Haas SL-40THE CNC Lathe with Haas Control, 10 Station Tool Changer, VDI 40 Tooling, Tail Stock, 15” 3-Jaw Chuck. S/No. 3078375 (08/07)

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

Haas VF-2DCE Machining Centre with Haas Control, Table size 3ft x 14”, 20 Station Tool Changer, BT 40 Tooling, Chip Screw, 6” Vice. S/No. 1062304 (10/07)

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

Webster Bennett Type ‘R’ 72” Elevating Rail Vertical Borer, Maximum Swing 84”, Chuck Diameter 72”, Speeds 5.2 to 117 rpm, Mimic Dynatrace Copying, Two sets of Jaws and Boring Bars S/No. 7142-4 (1982)

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

Veb STSR400 Slotter, Table size 32”. S/No. 4120.11.59

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser

Ormerod Slotter, Table size 20” 8” Stoke

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

Bridgeport Turret Mill, Newhall Dro, Table size 42” x 9”. S/No. 1596/BRJ/MILL

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

Jones and Shipman 311 Tool and Cutter Grinder. S/No. 64213

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

Edgwick Surface Grinder 18” x 6” Magnetic Chuck

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

Colchester Triumph 2000 Lathe, distance between Centres 1300mm, 250mm 3-Jaw Chuck, Gap Bed, 300mm Swing, 300mm 4-Jaw Chuck, 2-point Steady, 3-point Steady. S/No. 6/0004/10797X

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

Clarkson Tools and Cutter Grinder. S/No. 1304

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

10” Double Ended Grinder

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

Horizontal Hacksaw. S/No. BFC201376/159

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser

Mills Press, Max Pressure 2240lbs, Extended Throat size 2ft. S/No. P54229

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

Asquith ODI 6ft Radial Drill, Box Table 1.3m x 900mm x 500mm high, S/No. ODI 8849 Excluding Vice

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

Myford Super 7 Lathe

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

Pearson 8 x .5 Hydraulic Guillotine, 2.5m Bed Length. S/No. 4064.1

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

Steco 6ft Pyramid Rolls

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

Startrite HB330M Horizontal Band Saw with Roller Conveyor System. S/No. 154461 (1997)

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

19 Carmac 200C MIG Welder

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

Newarc RM403 TIG Welder. S/No. EN60974-1

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

Wega 400 MIG Welder. S/No. 71621

Please Note: In need of repair

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

Wega 400 MIG Welder. S/No. 74446

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

Newarc TIG Welder. S/No. P1600

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

Murex Transmig 350 MK2 MIG Welder. S/No. 1198213

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

18 Ton Solid Slotted Table 8ft x 15ft x 3ft high, Table depth 12”

Slotted Table 10ft 10” x 6ft x 35” high (Excluding Contents)

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

Slotted Table 10ft x 8ft x 34” high (Excluding Contents)

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

Fabrication Bench 2m x 4m x 34” high (Excluding Contents & Excluding Compressor)

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

Fabrication Bench 6ft x 13ft 6” x 34” high (Excluding Contents)

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

Steel Rack, (3) Stands, 6ft 3” high, 32” width (Excluding Steel)

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

THIS HAS BEEN SCRAPPED - NOT AN AFTERSALE 

Steel Rack, (3) Stands, 6ft 3” high, 32” width (Excluding Steel)

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

THIS HAS BEEN SCRAPPED - NOT AN AFTERSALE

Steel Rack, (3) Stands, 6ft 3” high, 32” width (Excluding Steel)

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

THIS HAS BEEN SCRAPPED - NOT AN AFTERSALE

Startrite Sabre Vertical Bandsaw, Throat size 20", Table size 23" x 23". S/No. 09069

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

Hedenair Model ML HED350 Pedestal Furnace, Rating 12KW, Door size 35" x 35" x 35" Depth. S/No. S9890304 

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

Guyson Super 2 Shot Blast Machine with collection Unit, Door size 15" x 9". S/No. T2X1792

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

Brydon Mk3 Tubular Rivet Clincher. S/No. 0/7/935

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

RJH Horizontal Bandfacer fitted to Dust Extraction Unit. S/No. 13701

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

Bench Drill On Stand

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

Union Heavy Duty 12" Double Ended Grinder

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

Wicksteed Horizontal Bandsaw

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

Meddings Bench Drill

Please Note: This lot is located in Newcastle upon Tyne. Unfortunately, there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.