2720 - Engineering & Fabrication Equipment available on behalf of a Retained Client
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Please Note: These lots are located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 41-50 von 136
Los 41: WMW SAALFELD BS4AI Single Spindle Drill
WMW SAALFELD BS4AI Single Spindle Drill, Table 700mm x 580mm, 4 Morse Taper, Spindle Speeds 63 - 1000rpm, Power Feed to Spindle.
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Los 42: Pollard Model 150A/6 Six Spindle In Line Drilling Machine
Pollard Model 150A/6 Six Spindle In Line Drilling Machine, All Spindles 3 Morse Taper, 2 Spindles with Power Feed. Spindle Speeds 86 - 1920rpm, Table Size 68" x 20", Throat 11 1/".
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Los 43: Herbert 6 Spindle Drilling & Tapping Machine
Herbert 6 Spindle Drilling & Tapping Machine, 5 Spindles No.2 Morse Taper with Electronic Tapping, Spindle Speeds 450 - 2850rpm, 1 Spindle No.2 Flash Tapper with Box of Pitch Gears, Capacity 3mm - 12mm, Table Size 68" x 15". Throat 8 3/4", All 6 Spindles with Coolant.
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Los 44: Fobco 7/Eight Pillar Drill
Fobco 7/Eight Pillar Drill, Table 20' x 18", Spindle Taper 2 Morse, Spindle Speeds 51 - 2650
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Los 45: Fobco 7/Eight Single Spindle Drill
Fobco 7/Eight Single Spindle Drill, Table 18" x 15", Throat 10", Spindle 2 Morse 7/8", Spindle Speeds 51 - 2650rpm.
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Los 46: Startrite EFI Geared Head Pillar Drill
Startrite EFI Geared Head Pillar Drill, Spindle Taper No.3 Morse, Drilling Capacity 1 1/4" Diameter, Spindle Speeds 95 - 2700rpm, Throat Depth 12", Compound Table Size 18" x 6", Rise & Fall, Swivel & Tilt Table, Rise & Fall Head, Power Feed to Spindle, Foot Control
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Los 47: Archdale 5' Radial Arm Drill
Archdale 5' Radial Arm Drill, Spindle Taper 4 Morse, Spindle Speeds 80 - 2000rpm.
Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser
Los 48: Meca 6 Spindle Turret Drill
Meca 6 Spindle Turret Drill, Table 20" x 16" with Compound Table, Turret Tools Including 70X Tapmatic Reversable Tapping Attachments.
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Los 49: Otto Muller SR30 Radial Arm Drill
Otto Muller SR30 Radial Arm Drill, Spindle Taper No.3 Morse, Spindle Speeds 250 - 1500rpm, Table Size 1140 x 550mm, Power Feed & Tapping
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Los 50: Wadkin Articulated Arm Drilling Machine
Wadkin Articulated Arm Drilling Machine, 3 Morse Spindle Taper, Throat 50" with Box Table 36" x 33" x 20".
Please Note: This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.