Please click here to view a brochure for this auction

Hurco VM10U 5-Axis Vertical Machining Centre with Win Max V08.01.09.25X5 Control, Renishaw NC4 Laser Tool Probe, 20-Station ATC, 10,000rpm Spindle, Swarf Auger, Table size/diameter: 198mm, Raiser Block, BT40 Tooling. S/No. H-VU0052 (01/2010) with Tooling

Please Note: This lot is located in Essex. There will be no charge for the electrical disconnection of this machine. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Box of BT40 Tooling

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Lang Makro-Grip Vice, Twin Grip 120mm, Jaws. S/No. 47120 

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 1, 1A & 1B

Lot 1 Hurco VM10U Vertical Machining Centre with Win Max V08.01.09.25X5 Control, Renishaw NC4 Laser Tool Probe, 20-Station ATC, 10,000rpm Spindle, Swarf Auger, Table size/diameter: 198mm, Raiser Block, BT40 Tooling. S/No. H-VU0052 (01/2010) with Tooling

And

Lot 1A Box of BT40 Tooling

And

Lot 1B Lang Makro-Grip Vice, Twin Grip 120mm, Jaws. S/No. 47120

Please Note: This lot is located in Essex. There will be no charge for the electrical disconnection of this machine. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

YCM XV560A Vertical Machining Centre with Heidenhain ITNC 530 Control, Spindle Air Seal, Spindle Chiller, Table Size: 700mm x 420mm, 20-Station ATC, BT40 Tooling. S/No. 0124 (05/2008)

Please Note: This lot is located in Essex. There will be no charge for the electrical disconnection of this machine. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

BT40 Tooling

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of lots 2 & 2A

Lot 2 YCM XV560A Vertical Machining Centre with Heidenhain ITNC 530 Control, Spindle Air Seal, Spindle Chiller, Table Size: 700mm x 420mm, 20-Station ATC, BT40 Tooling. S/No. 0124 (05/2008)

And

Lot 2A BT40 Tooling

Please Note: This lot is located in Essex. There will be no charge for the electrical disconnection of this machine. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

YCM XV560A Vertical Machining Centre with Heidenhain ITNC530 Control, Spindle Chiller, Tool Touch Probe, Table Size: 700mm x 420mm, 20-Station ATC, BT40 Tooling. S/No. 0042 (07/2007)

Please Note: This lot is located in Essex. There will be no charge for the electrical disconnection of this machine. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

BT40 Tooling

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 3 & 3A

Lot 3 YCM XV560A Vertical Machining Centre with Heidenhain ITNC530 Control, Spindle Chiller, Tool Touch Probe, Table Size: 700mm x 420mm, 20-Station ATC, BT40 Tooling. S/No. 0042 (07/2007)

And

Lot 3A BT40 Tooling

Please Note: This lot is located in Essex. There will be no charge for the electrical disconnection of this machine. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

YCM XV560A Vertical Machining Centre with Heidenhain ITN530 Control, Spindle Air Seal, Tool Touch Probe, Table Size: 700mm x 420mm, 20-Station ATC. S/No. 0785 (09/2006) with Tooling

Please Note: This lot is located in Essex. There will be no charge for the electrical disconnection of this machine. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

BT40 Tooling

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 4 & 4A

Lot 4 YCM XV560A Vertical Machining Centre with Heidenhain ITN530 Control, Spindle Air Seal, Tool Touch Probe, Table Size: 700mm x 420mm, 20-Station ATC. S/No. 0785 (09/2006) with Tooling

And

Lot 4A BT40 Tooling

Please Note: This lot is located in Essex. There will be no charge for the electrical disconnection of this machine. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Bridgeport VMC600 XP Vertical Machining Centre with Heidenhain TNC410M Control, Table Size: 830mm x 410mm, 22-Station ATC, BT40 Tooling. S/No. 722981 (10/2001) with Tooling

Please Note: This lot is located in Essex. There will be no charge for the electrical disconnection of this machine. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

BT40 Tooling

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of lots 5 & 5A

Lot 5 Bridgeport VMC600 XP Vertical Machining Centre with Heidenhain TNC410M Control, Table Size: 830mm x 410mm, 22-Station ATC, BT40 Tooling. S/No. 722981 (10/2001) with Tooling

And

Lot 5A BT40 Tooling

Please Note: This lot is located in Essex. There will be no charge for the electrical disconnection of this machine. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Bridgeport VMC600/22 Vertical Machining Centre with Heidenhain 410PA Control, 4th Axis Indexing Unit, Table Size: 830mm x 415mm, 22-Station ATC, BT40 Tooling. S/No. 722683 (06/2000) with Tooling and PTG Model 125 Speed Indexer.

Please Note: This lot is located in Essex. There will be no charge for the electrical disconnection of this machine. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

BT40 Tooling

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 6 & 6A

Lot 6 Bridgeport VMC600/22 Vertical Machining Centre with Heidenhain 410PA Control, 4th Axis Indexing Unit, Table Size: 830mm x 415mm, 22-Station ATC, BT40 Tooling. S/No. 722683 (06/2000) with Tooling

And

Lot 6A BT40 Tooling

Please Note: This lot is located in Essex. There will be no charge for the electrical disconnection of this machine. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Bridgeport VMC600 22 Vertical Machining Centre with Heidenhain TNC 410 Control, 22-Station ATC, Table Size: 830 x 415mm, BT40 Tooling. S/No. 721833 (06/1998) with Tooling

Please Note: This lot is located in Essex. There will be no charge for the electrical disconnection of this machine. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

BT40 Tooling

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser

Combination of Lots 7 & 7A

Lot 7 Bridgeport VMC600 22 Vertical Machining Centre with Heidenhain TNC 410 Control, 22-Station ATC, Table Size: 830 x 415mm, BT40 Tooling. S/No. 721833 (06/1998) with Tooling

and

Lot 7A BT40 Tooling

Please Note: This lot is located in Essex. There will be no charge for the electrical disconnection of this machine. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Bridgeport VMC760 22 Vertical Machining Centre with Heidenhain TNC 370 Control, Table Size: 1,000mm x 490mm, 22-Station ATC, BT40 Tooling. S/No. 21102 (03/1996) with Tooling

Please Note: This lot is located in Essex. There will be no charge for the electrical disconnection of this machine. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

BT40 Tooling

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 8 & 8A

Lot 8 Bridgeport VMC760 22 Vertical Machining Centre with Heidenhain TNC 370 Control, Table Size: 1,000mm x 490mm, 22-Station ATC, BT40 Tooling. S/No. 21102 (03/1996) with Tooling

And

Lot 8A BT40 Tooling

Please Note: This lot is located in Essex. There will be no charge for the electrical disconnection of this machine. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Bridgeport Interact 520 Vertical Machining Centre with Heidenhain TNC 155 Control, Table Size: 860 x 380mm, 20-Station ATC, BT40 Tooling. S/No. 70329 (03/1988) with Tooling

Please Note: We have been informed there is an intermittent error on the vertical axis encoder, please take this consideration when bidding

Please Note: This lot is located in Essex. There will be no charge for the electrical disconnection of this machine. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

BT40 Tooling

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of lots 9 & 9A

Lot 9 Bridgeport Interact 520 Vertical Machining Centre with Heidenhain TNC 155 Control, Table Size: 860 x 380mm, 20-Station ATC, BT40 Tooling. S/No. 70329 (03/1988) with Tooling

Please Note: We have been informed there is an intermittent error on the vertical axis encoder, please take this consideration when bidding

and

Lot 9A BT40 Tooling

Please Note: This lot is located in Essex. There will be no charge for the electrical disconnection of this machine. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

XYZ SM2000 Turret Mill with Prototrack SM Control, Power Draw Bar, Table Size: 1270mm x 254mm. S/No. 10387 (2005)

Please Note: This lot is located in Essex. There will be no charge for the electrical disconnection of this machine. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

ISO30 Tooling suitable for SM2000 Turret Mill

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 10 & 10A

Lot 10 - XYZ SM2000 Turret Mill with Prototrack SM Control, Power Draw Bar, Table Size: 1270mm x 254mm. S/No. 10387 (2005)

And

Lot 10A - ISO30 Tooling suitable for SM2000 Turret Mill

Please Note: This lot is located in Essex. There will be no charge for the electrical disconnection of this machine. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Qty of ISO 30 Tooling 

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

XYZ Edge 1500 Turret Mill with Prototrak Edge Control, Table Size: 1067mm x 230mm, Power Draw Bar. S/No. 000671 (07/2000)

Please Note: This lot is located in Essex. There will be no charge for the electrical disconnection of this machine. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Collets suitable for XYZ Edge 1500 Turret Mill

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of lots 11 & 11A

Lot 11 - XYZ Edge 1500 Turret Mill with Prototrak Edge Control, Table Size: 1067mm x 230mm, Power Draw Bar. S/No. 000671 (07/2000)

And

Lot 11A - Collets suitable for XYZ Edge 1500 Turret Mill

Please Note: This lot is located in Essex. There will be no charge for the electrical disconnection of this machine. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Bridgeport Boring Head

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

XYZ Edge 1500 Turret Mill with Prototrak Edge Control, Table Size: 1067mm x 230mm, Power Draw Bar. S/No. 000465 (03/2000)

Please Note: This lot is located in Essex. There will be no charge for the electrical disconnection of this machine. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Collets suitable for XYZ Edge 1500 Turret Mill

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of lots 12 & 12A

Lot 12 - XYZ Edge 1500 Turret Mill with Prototrak Edge Control, Table Size: 1067mm x 230mm, Power Draw Bar. S/No. 000465 (03/2000)

And

Lot 12A Collets suitable for XYZ Edge 1500 Turret Mill

Please Note: This lot is located in Essex. There will be no charge for the electrical disconnection of this machine. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Tapper

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

XYZ Proturn SLX355 CNC Lathe with Prototrak SLX Control, 200mm 3-Jaw Chuck, 250mm 4-Jaw Chuck, Quick Change Tooling. S/No. SL350 (2013)

Please Note: This lot is located in Essex. There will be no charge for the electrical disconnection of this machine. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Quick Change Tooling suitable for XYZ CNC Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Quick Change Tooling suitable for XYZ CNC Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Quick Change Tooling suitable for XYZ CNC Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Quick Change Tooling suitable for XYZ CNC Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 13 – 13D

Lot 13 - XYZ Proturn SLX355 CNC Lathe with Prototrak SLX Control, 200mm 3-Jaw Chuck, 250mm 4-Jaw Chuck, Quick Change Tooling. S/No. SL350 (2013)

Lot 13A - Quick Change Tooling suitable for XYZ CNC Lathe

Lot 13B - Quick Change Tooling suitable for XYZ CNC Lathe

Lot 13C - Quick Change Tooling suitable for XYZ CNC Lathe

Lot 13D - Quick Change Tooling suitable for XYZ CNC Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

XYZ VL 355 CNC Lathe with Prototrak VL Control, Collet Chuck with Collets, 200mm 3-Jaw Chuck, Quick Change Tooling. S/No. SL026 (2003)

Please Note: This lot is located in Essex. There will be no charge for the electrical disconnection of this machine. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Quick Change Tooling suitable for XYZ CNC Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Quick Change Tooling suitable for XYZ CNC Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Quick Change Tooling suitable for XYZ CNC Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Quick Change Tooling suitable for XYZ CNC Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of lots 14 – 14D

Lot 14 - XYZ VL 355 CNC Lathe with Prototrak VL Control, Collet Chuck with Collets, 200mm 3-Jaw Chuck, Quick Change Tooling. S/No. SL026 (2003)

Lot 14A - Quick Change Tooling suitable for XYZ CNC Lathe

Lot 14B - Quick Change Tooling suitable for XYZ CNC Lathe

Lot 14C - Quick Change Tooling suitable for XYZ CNC Lathe

Lot 14D - Quick Change Tooling suitable for XYZ CNC Lathe

Please Note: This lot is located in Essex. There will be no charge for the electrical disconnection of this machine. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Doosan Lynx 220B 2-Axis CNC Lathe with Fanuc Oi-TB Series Control, 12-Station Turret, Parts Catcher, 210mm 3-Jaw Chuck, Collet Chuck, Tailstock, Tooleye. S/No. L2200921 (03/2006) & LNS Ecoload Barfeed with LNS Bar Plus

Please Note: This lot is located in Essex. There will be no charge for the electrical disconnection of this machine. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Collets suitable for Lynx 220 CNC Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of lots 15 & 15A

Lot 15 - Doosan Lynx 220B 2-Axis CNC Lathe with Fanuc Oi-TB Series Control, 12-Station Turret, Parts Catcher, 210mm 3-Jaw Chuck, Collet Chuck, Tailstock, Tooleye. S/No. L2200921 (03/2006) & LNS Ecoload Barfeed with LNS Bar Plus

And

Lot 15A - Collets suitable for Lynx 220 CNC Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Daewoo Lynx 200B 2-Axis CNC Lathe with Fanuc Series 21-iT Control, 10-Station Turret, Parts Catcher, 200mm 3-Jaw Chuck, Tooleye. S/No. L200 0253 (01/1998) & Multifeed ML1 Short Magazine CNC Barfeed S/No. 003290 (1998)

Please Note: This lot is located in Essex. There will be no charge for the electrical disconnection of this machine. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Sleeves with Collets suitable for Lynx 200 CNC Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Collets Suitable for Lynx 200 CNC Lathe

Please Note: This lot is located in Essex. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Combination of lots 16, 16A & 16B

Lot 16 - Daewoo Lynx 200B 2-Axis CNC Lathe with Fanuc Series 21-iT Control, 10-Station Turret, Parts Catcher, 200mm 3-Jaw Chuck, Tooleye. S/No. L200 0253 (01/1998) & Multifeed ML1 Short Magazine CNC Barfeed S/No. 003290 (1998)

And

Lot 16A - Sleeves with Collets suitable for Lynx 200 CNC Lathe

And

Lot 16B - Collets Suitable for Lynx 200 CNC Lathe

Please Note: This lot is located in Essex. There will be no charge for the electrical disconnection of this machine. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Daewoo Puma 10HC 2-Axis CNC Lathe with Fanuc Series 0-T Control, 10-Station Turret, 250mm 3-Jaw Chuck, Tailstock, Tooleye, Filtermist. S/No. PH100700 (9/1996) & Multifeed ML1 Short Magazine CNC Barfeed. S/No. 002953 (1997)

Please Note: This lot is located in Essex. There will be no charge for the electrical disconnection of this machine. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.