Kitagawa 170mm 3 Jaw Chuck

Please Note: This lot is located in Kent, unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the Purchaser.

(3) 3-Jaw Chucks; (2) 6”, (1) 4”

Please Note: This lot is located in Kent, unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the Purchaser.

8” Rotary Table with Tailstock

Please Note: This lot is located in Kent, unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the Purchaser.

6” Machine Vice

Please Note: This lot is located in Kent, unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the Purchaser.

6” Machine Vice

Please Note: This lot is located in Kent, unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the Purchaser.

6” Machine Vice

Please Note: This lot is located in Kent, unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the Purchaser.

6” Machine Vice

Please Note: This lot is located in Kent, unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the Purchaser.

6” Machine Vice

Please Note: This lot is located in Kent, unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the Purchaser.

6” Machine Vice

Please Note: This lot is located in Kent, unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the Purchaser.

6” Machine Vice

Please Note: This lot is located in Kent, unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the Purchaser.

6” Machine Vice

Please Note: This lot is located in Kent, unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the Purchaser.

6” Machine Vice

Please Note: This lot is located in Kent, unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the Purchaser.

6” Machine Vice

Please Note: This lot is located in Kent, unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the Purchaser.

6” Machine Vice

Please Note: This lot is located in Kent, unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the Purchaser.

6” Machine Vice with Small Vice

Please Note: This lot is located in Kent, unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the Purchaser.

Qty of Angle Plates, 460mm x 230mm, 400mm x 220mm, 150mm x 150mm, 200mm x 160mm Approx.

Please Note: This lot is located in Kent, unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the Purchaser.

8” Double Ended Grinder Type 8364

Please Note: This lot is located in Kent, unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the Purchaser.

Black & Decker 7” Double Ended Grinder, S/No. 410215

Please Note: This lot is located in Kent, unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the Purchaser.

NSK Electer GX Engraving Machine and HIOS CL-Tapper Model SPB-50 and Box of Hand Tools

Please Note: This lot is located in Kent, unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the Purchaser.

No. 4 Fly Press

Please note: This lot is located in Maidstone, Kent. The charge for dismantling, disconnecting, securing all axes prior to movement, internal transport and loading onto suitable transport is £20. This amount will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

(1) Bay of Racking 2.5m Length x 1.1m Wide x 4.5m High

Please Note: This lot is located in Kent, unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the Purchaser.

Dexion Racking

(2) Bays 1.23m Length x 0.61m Width x 1.98m High

(1) Fabricated Rack 0.90m Length x 0.66m Width x 2.05m High Approx

(3) Bays Dexion Racking 0.90m Length x 0.39m Width x 1.77m High

(1) 4 Drawer Filing Cabinet

(1) 3 Drawer Filing Cabinet, Bench 1.2m Length x 0.90m Width x 0.59m High

Please Note: This lot is located in Kent, unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the Purchaser.

Bench 1.78m Length x 0.65m Width 0.88m High with Back Attachment 0.83m High without Back Attachment and Senator 4” Vice

Bench 1.83m Length x 0.46m Width x 0.94m High (Excluding Granite Table)

Bench 2.23m Length x 0.35m Width x 0.98m High

Bench 1.07m Length x 0.30m Width x 0.90m High and Corner Unit with 6” Vice

Please Note: This lot is located in Kent, unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the Purchaser.

(2) Benches 2.24m Length x 0.52m Width x 1.8m High

and

(2) Benches 1.8m High x 0.52m Width x 1.8m High

Please Note: This lot is located in Kent, unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the Purchaser.

Bench 1.78m Length x 0.54m Width x 0.90m High Approx

Bench 1.12m Length x 0.45m Width x 1.2m High Approx

Bench 1.22m Length x 0.50m Width x 1.4m High Approx

Please Note: This lot is located in Kent, unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the Purchaser.

Bench 0.65m Length x 0.37m Width x 0.82m High

Bench 1.07m Length x 0.37m Width x 0.76m High

Bench 0.83m Length x 0.53m Width x 1.3m High

Corner Work Bench 1.77m Length x 1.77m Width x 1.32m High

Please Note: This lot is located in Kent, unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the Purchaser.

Bench 1.21m Length x 0.38m Width x 0.94m High

Bench 1.22m Length x 0.63m Width x 1.23m High

Bench 1.1m Length x 0.31m Width x 0.90m High

Corner Work Bench with 3” Senetor Vice 2.16m Length x 1.22m Width x 1.53m High

Please Note: This lot is located in Kent, unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the Purchaser.

(3) Fabricated Work Benches:

(1) 4.1m Length x 0.61m Width x 1.03m High

(1) 1.83m Length x 0.61m Width x 0.90m High with Steel Plate 0.46m x 0.30m and V Blocks

(1) 2.14m Length x 0.77m Width x 0.87m High (Excluding Drills)

Please Note: This lot is located in Kent, unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the Purchaser.

Bench 0.94m Length x 0.43m Width x 0.82m High

Bench 1.8m Length x 0.52m Width x 1.5m High

Bench 1.89m Length x 0.46m Width x 1.07m High

Bench 3.4m Length x 0.60m Width x 0.70m High

Please Note: This lot is located in Kent, unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the Purchaser

Racks of Steel

Please Note: This lot is located in Kent, unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the Purchaser.

(3) Cabinets; (1) including Various Sanders

Please Note: This lot is located in Kent, unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the Purchaser.

Contents of Office, Including Rack, Office Furniture (Excluding Lotted Items)

Please Note: This lot is located in Kent, unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the Purchaser.

(2) Industrial Vacuums (1) Kobe (1) Numatic

Please Note: This lot is located in Kent, unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the Purchaser.

Granite Surface Block 630mm x 410mm and (2) Height Gauges

Please Note: This lot is located in Birmingham and can be loaded free of charge to a suitable vehicle should the purchaser be able to supply front loaders, alternatively, loading of the machine will be at the cost of the purchaser. Blocking and securing will be at the cost of the purchaser.

Granite Surface Table, 800mm x 500mm x 820mm high

Please note: This lot is located in Maidstone, Kent. The charge for dismantling, disconnecting, securing all axes prior to movement, internal transport and loading onto suitable transport is £75. This amount will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Sylvac Z Cal 350 Digital Height Gauge

Please Note: This lot is located in Kent, unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the Purchaser.

Jungheinrich Model ERC-A 12, 5G 100-480 T Electrical Pedestrian Pallet Truck, Max Capacity 1250kg. S/No. 7 2704 04 02 (1984) 

Please note: This lot is located in Maidstone, Kent. The charge for dismantling, disconnecting, securing all axes prior to movement, internal transport and loading onto suitable transport is £125. This amount will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Total Lifter Pallet Truck S/No. 14112852M-5/121 (2014) Capacity 2500kg

Please Note: This lot is located in Kent, unfortunately, there are no loading facilities available on site. Dismantling and loading will be at the cost of the Purchaser.

Hydrovane Compressor S/No. 2HV371514/9 with Tank

Please note: This lot is located in Maidstone, Kent. The charge for dismantling, disconnecting, securing all axes prior to movement, internal transport and loading onto suitable transport is £75. This amount will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Hydrovane HV11RS Compressor with CompAir F26M Dryer, Tank and CompAir FT Unit (2010) 

Please note: This lot is located in Maidstone, Kent. The charge for dismantling, disconnecting, securing all axes prior to movement, internal transport and loading onto suitable transport is £250. This amount will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.