Butler HiPower HD30 Elgamill 3-Axis CNC Bed Type Milling & Boring Machine with Heidenhain Model 410 Control, BT50 Spindle Taper, Bed Area 8000 mm x 1200 mm, Longitudinal Traverse 6150 mm, Vertical Traverse 1650 mm, Cross Traverse 860 mm with Universal Milling Head. S/No. 27733B.

Please Note: This machine is located in Nottingham. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Devlieg 43H72 DC Spiromatic Jig Mill Horizontal Boring & Milling Machine, Spindle Diameter 4” ISO 50 Taper, Table Area 72” x 35”, Longitudinal Traverse 72”, Vertical Traverse 60”, Cross Traverse 43” with Phillips 3-Axis Control. S/No. 2-14490 DC

Please Note: This machine is located in Nottingham. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Union 110/6 Horizontal CNC Boring Machine with Heidenhain 360 3 Axis Control (Retrofitted), Spindle Diameter 110 mm, ISO 50 Taper, Table Size 2000 mm x 1600 mm, Longitudinal Traverse 2000 mm, Vertical Traverse 1600 mm, Cross Traverse 200 mm Including Table Indexing (B Axis). S/No. 11339

Please Note: This machine is located in Nottingham. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Amada Promecam ITPS100 Ton x 3050 mm Over Bed, Upstroke Hydraulic CNC Press Brake with EMA 3 Axis Control (X,R,Y), Sick Machine Mounted Operator Guards, Side and Rear Fences, Foot Pedal Control. S/No. ITPS 100 30 P01111. New Encoder Required for ‘R’ Axis.

Please Note: This lot is located in Chesterfield and will be loaded free of charge to a suitable vehicle. Dismantling & Loading will be at the cost of the purchaser.

Trumpf Trumatic 120 Rotation Compact CNC Sheet Metal Working Machine for Punching, Profiling and Forming, Cutting Force 150kn, Max Sheet Thickness 4.5mm, Max Punching Diameter 38mm, Working Range 1000 x 1000mm without Repositioning, 1000 x 2000mm with One Repositioning, Trumpf CNC Trumagraph CC 220 Control with Tooling and Toolholders (as Shown), Photo Cell Operator Guards. S/No.330262A

Please Note: This lot is located in Chesterfield and will be loaded free of charge to a suitable vehicle. Dismantling & Loading will be at the cost of the purchaser.

EP Hrbm50HV 3 Roll Section Bending Machine (Unused), Hydraulic adj to Top Roll, Shaft Diameter 50mm, 2.2kw Motor with Combination Rolls, Flats on Flat 100 x 15mm, Flats on Edge 60 x 10mm, Angles 60 x 60 x 5mm, Box Section 60 x 60 x 3mm, Separate Foot Pedal Control.

Please Note: This lot is located in Chesterfield and will be loaded free of charge to a suitable vehicle. Dismantling & Loading will be at the cost of the purchaser.

AJAX AJ40 40mm Capacity Geared Head Drilling Machine, No. 4MT Spindle, Spindle Speeds 56-1000 Rpm, Universal Tee Slotted Table 400mm X 400mm with DC Injection Brake.

Please Note: This lot is located in Chesterfield and will be loaded free of charge to a suitable vehicle. Dismantling & Loading will be at the cost of the purchaser.

EPASY 1250mm x 6mm Asymmetric Initial Pinch Plate Bending Rolls, Roll Dia 150mm, Power Adjustment to Back Bending Roll, Digital Readout for Back Roll Position, Manual Adjustment to Pinch Roll, Top Roll to Slip, Induction Hardened Rolls, Brake Motor, Foot Pedal Control, Emergency Stop Button on consul and Emergency Trip Wires, Motor 2.2KW

Please Note: This lot is located in Liverpool and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.

EP RBM10HV Section Bending Machine, Horizontal and Vertical Operation, Manual Adjustment to Top Roll. Shaft Dia 30mm, Foot Pedal Control with Emergency Stop Button Capacity- Flat on Flat 50x10mm min, Dia 400mm and 20 x 5mm Min Dia 160mm.

Please Note: This lot is located in Liverpool and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.

Keetona 80” X 3/16” Hydraform Universal Bending and Folding Machine, Full Length Segmented Tooling and Qty of Swan-Neck Tooling. S/No. HUF6316031

Please Note: This lot is located in Liverpool and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.

EPTR 1320mm x 1.5mm Mild Steel Capacity Treadle Operated Guillotine with Front Support Arms, Squaring Guide on Bed, Manual Rear Back Gauge.

Please Note: This lot is located in Liverpool and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.

Model EP KHS 1000mm x 1mm Hand Operated Knife Type Guillotine Shear (Guarded) with front manually operated gauging rail, Table Height 750mm.

Please Note: This lot is located in Liverpool and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.

CH 300 SA Double Column Automatic Horizontal Mitre Cutting Bandsaw, Rounds at 90 Degrees 300mm, Rectangles at 90 Degrees 350 X 300 mm, Capacities at 45 Degrees 260 Photosmm Rounds, 260 X 350mm Rectangles, Hydraulic Vice and Adjustment to Cutting Angle, Coolant. (2011)

Please Note: This lot is located in Chesterfield and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.

EP NOTCH 80mm X 80mm X 1.5mm, Treadle Operated Corner Notching Machine with Bed Guides, Foot Pedal Control.

Please Note: This lot is located in Liverpool and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.

EP Notch 200 x 200 x 6mm Hydraulic Fixed Angle Notching Machine with Bed Rule and Guides.

Please Note: This Lot is located in Liverpool and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.

EP ETB-12 Power Operated Swaging Machine, Max Thickness 1.2mm, Throat Depth 200mm Speed 32rpm, Cylinder Length 140mm, Foot Pedal Control with Emergency Stop Button, Brake Motor Four Sets of Standard Rolls.

Please Note: This lot is located in Liverpool and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.

Rigid Model 535 2” Capacity Pipe Threading Machine on Stand with Dies, Single Phase Electrics

Please Note: This lot is located in Liverpool and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.

XYZ Model 1400 Centre Lathe, Gap Bed, 3 & 4 Jaw Chucks, Taper Turning Attachment, Faceplate and Outside Jaws (3 Jaw) Length Between Centres 1016mm, Centre Height 178mm, above The Bed 356mm, above Transversing Slide 203mm, Spindle Bore 41mm, Turning Speed 2000rpm, Single Motor Power 5.5kw

Please Note: This lot is located in Liverpool and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.

Mitchell Gap Bed Centre Lathe 72” Between Centre, 3 & 4 Jaw Chucks, Fixed and Moving

Please Note: This lot is located in Liverpool and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.

Harrison 11” Swing Gap Bed Centre Lathe with 3 Jaw Chuck and Set of Change Gears.

Please Note: This lot is located in Liverpool and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.

Startrite 20RWS Vertical Band Sawing Machine with Movable Table, Blade Welding Attachment and Dust Extraction Unit

Please Note: This lot is located in Liverpool and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.

Imak 250mm Single Phase Circular Saw with Coolant and Mounted on Stand.

Please Note: This lot is located in Liverpool and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.

Rigid Model 300 Pipe Screwing Machine, 110 Volt Foot Pedal Control.

Please Note: This lot is located in Liverpool and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.

Ileri V315 Circular Cold Saw, 315mm Blade Diameter, Pull Down, Mitre Cutting, Capacities at 90 Degrees, 105mm Rounds, 85mm Squares, 120 x 70mm Rectangles, Capacities at 45 Degrees 90mm Rounds, 80mm Squares, 90 x 60mm Rectangles, Vice Opening 130mm with Adjustable Bar Stop, Coolant Tank and Pump, New 315mm Diameter General Purpose Blade.

Please Note: This lot is located in Chesterfield and will be loaded free of charge to a suitable vehicle. Dismantling & Loading will be at the cost of the purchaser.

Kaltenbach KKS400 Circular Cold Saw, 400mm Diameter Blade, Upstroking Semi Auto, Mitre Cutting, Coolant.

Please Note: This lot is located in Chesterfield and will be loaded free of charge to a suitable vehicle. Dismantling & Loading will be at the cost of the purchaser.

Froma Type PM15-2000 Mesh Welder, 2000mm wide capacity, Max 8mm Wire with Miscellaneous Tooling. (1984)

Please Note: This lot is located in Marple, Stockport.  Purchaser will be responsible for the safe removal, loading and transportation.

Nexus NXM325 300 Amp Mig Welder with Integral Wire Feed, Torch, Earth Clamp. S/No. 33164.

Please Note: This lot is located in Chesterfield and will be loaded free of charge to a suitable vehicle. Dismantling & Loading will be at the cost of the purchaser.

Bonevaux Hydraulic Manual Operated Portable Garage Press Model P15500

Please Note: This Lot is located in Liverpool and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.

Edwards Model 1250mm x 1.6mm Box Pan Folder with Full Set of Fingers and Backgauge.

Please Note: This lot is located in Liverpool and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.

Wagner VM5000 Electro Static Spray Unit on Trolley

Please Note: This lot is located in Chesterfield and will be loaded free of charge to a suitable vehicle. Dismantling & Loading will be at the cost of the purchaser.

Heavy Duty Box /Pan Folder (Unused), Size 1250mm x 2.5mm, (2) x Adjustable Counter Weights, Angle Stop, Segmented Top Tooling (Box and Pan) Adjustable Top Beam for different Material Thickness/Bending Radius

Please Note: This lot is located in Liverpool and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.

Wadkin VX CNC Router with SN UXFMD-91561 with Bosch Control, Drilling attachment, Table Size 1740mm x 1000mm 

Please Note: This lot is located in Bolton and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.

Edwards Pearson Mini-Shear (Unused), Size 1250mm x 3mm Cut, Manual Backguage and Front Support Arms (2016)

Please Note: This lot is located in Liverpool and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.

Koike Sanso IK 600C Series Plasma Cutter, 110 Volt Electrics.

Please Note: This lot is located in Liverpool and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.

New 95mm Square Multi Vee Die Block, length 3200mm, Containing Vees as Drawing, except 60mm wide on Drawing replace by 70mm wide Vee.

Please Note: This lot is located in Liverpool and will be loaded free of charge to a suitable vehicle. Blocking & Securing however, will be at the cost of the purchaser.