Please click here to view a Brochure for this Auction

Precitech  Nanoform 250 Ultra Precision Diamond Turning Lathe with Precitech UPX CNC Control System, work Piece Balancing Software, Maximum Speed of Air Bearing Work Spindle 18000rpm, Fitted with 200mm Vacuum Chuck, Maximum Load on Spindle 27kg, Axis Travels X=220mm, Z=220mm, Maximum Feed Rate 4000mm/Min Maximum Swing 250mm, Tool Platten Dimensions 600mm x 370mm, Granite Base Construction, Vibration Isolation System, Oil Hydrostatic Machine Slides, Spray Mist Lubrication System, Fume Extraction Unit, Vacuum Unit. S/No. 2009-023 (2011)

Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Studer S31 External Universal CNC Grinder with Ge Fanuc 21i TB Control System, Maximum Permissible Wheel Speed 50m/S, Maximum Wheel Diameter 400mm, X Axis Travel 285mm, Z Axis Travel 1150mm C&W 360 Degrees A=210 Degrees, Maximum Turning Diameter 250mm, Centre Height 175mm, Equipped with Coolant Filtration Unit, Coolant Temperature Control, Losma Fume Extraction Unit, Movomatic ES600 Gauging Unit, Dittel M5000 Balancing Unit. S/No. 030.0427 (2006) Series /07

Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Studer S33 External Universal CNC Grinder with Ge Fanuc 21i TB Control System, Maximum Permissible Wheel Speed 50m/S, Maximum Wheel Diameter 500mm, X Axis Travel 580mm, Z Axis Travel 805mm, Rapid Feed Rates X 5m/min, Z 10m/min, Centre Height 175mm, Maximum Turning Diameter 250mm with Coolant Filtration, Losma Fume Extraction Unit. S/No. 27.0139 (2004)

Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Studer S33 External Universal CNC Grinder with Ge Fanuc 21i Tb Control System, Maximum Permissible Wheel Speed 50m/S, Maximum Wheel Diameter 500mm, X Axis Travel 580mm, Z Axis Travel 805mm, Rapid Feed Rates X 5m/min, Z 10m/min, Centre Height 175mm, Maximum Turning Diameter 250mm with Coolant Filtration, Losma Fume Extraction Unit, Novomatic ES124 Gauging Unit (Senstronic 2). S/No. 27.0137 (2004)

Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Studer S21 Lean CNC Grinding Machine with Ge Fanuc 21i Control System C Axis Control to Grind Out of Round Shapes (Squares, Oval etc and Thread Grinding Feature) Maximum Pheriperal Spindle rpm 50m/s, Maximum Internal Grinding Spindle rpm (tbc) Maximum Axis Travels X=254mm Z=483mm Wheel Head = 210 Degrees (-15/+195), Maximum Work Piece Speed 1000rpm, CNC Controlled 1 Degree Twin Wheel Universal Swivelling Head, Distance between Centres 400mm, Maximum Grinding Wheel Diameter 400mm, Maximum Work Piece Load 30kg.  Auto Wheel Balancing Unit, Movomatic Gauging Unit. S/No.028.0011 A0.002

Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Studer S36 External Universal CNC Grinder with Ge Fanuc 16t Control System, Maximum Permissible Wheel Speed 45m/S, Maximum Wheel Diameter 500mm, X Axis Travel 260mm, Z Axis Travel 650mm, Distance Between Centres 1000mm, Centre Height 175mm, Maximum Turning Diameter 250mm with Coolant Filtration, Fume Extraction Unit. S/No. 020.0688.90.084 (1999)

Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Studer S20 Universal Manual Cylindrical Grinder Series 170, Maximum Spindle Speed 35m/S, Centre Height 100mm, Distance between Centres 650mm, Work Head Angle Manual Adjustment 15 Degrees, Table Angle Manual Adjustment 15 Degrees, Sony Dro, Coolant Filtration, Internal Attachment Facility (Note No Internal Attachments). S/No. 015-2011 (2004)

Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Blohm Precimat 306 CNC Surface Grinder, Blohm CNC Control System, Maximum Permissible Wheel Speed 50m/S, Axis Travels: X Axis Travel 700mm, Y Axis Travel 450mm, Z Axis Travel 450mm, Table Size 1000mm X 300mm, Wagner Magnetic Surface Chuck Dimensions 600mm x 300mm with Coolant Filtration Unit. S/No. 15274 (2004)

Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Myford MG 12 CNC Cylindrical Grinder with Ge Fanuc 21i T Control System, Workhead Maximum Spindle Speed 2500rpm, Work Wheel Speed 50-900rpm, Maximum Wheel Diameter 300mm, Table Travel 350mm, Rapid Feed Rates 5m/min, Workhead Travel 100mm, Distance Between Centres 250mm, Centre Height 60mm, Coolant Filtration. S/No. CNC 170750 (2001)

Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Myford MG12 CNC Cylindrical Grinder Ge Fanuc 21i T Control System, Workhead Maximum Spindle Speed 2500rpm, Work Wheel Speed 50-900rpm, Maximum Wheel Diameter 300mm, Table Travel 350mm, Rapid Feed Rates 5m/min, Workhead Travel 100mm, Distance between Centres 250mm, Centre Height 60mm, Fitted with Marposs MP5 Gauging, Coolant Filtration. S/No. CNC170743 (2000)

Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Andmar BG Internal Grinder, Jones and Shipman 1074 Grinder Modified by Andmar to Toolmakers Specification. S/No. A1872

Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Andmar Bg Internal Grinder, Jones and Shipman 1074 Grinder Modified by Andmar to Toolmakers Specification. S/No. A1717

Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Myford MG 12 Cylindrical Grinder Type MG12 Series M, Spindle Speed 1830-1988 Rpm, Maximum Wheel Diameter 12”, Table Size 5” X 12”

Traub TNX 65/42 CNC 12-Axis Turning Centre with Traub TX8i-S Control System, Maximum Main and Sub Spindle Speeds 4000rpm, Maximum Bar Capacity 65mm, Milling Speed Maximum 6000rpm (12000rpm with Geared Driven Tools), Axis Travels X1 X2 X3 = 175mm, Y1 Y2 Y3 = 80mm (+/- 40mm), Z1 Z2 Z3 = 650mm, Sub Spindle Travel 700mm, Main C Axis 360 Degrees (0.001) Sub C Axis 360 Degrees (0.001) Triple 10 Station Turrets (All Positions Can Be Driven), LNS Mover S2 Barfeed, S/No. 211137-2010, Maximum Bar Length 2000mm, Spindle Liners, Tool Presetter, Parts Conveyor, Swarf Conveyor, Twin Hainbuch Quick Change Collet Chucks, OMF1000 Fume Extraction, Coolant Filtration, Hydrafeed Rota Pack. S/No. 7060172 (2008)

Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Mazak Nexus 250MS 5 Axis CNC Turning Centre with Mazatrol Matrix Control System, Maximum Main Spindle Speed 3800rpm, Sub Spindle Maximum 6000rpm, Milling Speed 4500rpm, Axis Travels X=230mm Z=575mm W=585mm (Sub Spindle), C Axis Main 360 Degrees (0.001) C Axis Sub 360 Degrees (0.001) Maximum Spindle Bore 75mm, 12 Station Turret of which All Can Be Driven, Tool Presetter, Twin Parts Catcher, Multifeed MB1B Barfeed, Main Spindle Kitagawa BB210 3 Jaw Chuck, Sub Spindle Kitagawa B206 3 Jaw Chuck, OMF100 Fume Extraction Unit, Hydrafeed Rota Pack. S/No. 197253 (2007)

Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Mazak Nexus QT10 2 Axis CNC Lathe with Mazatrol T Plus Control System, Maximum Spindle Speed 6000rpm, Axis Travels X=100mm, Z=290mm, Distance between Centres 500mm, 8 Station Turret, Fitted with Kitagawa B206 Chuck, Tail Stock, Tool Presetter, Parts Catcher, OMF 1000 Filter Unit. S/No. 131927 (1998)

Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Harrison Alpha 1350s 2 Axis CNC Lathe with Harrison Ge Fanuc Alpha 1000 Series Control System, Touch Screen, Maximum Spindle Speed 3250rpm, Axis Travels X=230mm, Z=500mm, Rapid Feed Rates X=3m/min Z=6m/min, Distance between Centres 760mm, Fitted with 160mm Pratt 3 Jaw Chuck, Manual Tailstock, 4 Position Manual Tool Post. S/No. S9D107 (2004)

Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

HAAS VFO Vertical CNC Mill with HAAS CNC Control, Maximum Spindle Speed 7500rpm, BT40 Spindle Taper, Axis Travels X=510mm, Y=410mm, Z=410mm (510mm For Tool Change), Table Dimensions 660mm x 350mm, 20 Station Atc, Renishaw TS27R Tool Presetter, Programable Coolant Nozzels, Swarf Screw, HAAS Twin 4th Axis (Note: See Photos), Renishaw Probe Interface. S/No. 12497 (11/1997)

 Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

HAAS VFO Vertical CNC Mill with HAAS CNC Control, Maximum Spindle Speed 7500rpm, BT40 Spindle Taper, Axis Travels X=510mm Y=410mm Z=410mm (510mm For Tool Change), Table Dimensions 660mm x 350mm, 20 Station Atc, Renishaw TS27R Tool Presetter, Programable Coolant Nozzels, Swarf Screw, HAAS 4th Axis Fitted with 160mm Manual Chuck and Tail Stock, Renishaw Probe Interface. S/No. 9699 (03/1997)

Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Tos Kurim FNK 25A Manual Turret Mill, Table Dimensions 50” x 11” Fitted with Heidenhain Dro. S/No. 16291 (1992)

Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Colchester Triumph 2500 Colchester Triumph 2500 Manual 2 Axis Lathe, Distance Between Centres 46”, fitted with 8” Manual 3 Jaw Chuck, Heidenhain Dro. S/No. LV150GMRAJ06026

Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Sunnen MBB-1660 Manual Honing Machine, Honing Bore Capacity 1.5mm to 165mm, Honing Length 3mm to 400mm, (Note: Bore Inspection Equipment Shown In Photo On Machine Not Included). S/No. SB1-96064

Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Sunnen MBB-1660 Manual Honing Machine, Honing Bore Capacity 1.5mm to 165mm, Honing Length 3mm to 400mm (Note: Bore Inspection Equipment Shown In Photo On Machine Not Included). S/No. 2AL-95867

Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Jones & Shipman 1600 Centre Lapping Machine, Distance between Centres 1000mm, fitted with Dresser. S/No. B014623

Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Trumpf Laser Etch Trumark Station 5000, Truetop Marks Marking Software, Integrated Cad Editor, Table Dimensions 600mm x 380mm, Axis Travels X=300mm, Y=300mm, Z=500mm, Maximum Work Piece Dimensions W=680mm, H=500mm, D=700mm, Integrated Exhaust System. S/No. E1052A0202 (2010)

Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Jones & Shipman Dominator 624 CNC Surface Grinder with GE Fanuc Series 210i-M CNC Control, Table 600 mm x 200 mm, Equipped with 4th Axis, Coolant/Filtration System. S/No. M20583 (Installed 2002)

Please Note: This Item is lying in Birmingham and not part of the Air Bearings Assets, these are available due to a spurious bidder in a previous auction.

Charmilles Robofil 440CC Submerged 5 Axis CNC Wire EDM with Auto Wire Thread, Charmilles Millennium Control, 30° Taper cut, Charmilles Clean Cut Generator, Submerged Cutting to 400mm, Auto wire thread, Wire capacity 0.1 - 0.33mm, Hand box control, Axis Travel : X = 550mm, Y = 350mm, Z = 400mm, Maximum work piece dimensions: X = 1200mm, Y = 700mm, Z = 400mm, 4-Side clamping frame, Large reel option fitted for extended running time. S/No. 931608 (2006)

Please Note: This Item is located in Birmingham. This lot can only be loaded to a suitable vehicle by our authorised transport. The loading fee for this item will be £250

Please Note: This Item is lying in Birmingham and not part of the Air Bearings Assets, these are available due to a spurious bidder in a previous auction.

Tooling suitable for Mazak Quick Turn Nexus 250

Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Tooling suitable for Mazak Quick Turn Nexus 250

Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Tooling suitable for Mazak Quick Turn Nexus 250

Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Tooling suitable for Mazak Quick Turn Nexus 250

Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Tooling suitable for Mazak Quick Turn Nexus 250

Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Tooling suitable for Mazak Quick Turn Nexus 250

Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Tooling suitable for Mazak Quick Turn Nexus 250

Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Tooling suitable for Mazak Quick Turn Nexus 250

Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Tooling suitable for Mazak Quick Turn Nexus 250

Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Tooling suitable for Mazak Quick Turn Nexus 250

Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Tooling suitable for Mazak Quick Turn Nexus 250

Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Tooling suitable for Mazak Quick Turn Nexus 250

Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Tooling suitable for Mazak Quick Turn Nexus 250

Please Note: This lot is located in Poole, Dorset. Unfortunately, there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.