2717 - CNC Machining Centres, Wire EDMs, Engineering Equipment previously used by Boxall & Edmiston in the Manufacture of Bespoke Shotguns
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location: These Lots are located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 11-20 von 61
Los *: Combination of Lots 4 & 4A
Combination of Lots 4 & 4A
Sodick AQ327L Premium Wire EDM with Sodick LP 33W CNC Premium Control, A.W.F, 650mm x 850mm Tank Size, Taper Cutting (U & V Axis) X = 750mm Y = 500mm Z = 400mm, Linear Motors (XYU Axis), Linear Glass Scale (XYU Axis). S/No. 1190 (2007)
Please Note: Any 3R Tool Holders or Fixtures that may be shown are not included in this lot
and
3R Tooling System
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.
Lose in dieser Kombination
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLosnummer | Beschreibung |
---|---|
4 | Sodick AQ327L Premium Wire EDM |
4A | 3R Tooling System |
Los 5: Sodick AQ35L Ram Type EDM
Sodick AQ35L Ram Type EDM with Sodick LQ1G Touch Screen Control, 4 Axis X = 355mm Y = 254mm Z = 254mm Movements, C Axis to Ram, 4 Station ATC, 400mm x 600mm Table Size, Fire Extinquisher. S/No. 2289 (2007)
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 6: Hardinge CHNCI Flatbed CNC Lathe
Hardinge CHNCI Flatbed CNC Lathe with Fanuc OT Control, 8-Station Cross Slide Turret, Collet Nose, Part off Slide, Filtermist Unit, 5000rpm Spindle, Hardinge Inbuilt Barfeed Attachment. S/No. CN-4371-T
Please Note: Any cutting tools that may be shown are not included with this lot.
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos 6A: Hardinge Tooling Collets
Hardinge Tooling Collets
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos 6B: Hardinge Tooling Collets
Hardinge Tooling Collets
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos *: Combination of Lots 6, 6A & 6B
Combination of Lots 6, 6A & 6B
Hardinge CHNCI Flatbed CNC Lathe with Fanuc OT Control, 8-Station Horizontal Turret, Collet Nose, Part Off Slide, Filtermist Unit, 5000 RPM Spindle, Hardinge Inbuilt Barfeed Attachment. S/No. CN-4371-T
and
Hardinge Tooling Collets
and
Hardinge Tooling Collets
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.
Lose in dieser Kombination
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLosnummer | Beschreibung |
---|---|
6 | Hardinge CHNCI Flatbed CNC Lathe |
6A | Hardinge Tooling Collets |
6B | Hardinge Tooling Collets |
Los 7: Datron CAT 3D-MXL High Speed Router
Datron CAT 3D-MXL High Speed Router, 1.1m x 3m Table Size, 10-Station Tool Hire, Rotary 4th Axis Unit, Broken Tool Reflection, Spindle Mounted Probe, 60,000rpm Spindle, 3D Servo System, Windows Based XP. S/No. 50840 (2003)
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Los 8: XYZ Pro 3000 CNC Turret Milling Machine
XYZ Pro 3000 CNC Turret Milling Machine with Proto Trak AGE3 3 Axis Control, 300mm x 1450mm Table, Powered Draw Bar, 70 to 3600rpm Spindle Speed, PTG 4th Axis Unit. S/No. 9497 (2001)
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available on-site, dismantling and loading will be at the cost of the purchaser.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos 8A: Qty of International Tooling
Qty of International Tooling
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.
Bitte beachten Sie, dass dieses Los auch als Kombi-Los angeboten wird
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLos *: Combination of lots 8 & 8A
Combination of lots 8 & 8A
XYZ Pro 3000 CNC Turret Milling Machine with Proto Trak AGE3 3 Axis Control, 300mm x 1450mm Table, Powered Draw Bar, 70 to 3600rpm Spindle Speed, PTG 4th Axis Unit. S/No. 9497 (2001)
and
Qty of International Tooling
Please Note: This lot is located in Shrewsbury. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser.
Lose in dieser Kombination
Der Mechanismus "Kombinationslose" bietet unseren Kunden eine einfache Möglichkeit, ein Gebot für eine Reihe verwandter Artikel abzugeben, wenn Sie es besser verstehen möchten klicke hierLosnummer | Beschreibung |
---|---|
8 | XYZ Pro 3000 CNC Turret Milling Machine |
8A | Qty of International Tooling |