2727 - SMF, Mag Plastic & AOKI Blow Moulding Machines & Ancillary Equipment previously used in the Manufacturing of Detergent & Soap Bottles by Pizzolotto Detersivi dal 1919 srl, Belluno, Italy, Phase 2
In Zusammenarbeit mit
Miscellaneous
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Please Note: These lots are located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Käuferprovision
Es gilt ein Aufgeld von 18.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 22.00 %.
Seitenaufrufe
Viewing is available by appointment only with the Auctioneer. Please contact our UK Office on: +44 (0) 121 328 2424 or our Italian Office on + 39 0732 677 063 or email info@cottandco.it
The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Italian export conditions and the obtaining of any applicable Export Licences.
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 11-20 von 36
Los *: Combination of lots 8 & 8A
Combination of lots 8 & 8A
AOKI SB III 500 LL 75 Injection Stretch Blow Moulding Machine. S/No. 9350090 (1993) with Control Panel, Dehumidifying Dryer and Hopper Loader, 4 Cavities, used to Produce 1 litre Bottles
Please Note: Green Blowers have been removed and not included in this lot.
and
Moulds for AOKI Machine
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €3630
Lose in dieser Kombination
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hier| Losnummer | Beschreibung |
|---|---|
| 8 | AOKI SB III 500 LL 75 Injection Stretch Blow Moulding Machine |
| 8A | Moulds for AOKI Machine |
Los 16: Spare Clamp suitable for TECHNE 15000S Blow Moulding Machines
Spare Clamp suitable for TECHNE 15000S Blow Moulding Machines
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €30
Los 17: AUTOMA FLUS PACK 850/2V Blow Moulding Machine
AUTOMA FLUS PACK 850/2V Blow Moulding Machine
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €430
Los 18: MAGIC MG-L2ND Blow Moulding Machine
MAGIC MG-L2ND Blow Moulding Machine. S/No. 3-85 (1985)
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €430
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hier
Los 18A: Various Tooling for AUTOMA and MAGIC MAX 3
Various Tooling for AUTOMA and MAGIC MAX 3
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €50
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hier
Los *: Combination of lots 18 & 18A
Combination of lots 18 & 18A
MAGIC MG-L2ND Blow Moulding Machine. S/No. 3-85 (1985)
and
Various Tooling for AUTOMA and MAGIC MAX 3
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €480
Lose in dieser Kombination
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hier| Losnummer | Beschreibung |
|---|---|
| 18 | MAGIC MG-L2ND Blow Moulding Machine |
| 18A | Various Tooling for AUTOMA and MAGIC MAX 3 |
Los 27: (3) Galvanised Containers
(3) Galvanised Containers dim. 110 X 110 X 160
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site.
The cost for Dismantling and Loading this item to a suitable vehicle is €30
Los 65: 6 Section Bottle Storage and Delivery System
6 Section Bottle Storage and Delivery System with Vibrator and Control Panel
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site. Dismantling and Loading will be at the cost of the purchaser.
Los 66: 7 Section Bottle Storage and Delivery System
7 Section Bottle Storage and Delivery System with Vibrator and Control Panel
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site. Dismantling and Loading will be at the cost of the purchaser.
Los 67: 7 Section Bottle Storage and Delivery System
7 Section Bottle Storage and Delivery System with Conveyors and Control Panel
Please Note: This lot is located in Belluno, Italy. Unfortunately, there are no loading facilities available on-site. Dismantling and Loading will be at the cost of the purchaser.