2726 - Phase 1 - Large Capacity Boring Mills, Horizontal and Vertical Turning Lathes, Toolroom and Fabrication Equipment surplus to the ongoing requirements of Howden CKD Compressors s.r.o.

In Association With

Engineering

Auction ended on

2019-02-06 15:00:00.0

Time left

Auction finished

Auction description

NEW LOT ADDED TO THIS AUCTION 

Location: These lots are located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Buyer's premium

Buyer's Premium will be charged at 18.00%.

VAT

Value added tax will be charged at 21.00%.

Viewing times

Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all Czech Republic export conditions and the obtaining of any applicable Export Licences

Please tick the box below and press confirm


* Please Note:- Any translation by using Google Translate is not guaranteed as an accurate translation and is for guide purposes only. The English lot description is the overriding description and is given the best knowledge of the auctioneer. However, the accuracy is not guaranteed and should be verified by the buyer prior to bidding.

Notice to purchasers

Final payment date

2019-02-08 17:00:00.0

Final clearance date

2019-02-21 17:00:00.0

Shipping agents

Storage contractors

Exporting/Importing from the UK details

Lots 101-110 of 152

Bidding will be extended on individual lots if bids are placed within 10 minutes of the item's end time.
Preview image
Ends:
06 Feb 2019 16:50:00 GMT
Time left:
Bidding ended
Buyer's premium:
18.00%
VAT rate:
21.00%

Lot 40: Hydraulic 4-Pillar Press

Hydraulic 4-Pillar Press, Table Size 160mm x 175mm

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Ends:
06 Feb 2019 15:40:00 GMT
Time left:
Bidding ended
Buyer's premium:
18.00%
VAT rate:
21.00%

Lot 41: Small Hydraulic Press

Small Hydraulic Press, Table Size 630mm

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Ends:
06 Feb 2019 15:30:00 GMT
Time left:
Bidding ended
Buyer's premium:
18.00%
VAT rate:
21.00%

Lot 42: Chopsaw

Chopsaw, Blade Saw 220mm

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Ends:
06 Feb 2019 16:30:00 GMT
Time left:
Bidding ended
Buyer's premium:
18.00%
VAT rate:
21.00%

Lot 43: MAS VR4A Radial Drill

MAS VR4A Radial Drill, 1.4m Box Table 1m x 750mm x 500mm

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Ends:
06 Feb 2019 15:20:00 GMT
Time left:
Bidding ended
Buyer's premium:
18.00%
VAT rate:
21.00%

Lot 44: Hydraulic Press

Hydraulic Press, Table Size 600mm x 560mm

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Ends:
06 Feb 2019 15:30:00 GMT
Time left:
Bidding ended
Buyer's premium:
18.00%
VAT rate:
21.00%

Lot 45: MAS VRM 50A Portable Radial Drill

MAS VRM 50A Portable Radial Drill (1962)

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Ends:
06 Feb 2019 15:30:00 GMT
Time left:
Bidding ended
Buyer's premium:
18.00%
VAT rate:
21.00%

Lot 46: TOS SN55-71 Centre Lathe

TOS SN55-71 Centre Lathe, 2m Distance between centres, 310mm 4-Jaw Chuck, 3-Jaw Steady. S/No. 250620124

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Ends:
06 Feb 2019 15:50:00 GMT
Time left:
Bidding ended
Buyer's premium:
18.00%
VAT rate:
21.00%

Lot 47: TOS SUS63 Lathe

TOS SUS63 Lathe, Distance between centres 1.4m, 4-Jaw Chuck 310mm, 3-Jaw Chuck 310mm, 3-Point Steady. S/No. 0440704

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Ends:
06 Feb 2019 16:50:00 GMT
Time left:
Bidding ended
Buyer's premium:
18.00%
VAT rate:
21.00%

Lot 48: TOS SU50 Lathe

TOS SU50 Lathe, 1.6m Distance between centres, 310mm 3-Jaw Chuck. S/No. 21205421

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Preview image
Ends:
06 Feb 2019 17:00:00 GMT
Time left:
Bidding ended
Buyer's premium:
18.00%
VAT rate:
21.00%

Lot 50: TOS FA5B Vertical Mill

TOS FA5B Vertical Mill, Table Size 2m x 450mm. S/No. 1167 95 40324

Please Note: This lot is located in Prague, Czech Republic. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Vehicles
Woodworking

Categories