Brother TC-32 BNQT CNC Machining Centre with Brother B00 CNC Control, X = 550mm Y = 400mm Z = 415mm (2) 420mm x 600mm Tables, Renishaw Tool Probe to each Table, DTS10 4th & 5th Axis Unit to one Table, 40-Station HSK40 Tool Changer, 16,000rpm Spindle, Through Spindle Coolant, Spindle Probe, DMF Extraction Unit. S/No. 121301 (2008)

Please Note: 3R Macro work-holding adaptor (nose of indexing table) included in this sale.

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

HSK A40 Tooling for Brother TC-32BN Back Ends Only

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.

HSK A40 Tooling for Brother TC-32BN Back Ends Only

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.

Combination of lots 1, 1A & 1B

Brother TC-32 BNQT CNC Machining Centre with Brother B00 CNC Control, X = 550mm Y = 400mm Z = 415mm (2) 420mm x 600mm Tables, Renishaw Tool Probe to each Table, DTS10 4th & 5th Axis Unit to one Table, 40-Station HSK40 Tool Changer, 16,000rpm Spindle, Through Spindle Coolant, Spindle Probe, DMF Extraction Unit. S/No. 121301 (2008)

Please Note: 3R Macro work-holding adaptor (nose of indexing table) included in this sale

and

HSK A40 Tooling for Brother TC-32BN Back Ends Only

and

HSK A40 Tooling for Brother TC-32BN Back Ends Only

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.

Brother TC-S2C CNC Drill Tapping Centre with Brother CVC B00 CNC Control, X = 500mm Y = 400mm Z = 300mm 600mm x 320mm Table Nikken 4th Axis Unit with Tailstock 10-Station Toolchanger BT30, 10,000rpm Spindle. S/No. 112722 (2007)

Please Note: 3R Macro work-holding adaptor (nose of indexing table) included in this sale.

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

BT30 Tooling for Brother TC-S2C

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.

Combination of lot 2 & 2A

Brother TC-S2C CNC Drill Tapping Centre with Brother CVC B00 CNC Control, X = 500mm Y = 400mm Z = 300mm 600mm x 320mm Table Nikken 4th Axis Unit with Tailstock 10-Station Toolchanger BT30, 10,000rpm Spindle. S/No. 112722 (2007)

 Please Note: 3R Macro work-holding adaptor (nose of indexing table) included in this sale.

and

BT30 Tooling for Brother TC-S2C

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.

Brother TC-S2B CNC Drill Tapping Centre with Brother A00 CNC Control, X = 500mm Y = 400mm Z = 300mm, 600mm x 300mm Table, 21 Station BT30 Toolchanger, 10,000rpm Spindle, Through Spindle Coolant. S/No. 111310 (2003)

Please Note: Any 3R Tool Holders or Fixtures that may be shown are not included in this lot

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Sodick AQ327L Premium Wire EDM with Sodick LP 33W CNC Premium Control, A.W.F, 650mm x 850mm Tank Size, Taper Cutting (U & V Axis) X = 750mm Y = 500mm Z = 400mm, Linear Motors (XYU Axis), Linear Glass Scale (XYU Axis). S/No. 1190 (2007)

Please Note: Any 3R Tool Holders or Fixtures that may be shown are not included in this lot

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

3R Tooling System

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 4 & 4A

Sodick AQ327L Premium Wire EDM with Sodick LP 33W CNC Premium Control, A.W.F, 650mm x 850mm Tank Size, Taper Cutting (U & V Axis) X = 750mm Y = 500mm Z = 400mm, Linear Motors (XYU Axis), Linear Glass Scale (XYU Axis). S/No. 1190 (2007)

Please Note: Any 3R Tool Holders or Fixtures that may be shown are not included in this lot

and

3R Tooling System

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.

Sodick AQ35L Ram Type EDM with Sodick LQ1G Touch Screen Control, 4 Axis X = 355mm Y = 254mm Z = 254mm Movements, C Axis to Ram, 4 Station ATC, 400mm x 600mm Table Size, Fire Extinquisher. S/No. 2289 (2007)

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Hardinge CHNCI Flatbed CNC Lathe with Fanuc OT Control, 8-Station Cross Slide Turret, Collet Nose, Part off Slide, Filtermist Unit, 5000rpm Spindle, Hardinge Inbuilt Barfeed Attachment. S/No. CN-4371-T

Please Note: Any cutting tools that may be shown are not included with this lot.

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Hardinge Tooling Collets

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.

Hardinge Tooling Collets

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.

Combination of Lots 6, 6A & 6B

Hardinge CHNCI Flatbed CNC Lathe with Fanuc OT Control, 8-Station Horizontal Turret, Collet Nose, Part Off Slide, Filtermist Unit, 5000 RPM Spindle, Hardinge Inbuilt Barfeed Attachment. S/No. CN-4371-T

and

Hardinge Tooling Collets

and

Hardinge Tooling Collets

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.

Datron CAT 3D-MXL High Speed Router, 1.1m x 3m Table Size, 10-Station Tool Hire, Rotary 4th Axis Unit, Broken Tool Reflection, Spindle Mounted Probe, 60,000rpm Spindle, 3D Servo System, Windows Based XP. S/No. 50840 (2003)

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

XYZ Pro 3000 CNC Turret Milling Machine with Proto Trak AGE3 3 Axis Control, 300mm x 1450mm Table, Powered Draw Bar, 70 to 3600rpm Spindle Speed, PTG 4th Axis Unit. S/No. 9497 (2001)

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Qty of International Tooling

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.

Combination of lots 8 & 8A

XYZ Pro 3000 CNC Turret Milling Machine with Proto Trak AGE3 3 Axis Control, 300mm x 1450mm Table, Powered Draw Bar, 70 to 3600rpm Spindle Speed, PTG 4th Axis Unit. S/No. 9497 (2001)

and

Qty of International Tooling

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.

Semco Model LC-186VS CNC Turret Milling Machine with Anilam 3000m 3 Axis Control, 250mm x 1270mm Table Size, Powered Draw Bar. S/No. 85041498

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Gate PBM-1000 Turret Milling Machine with Newall DP700 3 Axis DRO with 1.07m x 230mm Table Size, 60-4200rpm Spindle Speed, Powerfeed to X Axis. S/No. 201411011 (2014)

Please Note: The vice is not included with this lot 

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Colchester Student 1800 Straight Bed Lathe, 40’’ between Centres, Quick Change Tool Post, Dual Dials, Collet Attachment, 2 & 3 Point Steadies, Anilam Wizard 2 Axis DRO Ainjest Threading Unit. S/No. 4/0003/06041X

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Jones & Shipman 540P Surface Grinder with Power Rye and Fall, 18’’ x 6’’ Magnetic Chuck, Coolant Unit. S/No. 64643

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.

Warco WMT 300/2 Multi-Purpose Lathe/Milling Machine, 5’’ 3-Jaw Chuck, Tailstock approx. 500mm between centres x 90mm Centre Height, Vertical Milling Unit Mounted to Headstock. S/No. 02 11 (2004)

Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.