2587 – Quality EDM and Wire Machinery by Exeron, Charmilles, AgieTron and ONA
Engineering
Auktion beendet am
Verbleibende Zeit
Artikelbeschreibung
Location: These Item are located in Birmingham and Ross on Wye.
Please see individual lots for loading information.
Käuferprovision
Es gilt ein Aufgeld von 16.00 %.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00 %.
Seitenaufrufe
Viewing will be available by appointment only with the
Auctioneer.
Please contact our Office on: +44 (0) 121 328 2424 or email
us at: info@cottandco.com
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.
Hinweis für die Käufer
Datum der letzten Zahlung
Endgültiges Freigabedatum
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-8 von 8
Los 1: Exeron EDM 314 4-Axis CNC EDM Machine
Exeron EDM 314 4-Axis CNC EDM Machine with Exeron High-Power Generator Technology Exopuls with Digisparc-optimised Erosion Process, Fully Integrated C Axis, 30-Position Tool Changer, Z Axis Extension to 600mm travel, Erowa ITS Chuck on quill, Power rise and fall work tank, Integrated environmentally friendly split-filter-system. Back flush system, Built in chiller unit to maintain DA temperature and precision, Fire prevention system, Traverse paths X Y Z : 900 x 750 x 600mm, Work Table X Y : 1150 x 850mm, Work Tank X Y : 1200 x 900mm, Distance table/quill min./max: 200/800mm, Electrode weight max : 50/500kg (500kg with C Axis bridge option), 3000kg Workpiece weight max, 500mm Filling height work tank, Dimensions: 2200 ...
Los 2: Charmilles Robofil 440CC Submerged 5 Axis CNC Wire EDM
Charmilles Robofil 440CC Submerged 5 Axis CNC Wire EDM with Auto Wire Thread, Charmilles Millennium Control, 30° Taper cut, Charmilles Clean Cut Generator, Submerged Cutting to 400mm, Auto wire thread, Wire capacity 0.1 - 0.33mm, Hand box control, Axis Travel : X = 550mm, Y = 350mm, Z = 400mm, Maximum work piece dimensions: X = 1200mm, Y = 700mm, Z = 400mm, 4-Side clamping frame, Large reel option fitted for extended running time. S/No. 931608 (2006)
Please Note: This Item is located in Birmingham. This lot can only be loaded to a suitable vehicle by our authorised transport. The loading fee for this item will be £250
Los 3: AgieTron 370C Large capacity 4 Axis CNC EDM Machine
AgieTron 370C Large capacity 4 Axis CNC EDM Machine, Rise & fall Worktank, Handbox for setting up jobs, Generator current: 180A, System 3R chuck on quill, 14 Position Electrode changer, Travel X Y Z : 700 x 500 x 500mm, C Axis 360 deg, Max workpiece: 1200 x 1100 x 450mm, Worktable: 1200 x 1000mm, Worktank: 1400 x 1200 x 550mm, Distance table/quill min./Max: 180/680mm, Electrode mass max: 200kg, Workpiece weight max: 2000kg, Overall dimensions W x D x H: 5000 x 5570 x 3100mm. (1990)
Please Note: This Item is located in Ross-on-Wye. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.
Los 4: ONA Datic D360 CNC EDM Machine with C Axis & Tool Changer
ONA Datic D360 CNC EDM Machine with C Axis & Tool Changer, Filter Type ONA long life, 6 position Tool Changer, Axis travel: X Y Z 300 x 600 x400mm, Working tank: X Y Z 1200 x 800 x 400mm, Work table: 650 x 400mm, Max. distance between head/table 520mm, Max. Weight of the electrode: 200Kg, C Axis, Max. Workpiece weight: 1100Kg, Footprint: WxD: 2850 x 2900mm, Power 60A, Min. Surface Finish Ra 0,63 (1998)
Please Note: This Item is located in Ross-on-Wye and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Los 5: ONA Datic D2030 CNC EDM Machine with C Axis & 3-Position Tool Changer
ONA Datic D2030 CNC EDM Machine with C Axis & 3-Position Tool Changer, ONA Datic F30 CNC control, Power 30A, Axis travel: X,Y,Z 300x200x250, Working tank: X,Y,Z 800 x 500 x 320mm, Work table: 550 x 350mm, Max. Distance between head/table 520mm, Max. weight of the electrode: 100Kg, Max. workpiece weight: 350Kg (1998)
Please Note: This Item is located in Ross-on-Wye and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Los 6: Charmilles Robofil 2000 5 Axis CNC Wire EDM Machine with Charmilles Control
Charmilles Robofil 2000 5 Axis CNC Wire EDM Machine with Charmilles Control, Axis Travel = X = 318mm, Y = 218mm, Z = 114mm, Maximum work piece dimensions - X = 1130mm, Y = 510mm, Z = 260mm, 30° Taper Cut, Submerged Cutting, Wire capacity 0.1 - 0.3mm, Auto Wire Thread, Hand Box Control, CRT Screen Monitor. (1989)
Please Note: This Item is located in Ross-on-Wye and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Los 7: Charmilles Roboform 400 CNC EDM 4 Axis Machine with Charmilles Control
Charmilles Roboform 400 CNC EDM 4 Axis Machine with Charmilles Control, C Axis and 5 ATC, Working area, Work tank dimensions. X = 1,200mm Y = 800mm, Axis Travel X = 450mm, Y = 320mm, Z = 410mm, 64 Amp Generator, C Axis, Handbox Control, Erowa chuck, 5 Position Tool Changer. (1991)
Please Note: This Item is located in Ross-on-Wye and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.
Los 8: Arburg Allrounder 270-90-500 Injection Moulding Machine
Arburg Allrounder 270-90-500 Injection Moulding Machine, Clamp force 500 Ton, Injection force 91 Ton (1988)
Please Note: This Item is located in Ross-on-Wye and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.