Esab Ultrarex UXD P2000 CNC Plasma Cutting Machine, 3000mm x 1500mm Table Size, S/No. LN3962 (2012) with Hypertherm 1650 Plasma Power Source, 0.5mm - 32mm Mild Steel, Donaldson Torit DCE 4kw Dust Extraction Unit Model DF 3-Spark, S/No. 90355658 (2012)

Please Note: This lot is located in Motherwell, Scotland and will be loaded free of charge. Blocking and securing however will be at the cost of the purchaser.

New 3200mm Long x 95mm Square Multi Vee Bending Die Block, see attached diagram for size of Vees.

Please Note: This Item is located in Chesterfield, Derbyshire and will be loaded to a suitable vehicle free of charge. Blocking and securing however will be at the cost of the purchaser.

Lot 4 - Durma HAP40160 160 Ton x 4000mm Over Bed Downstroke Hydraulic 2 Axis (X,Y) NC Press Brake with Elgo P8822 Control, Sick Operator Guards, Top and Bottom Tooling, Weight 11780kgs, S/No. 705300298 (2000)

and 

Lot 4A - New 3200mm Long x 95mm Square Multi Vee Bending Die Block, see attached diagram for size of Vees.

Please Note: These Items are located in Chesterfield, Derbyshire and will be loaded to a suitable vehicle free of charge. Blocking and securing however will be at the cost of the purchaser.

EP ASY 2500mm x 6mm Asymetric Initial Pinch Plate Bending Rolls, Roll Diameter 210mm, Power Adjustment to Back Bending Roll, Top Roll to Slip, Emergency Trip Wires, Foot Pedal Control Console (Demo Machine)

Please Note: This Item is located in Chesterfield, Derbyshire and will be loaded to a suitable vehicle free of charge. Blocking and securing however will be at the cost of the purchaser.

Roundo R2 Hydraulic Section Bending Machine, Hydraulic Adjustment to Bottom Two Rolls, Manual Guide Rolls, Angle Capacity 60 x 60 x 6mm, Flats on Flat 125 x 25mm, Flats on Edge 70 x 25mm.

Please Note: This Item is located in Chesterfield, Derbyshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.

BPR Model Z302 Mechanical Pyramid Section Bending Rolls, 35 x 35 x 4 mm Angles, Capacities: 50mm x 8mm Flats on Edge at 350mm Dia, 80 x 12mm Flats on Flat at 350mm Dia, 40 x 40 x 2mm Wall Box Section at 800mm Dia, 2 Rolls driven, Horizontal/Vertical Working Position

Please Note: This Item is located in Sheffield and will be loaded to a suitable vehicle free of charge. Blocking and securing however will be at the cost of the purchaser.

AMADA Model CSW – 200 x 200 x 3.2mm Fixed Angle Corner Notcher with 1050mm x 800mm Table Including Guides, 100mm x 50mm Rear Station Edge Notcher with 950mm x 430mm Table Including Guides, S/No 561698.

Please Note: This Item is located in Sheffield and will be loaded to a suitable vehicle free of charge. Blocking and securing however will be at the cost of the purchaser.

Comac 200 x 200 x 3.5mm Fixed Angle Corner Notcher

Please Note: This Item is located in Sheffield and will be loaded to a suitable vehicle free of charge. Blocking and securing however will be at the cost of the purchaser.

SJ 6ft x 4ft Granite Table on Adjustable Frame

Please Note: This Item is located in Chesterfield, Derbyshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.