Viewing will be available by appointment only with the Auctioneer on Monday 5th June 2017 from 1pm (UK Time)

Doosan HM1000 Twin Pallet Horizontal Machining Centre with Fanuc 18i MB Control, Pallet Size: 1000mm x 1000mm, X = 2,100mm, Y = 1,250mm, Z = 1,250mm, Spindle Speeds: 2,000rpm, BT50 Spindle Nose 60-Position Tool Changer, Renishaw Probe S/No. HM10000040 (02/2009)

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Mobile Trolley with BT50 Tooling

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Fixture

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Doosan Mynx 7500/50 Vertical Machining Centre with Fanuc Series i Control, Table Area: 1,600mm x 750mm, X = ,1520mm, Y = 760mm, Z = 610mm, Spindle Speeds: 6,000rpm, BT50 Spindle Nose, 40-Position Tool Changer, Main Motor: 25HP, Probe, Chiller & Swarf Conveyor.  S/No. M75000041 (04/2010) (Excluding Vice & 4th Axis Unit)

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Nikken 4th Axis Unit with 400mm 3-Jaw Chuck

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Combination of lots 2 & 2A

Lot 2 - Doosan Mynx 7500/50 Vertical Machining Centre with Fanuc Series i Control, Table Area: 1,600mm x 750mm, X = 1520mm, Y = 760mm, Z = 610mm, Spindle Speeds: 6,000rpm, BT50 Spindle Nose, 40-Position Tool Changer, Nikken 4th Axis Unit with 400mm 3-Jaw Chuck, Main Motor: 25HP, Probe, Chiller & Swarf Conveyor. S/No. M75000041 (04/2010)

and

Lot 2A - Nikken 4th Axis Unit with 400mm 3-Jaw Chuck

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Mobile Trolley with BT50 Tooling

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

BT50 Boring Heads and Boring Bars

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Doosan DNM 650 Vertical Machining Centre with Fanuc Series i Control, Table Size: 1,300mm x 670mm, X = 1,250mm, Y = 650mm, Z = 610mm, Spindle Speeds: 8,000rpm, 40INT Spindle Taper, 30-Position Toolchanger, Chiller & Swarf Conveyor. S/No. DNM6500100 (10/2009) (Excluding Vice & 4th Axis Unit)

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

4th Axis Unit with 320mm 3-Jaw Chuck

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Combination of Lots 3 & 3A

Lot 3 - Doosan DNM 650 Vertical Machining Centre with Fanuc Series i Control, Table Size: 1,300mm x 670mm, X = 1,250mm, Y = 650mm, Z = 610mm, Spindle Speeds: 8,000rpm, 40INT Spindle Taper, 30-Position Toolchanger, Chiller & Swarf Conveyor. S/No. DNM6500100 (10/2009)

Lot 3A - 4th Axis Unit, 320mm 3-Jaw Chuck

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Qty BT 40 Tooling

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Qty BT 40 Tooling

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Doosan DNM 650 Vertical Machining Centre with Fanuc Series i Control, Table Size; 1,300mm x 670mm, X = 1,250mm, Y = 650mm, Z = 610mm, Spindle Speeds: 8,000rpm, 40INT Spindle Taper, 30-Position Toolchanger, 320mm 3-Jaw Chuck, Chiller & Swarf Conveyor. S/No. MV0011-000934 (10/2012)

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Qty BT40 Tooling

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Qty BT40 Tooling

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Qty BT 40 Tooling

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

BT 40 Boring Head Dinox KMB6336 5 – 15mm

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Cupboard with Large Qty of Collets

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Mazak E – Tower 5-Axis Multitasking Turning/Milling Machine with Matrix Control, Twin Vertical Chucks: 600mm diameter, X = 1,100mm, Y = 800mm, Z = 900mm, B-Axis: 150 Degrees, C-Axis: 360 Degrees, Speeds: 12,000rpm, 80-Position Toolchanger, Jet Coolant, (1) 600mm 4-Jaw Chuck & Chiller. S/No. 190766 (02/2007)

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Qty Capito Tooling C6-391-14-32 100

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Qty Capito Tooling C6-391-14-32 100

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Qty Capito Tooling C6-391-14-32 100

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Qty Capito Tooling C6-391-14-32 100

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Doosan Puma 700LM CNC Lathe with Fanuc 21 Control, Hydraulic 800mm 3-Jaw Chuck, Bed Size: 3,000mm, Spindle Speeds Restricted to 1,200rpm with 800mm Chuck, 12-Station Turret with Driven Tools, SMW Eslu-51-MS Autoblok Steady, Tailstock, Filtermist & Swarf Conveyor. S/No. 60LM0703 (10/2007)

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Boring Bars with Puma 700 Tool

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Doosan Puma 700LM CNC Lathe with Fanuc 32i Control, Hydraulic 600mm 3-Jaw Chuck, Bed Size: 3000mm, 12-Station Turret with Driven Tools, Tooleye, Tailstock, Hi Pressure Coolant & Swarf Conveyor. S/No. 60LM1063 (06/2010)

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Doosan Puma 480LM CNC Lathe with Fanuc 32i Control, Hydraulic 500mmm 3-Jaw Chuck, Bed Size; 2,000mm, 12-Station Turret with Driven Tools, Speeds: 1,500rpm, SMW Autoblok Steady, Tooleye, Tailstock, Hydrajet Coolant & Swarf Conveyor. S/No. ML0147-000359 (08/2014)

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne.  Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Doosan 400MB CNC Lathe with Fanuc 32i Control, Hydraulic 500mm 3-Jaw Chuck, Bed Size: 1,500mm, 12-Station Turret with Driven Tools, Tooleye, Tailstock & Swarf Conveyor. S/No. ML0130-004586 (05/2014)

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Doosan Puma 400LB with Fanuc 32i Control, Hydraulic 450mm 3-Jaw Chuck, Bed Size: 2,000mm, 10-Station Turret, Tooleye, Tailstock & Swarf Conveyor. S/No. ML0133-004496 (10/2011)

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Steady Suitable for Doosan 400

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Steady Suitable for Doosan 400

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Doosan Puma 400L CNC Lathe with Fanuc 32i Control, Hydraulic 450mm 3-Jaw Chuck, Bed Size: 2,000mm, 10-Station Turret, Tooleye, Tailstock, Swarf Conveyor. S/No. ML0133-0045528 (01/2012)

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Durma Model DCB-S800 Heavy Duty Horizontal Bandsaw with Round Column Twin Pillars, 800mm Capacity, Vice Mitre Facility, Blade: 50mm Depth, Lenox Micronizer Blade Lubrication, Twin Nozzle Coolant Supply, Screw Type Swarf Conveyor, Heavy Duty Infeed Roller Table: 1500mm X 800mm. (2014)

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Hole Drill HK-24. S/No. 9024078 (02/2002)

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Giewont Vertical FYA41M Milling Machine, Table Size 2m x 400mm, 50 International Tooling. S/No. 11/57, (1985)

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Pollard Multi Spindle Drill 31MX, Table Size 33” x 29”. Ref/No. 30444A

Please Note: This Lot is in need of repair

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

WMW PYE 100N, 100-Ton Hydraulic Press, Bed Size 4ft x 32". S/No. 022-002/8

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Amada HA 250W, Automatic Feed. S/No. 24330352 (2006)

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Amada HA 250W, Automatic Feed. S/No. 24330236 (2004)

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Pollard 2-Spindle Drill 150A/2, Table Size 2ft x 15". S/No. 308220

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Makita Bench Grinder. S/No. 17016E

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchase

Clarke Woodworker 6" Horizontal Belt Linisher

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser

Vanco 1" Vertical Belt Linisher

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Makita Bench Grinder

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

DEA Co-ordinated Measuring Machine, Table Size 650mm x 890mm. S/No. 00628

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Mitutoyo FN905 Co-ordinated Measuring Machine, Table Size 1m x 750mm. S/No. 0706541

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Baty Shadowmaster R11XL Bench Mounted Shadowgraph, Heidenhain Dro. S/No. SXL 3624

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Trimos Vectra Touch VT600MA Height Gauge. S/No. 6253

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Granite Table 800mm x 700mm and Trimos Height Gauge

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Trimos Vectra Touch VT600MA Height Gauge. S/No. 7093

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Mitutoyo Granite Table 6ft x 3ft. S/No. 516

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

SF Granite Table 4ft x 2ft

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Qty of Outside Micrometers
300 – 400mm
400 – 500mm
500 - 600mm
600 – 700mm
700 – 800mm
800 – 900mm
900 – 1000mm

with Mobile Rack

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Qty of Metric Micrometers

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Qty of Metric Micrometers & Verniers

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Set of Imperial Micrometers 0 – 1’ - 11 – 12’

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Set of Imperial Micrometers 0 – 1’ – 11 – 12’

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Set of Imperial Micrometers 0 – 1’ – 11 – 12’’

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Qty of Metric Micrometers
150 – 300mm
300 – 400mm
400 – 500mm
500 – 600mm
400 – 500mm

Please Note: This lot is located in Gateshead, Newcastle Upon Tyne. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.