2676 – CNC Lathes, Machining Centres, Milling Machines and Other Associated Equipment
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location: These Lots are located in Burntwood, Tamworth & Birmingham. Please see individual lots for loading information.
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 von 10
Los 1: Colchester Multi-Turn 2000 CNC Lathe with Fanuc OiTC Control
Colchester Multi-Turn 2000 CNC Lathe with Fanuc OiTC Control with Manual i Guide, 400mm x 1156mm Gap Bed Capacity, 250mm 3 Jaw Chuck, 8 Station Turret, 55m Spindle Bore, 2500 RPM, 246mm Swing Over Cross Slide (2009)
Please Note: This lot is located in Burntwood and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Los 2: Doosan S310 CNC Lathe with Fanuc 21t Control
Doosan S310 CNC Lathe with Fanuc 21t Control, Distance Between Centres 450mm, 12 Station Turret, Swing Over Bed 500mm, Hole Dia. 77mm, X Travel 200mm, Y Travel 450mm, Tooling and Manuals. S/No. 1139 (2001)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Los 3: XYZ Mini Turn 190 CNC Lathe with Siemens 810D Powerline
XYZ Mini Turn 190 CNC Lathe with Siemens 810D Powerline, 200mm 3 Jaw Power Chuck, 500mm Between Centres, 8 Station Turret, Tool Eye, Tooling, Parts Catcher, Swarf Conveyor, Swarf Bin. S/No. CMK1576 (2007)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Los 4: XYZ 410 Proturn CNC Lathe with Prototrak LX3 Control
XYZ 410 Proturn CNC Lathe with Prototrak LX3 Control, 3 Point Steady, 3 Jaw Chuck, Quick Change Tool Post plus Holders. S/No. 330 (1998)
Please Note: This lot is located in Burntwood and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Los 5: XYZ Vulcan CNC Lathe with Siemens 810D Shop Turn Control
XYZ Vulcan CNC Lathe with Siemens 810D Shop Turn Control, 250mm 3 Jaw Power Chuck, 700mm Between Centres, X Travel 220mm, Y Travel 650mm, 12 Station Turret, Parts Catcher, Tool Eye, Tooling, Swarf Conveyor, Swarf Bin. S/No. 0202070 (2002)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Los 5A: Haas TL1 – 1CE CNC Lathe
Haas TL1 – 1CE CNC Lathe with Haas Control, 210mm 3 Jaw Chuck, Quick Change Tooling with 6 Tools, Tailstock. S/No. 70136 (5/05)
Please Note: This lot is located in Gosport, Hampshire. This lot is located within the building’s first floor and can only be removed by the appointed contractor. The charge for dismantling, internal transporting and lowering to ground level onto a suitable vehicle is £1300. This amount will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.
Los 7: Cincinnati Hawk 150 CNC Lathe with Multifeed ML1 Short Magazine Bar Feed
Cincinnati Hawk 150 CNC Lathe with Multifeed ML1 Short Magazine Bar Feed with Acramatic 2100 Control, Collet Chuck, Distance Between Centres 400 mm, X Travel 215 mm, Z Travel 440 mm, 12 Station Turret, Parts Catcher. S/No. 7051A00RA0309 (1998)
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Los 46: Colchester Mascot 1600 Gap Bed Lathe
Colchester Mascot 1600 Gap Bed Lathe, 17” x 60” Gap Bed Capacity, 3 Jaw Chuck, Anilam Mini Wizard 2 Axis DRO, Quick Change Toolpost Plus Holders, 3” Spindle Bore, 28” Swing In Gap. S/No. 01420
Please Note: This lot is located in Tamworth and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Los 57: Harrison M300 Lathe
Harrison M300 Lathe, 160mm 3 Jaw Chuck, Distance between Centres 650mm, Mini Wizard Dro, Multifix Quick Change Tooling. S/No. 310384
Please Note: This lot is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.
Los 67: Colchester Bantam 1600 Lathe
Colchester Bantam 1600 Lathe, 5” 3 Jaw Chuck, 500mm Distance Between Centres, 8” 4 Jaw Chuck, Quick Change Tooling, Mitutoyo Dro. S/No. 2/0050/02937
Please Note: This lot is located in Gosport, Hampshire. This lot is located within the building’s first floor and can only be removed by the appointed contractor. The charge for dismantling, internal transporting and lowering to ground level onto a suitable vehicle is £200. This amount will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.