Dalian 600 Group 560 X 2000 Gap Bed Centre Lathe, 560mm X 2000mm Gap Bed Capacity, 3 & 4 Jaw Chucks, 2 & 3 Point Steadies, 105mm Spindle Bore, Quick Change Tool Post Plus Holders, Newall B60, 2 Axis Digital Read Out, Rapid Feeds to Saddle, 26 - 1700 Rpm, S/No. F2406

Please Note: This Lot is Located in Tamworth and will be loaded free of charge to a Suitable Vehicle. Blocking and Securing will be at the cost of the purchaser.

Colchester Student 1800 Lathe 13" X 25" Capacity,3 Jaw Chuck, Chuck Guard, Quick Change Tool Post Plus Holders, Dual Imperial & Metric Dials, S/No, 05603,

Please Note: This Lot is Located in Burntwood and will be loaded free of charge to a Suitable Vehicle. Blocking and Securing will be at the cost of the purchaser.

XYZ 1600 Lathe 420mm X 1000mm Gap Bed Capacity, 3 & 4 Jaw Chucks, Chuck Guard, Quick Change Tool Post Plus Holders, 3 Point Steady, Newall Topaz 2 Axis Digital Read Out, Dual Imperial & Metric Dials, 5 HP, 610mm Swing in Gap, 50mm Spindle Bore, 50 - 2240rpm, S/No. 2, 0105/9/97 (1997)

Please Note: This Lot Is Located in Burntwood and will be loaded free of charge to a Suitable Vehicle. Blocking and Securing will be at the cost of the purchaser.

Lodge & Shipley Facing Lathe T60, Maximum Swing 60”, Anilam Micro Wizard 2 Axis Digital Read Out, 37" Face Plate, 3 - 338rpm with Tool Post Grinding Attachment

Please Note: This Lot is Located in Tamworth and will be loaded free of charge to a Suitable Vehicle. Blocking and Securing will be at the cost of the purchaser.

Herbert 9C-30 Turret Lathe, 30" Swing Over Bed, 21" Swing Over Cross Slide, 4 1/4" Spindle Bore, 6 Position Turret, Heidenhain Digital Read Out

Please Note: This Lot is Located in Tamworth and will be loaded free of charge to a Suitable Vehicle. Blocking and Securing will be at the cost of the purchaser.

Ward 7 Combination Turret Lathe, Turret Tooling. S/No. 1AJI36

Please Note: This Lot is Located in Burntwood unfortunately there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

Tarnow TUJ Lathe 50 x 2000, 3 & 4 Jaw Chucks, 3 Point Steady S/No, 1275

Please Note: This Lot is Located in Tamworth and will be loaded free of charge to a Suitable Vehicle. Blocking and Securing will be at the cost of the purchaser.

DSG Type 17 Lathe 17 X 72 Gap Bed, 4 Way Tool Post, Taper Turning, 2 Point Steady, Drilling Attachment, S/No. 3280127/59

Please Note: This Lot is Located in Tamworth and will be loaded free of charge to a Suitable Vehicle. Blocking and Securing will be at the cost of the purchaser.

Smart & Brown 1024 Lathe, 3 & 4 Jaw Chucks, Chuck Guard, Face Plate, Catch Plate, 5c Collets, Change Gears, Travelling Guard, S/No, S11208,

Please Note: This Lot is Located in Burntwood and will be loaded free of charge to a Suitable Vehicle. Blocking and Securing will be at the cost of the purchaser.

Colchester Bantam Lathe, 4 Way Tool Post, Spindle Speeds 36 – 1600 Rpm, 6” 3 Jaw Chuck, 10” Face Plate, Catch Plate

Please Note: This Lot is Located in Tamworth and will be loaded free of charge to a Suitable Vehicle. Blocking and Securing will be at the cost of the purchaser.

XYZ DPM 4000 Bed Mill 58" X 14" Table, 40 Int, Variable Speed Head, Proto Trak MX 2 Control 5 HP, Spindle Motor Longitudinal Travel: 40" Cross Travel: 20" Vertical Travel: 23". S/No, 7974 (1996)

Please Note: This Lot is Located in Burntwood unfortunately there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

XYZ KRV Pro 2000 Milling Machine, 50" X 10" Table, Variable Speed Head with Tooling Selection, Prototrak MX 2 Control, Power Draw Bar,3 HP, Spindle Motor, Longitudinal Travel: 30" Cross Travel: 16" Knee Vertical Travel: 16" (1996)

Please Note: This Lot is Located in Burntwood and will be loaded free of charge to a Suitable Vehicle. Blocking and Securing will be at the cost of the purchaser.

XYZ KRV Pro 3000 Milling Machine 54" X 12" Table, 40 Int, Variable Speed Head, Prototrak MX 2 Control 5 HP, Spindle Motor Longitudinal Travel: 32" Cross Travel: 17", Knee Vertical Travel: 16" (1994)

Please Note: This Lot is Located in Burntwood and will be loaded free of charge to a Suitable Vehicle. Blocking and Securing will be at the cost of the purchaser

Parkson Universal Milling Machine, 3N, Motorised Over Arm 60" X 14" Swivel Table, 50 Int, Taper Horizontal Spindle & Support, 50 Int, Taper Double Swivel Vertical Head, Hand Feeds to Quill, Power Feeds and Rapids all Directions, Dual Imperial & Metric Dials, Horizontal Spindle Speeds: 51 – 1330rpm, Vertical Head Spindle Speeds: 44 - 1800 Rpm, S/No, 76185

Please Note: This Lot is Located in Burntwood and will be loaded free of charge to a Suitable Vehicle. Blocking and Securing will be at the cost of the purchaser.

XYZ KRV 3000 Turret Miller, 48" X 12" Table, 5 Hp Variable Speed Head, 40 Int, Taper Spindle, Variable Feeds and Rapids Longitudinal, 2 Axis Accu Rite Mill Mate Digital Read Out, Metric Dials. S/No. 6224 (1990)

Please Note: This Lot is Located in Burntwood and will be loaded free of charge to a Suitable Vehicle. Blocking and Securing will be at the cost of the purchaser.

Cincinnati Universal Milling Machine 207 Mk, 59 1/2" (1510mm) X 13 3/4" (350mm) Swivel Table, 50 Int, Taper Horizontal Spindle & Support, 50 Int, Taper Swivel Vertical Head, Power Feeds and Rapids All Directions, Hand Feed to Horizontal Spindle, Newall DP7, 3 Axis Digital Read Out, Dual Imperial & Metric Dials, Longitudinal Traverse = 30" (762mm), Cross Travers = 10 1/2" (265mm), Vertical Traverse = 17" (430mm), S/No, 13J23U1ABE-27,

Please Note: This Lot is Located in Burntwood and will be loaded free of charge to a Suitable Vehicle. Blocking and Securing will be at the cost of the purchaser.

Adtek Turret Miller Extractor, 50" X 10" Table, 3 Hp, Variable Speed Head, R8 Taper, Variable Feeds & Rapids Longitudinal, Anilam Spirit 11, 2 Axis Digital Read Out, Metric Dials, Chrome Slides. S/No, 21356,

Please Note: This Lot is Located Burntwood and will be loaded free of charge to a Suitable Vehicle. Blocking and Securing will be at the cost of the purchaser.

Kearney & Tecker 307 S-12 Vertical Miller, Table Size 62” X 12”, Spindle Speeds 25 – 2000 Rpm, Spindle Taper 50 Int. S/No. OP52405

Please Note: This Lot is Located in Tamworth and will be loaded free of charge to a Suitable Vehicle. Blocking and Securing will be at the cost of the purchaser.

Bowes BR40 X 1250/14ft Radial Arm Drill, 5 Morse Taper, Box Table 36" X 24" X 20" High, Insta Lock Safety Spindle Brake, Variable Speeds 13 - 1200rpm, S/No, 10/8511/014

Please Note: This Lot is Located in Burntwood unfortunately there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

Pollard 2NY Radial Arm Drill, 2 Morse Taper, Rise & Fall Table 36" X 21", Insta Lock Safety Spindle Brake, Speeds 293 - 2240rpm, S/No, 27805C,

Please Note: This Lot is Located in Burntwood and will be loaded free of charge to a Suitable Vehicle. Blocking and Securing will be at the cost of the purchaser.

Asquith Od1 4ft 6" Radial Arm Drill, Plus Ancillary High Speed Spindle.

Please Note: This Lot is Located in Burntwood unfortunately there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.

Lang Electro Feed Drill, 17” X 80” Capacity, Spindle Speeds 30 – 1639 Rpm, 4 Way Tool Post, 3 & 4 Jaw Chucks, 3 Point Steady, S/No, 69c10

Please Note: This Lot is Located in Tamworth and will be loaded free of charge to a Suitable Vehicle. Blocking and Securing will be at the cost of the purchaser.

Asquith Heavy Duty Drilling Machine, 5 Morse Taper, Power Feeds to Spindle, Insta Brake Safety Spindle Brake, 31 – 830rpm, 20" X 16" T Slotted Table, Rise and Fall Table, S/No, S/7192,

Please Note: This Lot is Located in Tamworth and will be loaded free of charge to a Suitable Vehicle. Blocking and Securing will be at the cost of the purchaser.

WMW Sabo Standard 40 Heavy Duty Drill 4 Morse Taper, Power Feeds to Spindle, 63 - 1000 Rpm, Rise and Fall Head, Rise and Fall Table

Please Note: This Lot is Located in Tamworth and will be loaded free of charge to a Suitable Vehicle. Blocking and Securing will be at the cost of the purchaser.

Pollard 15 LY 6 Spindle Drill, 3 Morse Taper Spindles, 2 X Power Feeds, 68" X 15 1/2" T Slotted Rise and Fall Table, Spindle Speeds: 86 - 1920 Rpm, S/No. 23496B

Please Note: This Lot is Located in Burntwood unfortunately there are no loading facilities available. Dismantling and loading will be at the cost of the purchaser.