2709 - Large Capacity CNC Lathes & Borers previously used in the Oil & Gas Industry

Engineering

Auction ends on

2018-10-17 15:00:00.0
Add to calendar

Time left

Bidding ended

Auction description

Please Note: These lots are located in Newbridge, Midlothian. Unfortunately there are no loading facilities on site. Dismantling and loading will be at the cost of the purchaser.

Buyers premium

Buyers Premium will be charged at 16.00%.

VAT

Value added tax will be charged at 20.00%.

Viewing times

Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com

The purchaser shall at it's own costs be responsible for disconnecting, dismantling and removing items purchased from the auction location. If the purchaser is intending to export items purchased at the auction it shall be responsible at its own cost for ensuring compliance with all UK export conditions and the obtaining of any applicable Export Licences

Please tick the box below and press confirm


* Please Note:- Any translation by using Google Translate is not guaranteed as an accurate translation and is for guide purposes only. The English lot description is the overriding description and is given the best knowledge of the auctioneer. However, the accuracy is not guaranteed and should be verified by the buyer prior to bidding.

Notice to purchasers

Final payment date

2018-10-19 17:00:00.0

Final clearance date

2018-11-01 17:00:00.0

Shipping agents

Storage contractors

Lots 1-5 of 5

Bidding will be extended on individual lots if bids are placed within 10 minutes of the item's end time.
Preview image
Ends:
17 Oct 2018 16:50:00 BST
Time left:
Bidding ended
Increment:
£1000
Bids:
69
Buyers premium:
16.00%
VAT rate:
20.00%

Lot 1: YOU-JI YV-1600 ATC CNC Vertical Lathe

YOU-JI YV-1600 ATC CNC Vertical Lathe with Fanuc 18T Control, Table Dia: 1600mm, Max Swing: 2000mm, Max Turning Dia: 1800mm, Max Under Tool: 1200mm, Table Speeds: 1-250 RPM (2003)

Please Note: This lot is located in Newbridge, Midlothian, unfortunately there are no loading facilities on site. Dismantling and loading will be at the cost of the purchaser.

Preview image
Ends:
17 Oct 2018 17:00:00 BST
Time left:
Bidding ended
Increment:
£1000
Bids:
55
Buyers premium:
16.00%
VAT rate:
20.00%

Lot 2: Hankook Protec 13ND CNC Oil Country Hollow Spindle Lathe

Hankook Protec 13ND CNC Oil Country Hollow Spindle Lathe with Fanuc 21i TB Control, Spindle Bore 330mm, Max Swing Over Bed 1300mm, Max Swing Over Cross Slide 940mm, Distance Between Centres 5000mm, Spindle Speeds 2-600 RPM, Boring Bar Clamp, (1) Boring Bar 150mm x 1500mm Boring Length, (1) Boring Bar 100mm x 800mm Boring Length, (3) Fixed Steadies, Double Chucks, 4 Way Indexing Toolpost (2009)

Please Note: This lot is located in Newbridge, Midlothian, unfortunately there are no loading facilities on site. Dismantling and loading will be at the cost of the purchaser.

Preview image
Ends:
17 Oct 2018 16:30:00 BST
Time left:
Bidding ended
Increment:
£1000
Bids:
39
Buyers premium:
16.00%
VAT rate:
20.00%

Lot 3: Takang VS35X x 2200 CNC Hollow Spindle Oil Country Lathe

Takang VS35X x 2200 CNC Hollow Spindle Oil Country Lathe with Fanuc 18T Control, Spindle Bore 320mm, Max Swing 900mm, Distance Between Centres 2200mm, 8 Station Turret, Programmable Tailstock, 3 Point Steady, Swarf Conveyor, 820mm 4 Jaw Chuck (2003)

Please Note: This lot is located in Newbridge, Midlothian, unfortunately there are no loading facilities on site. Dismantling and loading will be at the cost of the purchaser.

Preview image
Ends:
17 Oct 2018 15:30:00 BST
Time left:
Bidding ended
Increment:
£500
Bids:
33
Buyers premium:
16.00%
VAT rate:
20.00%

Lot 4: Victor V Turn 36 CNC Slant Bed Lathe

Victor V Turn 36 CNC Slant Bed Lathe, Swing Over Bed 680mm, Swing Over Cross Slide 475mm, Distance Between Centres 1250mm, Spindle Bore 105mm, Spindle Speed 9-2000rpm, Machine width 380mm, Swarf Conveyor

Please Note: This lot is located in Newbridge, Midlothian, unfortunately there are no loading facilities on site. Dismantling and loading will be at the cost of the purchaser.

Preview image
Ends:
17 Oct 2018 15:00:00 BST
Time left:
Bidding ended
Increment:
£1000
Bids:
44
Buyers premium:
16.00%
VAT rate:
20.00%

Lot 5: WMW BMT 105 CNC Horizontal Borer

WMW BMT 105 CNC Horizontal Borer with Fanuc 16i-M Control, X Travel: 2000mm (80”), Y Travel: 1600mm (64”), Z Travel: 1600mm (64”) , W Travel (Spindle): 700mm (28”), Rotary Table: 1220 x 1500 (48.8” x 60”), Full ‘B’ Axis 360,000 Positions, Spindle Dia: 105mm (4.2”) , Spindle Taper: 50INT, Spindle Speeds: 2500rpm (2002)

Please Note: This lot is located in Newbridge, Midlothian, unfortunately there are no loading facilities on site. Dismantling and loading will be at the cost of the purchaser.

Construction
Engineering
Glass
Injection Moulding
Knitting
Miscellaneous
Printing
Rotational Moulding
Sewing
Textiles
Woodworking

Categories