYZ KR-L360 CNC Lathe with Protrak VL Control, Collet Chuck with Collets, 200mm 3 Jaw Chuck, Quick Change Tooling. S/No. SL026 (2003)

Lot 14A - Quick Change Tooling suitable for XYZ CNC Lathe

Lot 14B - Quick Change Tooling suitable for XYZ CNC Lathe

Lot 14C - Quick Change Tooling suitable for XYZ CNC Lathe

Lot 14D - Quick Change Tooling suitable for XYZ CNC Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Doosan Lynx 220B 2 Axis CNC Lathe with Fanuc oi-TB Series Control, 12 Station Turret, Parts Catcher, 210mm 3 Jaw Chuck, Collet Chuck, Tailstock, Tooleye. S/No. L2200921 (03/2006) LNS Ecoload Barfeed LNS Bar Plus

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Collets suitable for Lynx 220 CNC Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of lots 15 & 15A

Lot 15 - Doosan Lynx 220B 2 Axis CNC Lathe with Fanuc oi-TB Series Control, 12 Station Turret, Parts Catcher, 210mm 3 Jaw Chuck, Collet Chuck, Tailstock, Tooleye. S/No. L2200921 (03/2006) LNS Ecoload Barfeed LNS Bar Plus

And

Lot 15A - Collets suitable for Lynx 220 CNC Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Daewoo Lynx 200B 2 Axis CNC Lathe with Fanuc Series 21-IT Control, 10 Station Turret, Parts Catcher, 200mm 3 Jaw Chuck, Tooleye. S/No. L200 0253 (01/1998) Multifeed ML1 Short Magazine CNC Barfeed S/No. 003290 (1998)

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Sleeves with Collets suitable for Lynx 200 CNC Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Collets Suitable for Lynx 200 CNC Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of lots 16, 16A & 16B

Lot 16 - Daewoo Lynx 200B 2 Axis CNC Lathe with Fanuc Series 21-IT Control, 10 Station Turret, Parts Catcher, 200mm 3 Jaw Chuck, Tooleye. S/No. L200 0253 (01/1998) Multifeed ML1 Short Magazine CNC Barfeed S/No. 003290 (1998)

And

Lot 16A - Sleeves with Collets suitable for Lynx 200 CNC Lathe

And

Lot 16B - Collets Suitable for Lynx 200 CNC Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Daewoo Puma 10HC 2 Axis CNC Lathe with Fanuc Series 0-T Control, 10 Station Turret, 250mm 3 Jaw Chuck, Tailstock, Tooleye, Filtermist. S/No. PH100700 (9/1996) Multifeed ML1 Short Magazine CNC Barfeed. S/No. 002953 (1997)

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.