Butler Elgamill Hi Power CNC Floor Type Milling Machine, Fanuc 21i-M CNC Control, Long Traverse 6000mm, Vertical Traverse 2200mm, Cross Traverse 1000mm, Spindle Speeds 2000rpm Spindle Taper 50 International complete with Double Knuckle Universal Head, (2) T Slotted Floor Plates, 3500 x 2000mm, Operator Platform.

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser

Butler Elgamill Hi Power L, Floor Type Milling Machine, Long Traverse 4200mm, Vertical Traverse 2100mm, Cross Traverse 1000mm, Spindle Speeds 2000rpm, Spindle Taper 50 International complete with 50 International Double Knuckle Universal Head With Power Draw Bar, 3 Axis DRO, T Slotted Floor Plate 4000 x 2500mm, S/No. 27723

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

2540 x 2025mm Powered Rotary Table complete with 1500mm Linear Traverse, Pendent Controlled.

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Webster & Bennett 72” Elevating Rail Vertical Borer, Model EV, Table Diameter 1950mm, Maximum Swing 2050mm, Maximum Height Under Cross Rail 1280mm, Turret Vertical Traverse 965mm, Turret Cross Traverse 1270mm, Turret Swivels 40 Degrees Each Way, Table Speeds 3.8 – 83 rpm, Feeds 0.002 – 0.049 Inch Per Rev, complete With 4 Table Jaws, 3 Tool Holders, 2 Axis DRO, Safety Guards, Motor 30 Hp, Electrics 415v, 3ph, 50 Cycles, Approximate Dimensions 4300 x 4500 x 3700mm, Approximate Weight 19,000kg, S/No. 5602-3

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Webster & Bennett 60” Vertical Borer, Model DH, Table Diameter 1650mm, Maximum Swing 1750mm, Height Under Cross Rail 830mm, Turret Vertical Traverse 865mm, Turret Cross Traverse 1000mm, Turret Swivels 40 Degrees Each Way, Table Speeds 4.5 – 100rpm, Feeds 0.005 – 0.25 inch Per Rev, Complete with (5) Tool Holders, 2 Axis DRO, 4 Table Jaws, Safety guards, Motor 20HP, Approximate Dimensions 3200 x 4200 x 2500mm, Approximate Weight 9500kg, S/No. 3188-4

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Giddings & Lewis Table Type Horizontal Borer, Model 340T, Table 2500 x 1220mm, Long Traverse 1750mm, Cross Traverse 2250mm, Vertical Traverse 1650mm, Spindle Speeds 10 – 1300rpm, Spindle Traverse 750mm, Spindle Diameter 100mm, Spindle Taper 50 Int, Feeds 0.002 – 0.25 Inch Per Rev, Complete With Pendent Control, Safety Brake, Outriggers, Approximate Dimensions 3800 x 6000 x 3400mm, Approximate Weight 15,000kg, S/No. 520-606-60

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser

Giddings & Lewis Air Lift Table 1830 x 1220mm

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser

Scharmann Table Type Horizontal Borer, Model FB125NC, Rotary Table 1400 x 1200mm, Long Traverse 2000mm, Cross Traverse 1800mm, Vertical Traverse 1000mm, Spindle Traverse 800mm, Spindle Diameter 125mm, Spindle Taper 50 Int, Spindle Speeds 7.5 – 1500rpm, Complete with Pendent Control, 3 Axis DRO, Safety Brake, Outriggers, Approximate Dimensions 3900 x 5700 x 3800mm, Approximate Weight 17,000kg, S/No. 64151095

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser

Kearns Wide Bed Table Type Horizontal Borer Model D3WB, Table 3960 x 1220mm, Long Traverse 1500mm, Cross Traverse 3500mm, Vertical Traverse 1470mm, Spindle Diameter 100mm, Spindle Taper 50 International, Spindle Speeds 3.9 – 825rpm, Spindle Traverse 750mm, Facing Head Diameter 685mm, Facing Slide Traverse 270mm, Facing Head Speeds 3.9 – 202rpm, Complete With Screw Cutting, 3 Axis DRO, Double Outrigger Supports, Pendent Control, Motor 20HP, Electrics 415v, 3ph, 50 Cycles, Approximate Dimensions 6100 x 6700 x 4300mm, Approximate Weight 35,000kg, S/No. 5510

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Droop & Rein Heavy Duty Vertical Milling Machine with Swivelling Vertical Head, Model FS130gku, Table 2400 x 995mm, Long Traverse 1700mm, Cross Traverse 870mm, Vertical Traverse 800mm Quill Traverse 180mm, Spindle Speeds 20 – 1000rpm, Spindle Taper 50 International, Quill Diameter 200mm, Feeds 6 – 3000mm per Min, Complete with Right Angled Milling Head, Power Draw Bar, 3 Axis DRO, Approximate Dimensions 4100 x 3400 x 3800mm, Approximate Weight 22,000kg, S/No. 3036

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Noble & Lund Heavy Duty Roll Lathe, Swing Over Bed 1371mm, Swing Over Cross Slide 1066mm, Maximum Distance Between Centres 3810mm, Spindle Speeds 1.5 – 85.6, Feeds Sliding 2 – 64CPI, surfacing 4 – 128CPI, Complete With 4 Jaw Chuck, 3 Way Tool Post, Rapid Power Traverse, Approximate Dimensions 7200 x 2700 x 2700mm, Approximate Weight 20,000kg, S/No.3870-G2

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Swift Gap Bed Centre Lathe, Model 16V5, Swing Over Bed 930mm, Swing Over Saddle 680mm, Swing In Gap 1560mm, Maximum Distance Between Centres 3050mm, Spindle Borer 105mm, Spindle Speeds 7.5 – 450rpm, Feeds Sliding 10 – 300 CPI, Surfacing 30 – 900 CPI, Tailstock Taper 6MT, Complete With 4 Jaw Chuck, 3 Point Fixed Steady, Rapid Power Traverse, Screw Cutting, Motor 20HP, Electrics 415v, 3ph, 50 Cycles, Approximate dimensions 5500 x 2100 x 1400mm, Approximate Weight 8500kg, S/No. 13108

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Dean Smith & Grace Type 21 x 168 Straight Bed Lathe, Swing Over Bed 590mm, Swing Over Saddle 400mm, Maximum Distance Between Centres 4267mm, Spindle Bore 92mm, Spindle Speeds 10 – 800rpm, Feeds Sliding 0.0014 – 0.08 Inch Per Rev, Surfacing 0.0007 – 0.04 Inch Per Rev, Complete With 3 &4 Jaw Chucks, 3 3 Point Fixed Steadies, Travelling Steady, Cross Slide Drill Attachment, Rapid Power Traverse, Screw Cutting, Change Gears, Motor 15HP, Electrics 415v, 3ph, 50 Cycles, approximate Dimensions 7100 x 1650 x 1500mm, Approximate Weight 7500kg, S/No. 35434-10-64

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Colchester Mascot 1600 Gap Bed Centre Lathe, Swing Over Bed 450mm, Swing Over Cross Slide 270mm, Swing In Gap 760mm, Maximum Distance Between Centres 2032mm, Spindle Speeds 20 – 1600rpm, Feeds Sliding 0.6 – 1mm per rev, Surfacing 0.3 – 0.5mm per rev, Complete 3 Jaw Chuck Fixed Steady, Quick Change Tool Post, Lovo Light, Coolant, Screw Cutting, Motor 12.5HP, Electrics 415v, 3ph, 50 Cycles, Approximate Dimensions 3450 x 1700 x 1500mm, Approximate Weight 2750kg, S/No. 7 0006 00327

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Dean Smith & Grace Type 2112 x 50 Gap Bed Centre Lathe, Swing Over Bed 550mm, Swing Over Cross Slide 325mm, Swing in Gap 860mm, Maximum Distance Between Centres 1270mm, Spindle Bore 82mm, Spindle Speeds 8 – 900rpm, Feeds Sliding 0.005 – 1.6mm per rev, Surfacing 0.0025 – 0.8mm per rev, Complete with Hydraulic Copy, 2 Axis DRO, 3 &4 Jaw Chucks, Fixed Steady, Change Gears, Lovo Light, Coolant, Screw Cutting, Approximate Dimensions 3200 x 1800 x 1600mm, Approximate Weight 3500kg, S/No. 39109-8-72

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Dean Smith & Grace Type 21 x 48 Gap Bed Centre Lathe, Swing Over Bed 590mm, Swing Over Saddle 380mm, Swing in Gap 920mm, Maximum distance Between Centres 1220mm, Spindle Bore 92mm, Spindle Speeds 5.3 – 600rpm, Feeds Sliding 0.0014 – 0.08 inch per rev, Surfacing 0.0007 – 0.04 inch per rev, Complete With 4 Jaw Chuck, Cross Sliding Drill Attachment, Lovo Light, Coolant, Motor 15HP, Electrics 415v, 3ph, 50 Cycles, Approximate Dimensions 3700 x 1700 x 1500mm, Approximate Weight 4000kg, S/No. 31868-
7-57

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Bridgeport CNC Teach Lathe, Model ITL400, Fanuc 21i-T CNC Control, Swing Over Bed 410mm, Swing Over Saddle 250mm, Swing in Gap 610mm, Maximum Distance Between centres 1270mm, Spindle Speeds 2500rpm, Feeds 4m min, Spindle Motor 11kw, Complete With 4 Way Quick Change Tool Post, 3 & 4 Jaw Chucks, Lovo Light, Coolant, Interlock Guards, Approximate Dimensions 2900 x 1600 x 1700mm, Approximate Weight 1900kg, S/No.B70002

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Bridgeport VMC 800-22 CNC Vertical Machining Centre with Heidenhain 426CB CNC Control, Table 1000 x 490mm, X Traverse 800mm, Y Traverse 510mm, Z Traverse 500mm, Spindle Taper 40, Spindle Speeds 6000rpm, Feeds 6m min, Complete with 22 Position ATC, Telescopic Guards, Interlock Guards, Motor 11kw, Approximate Dimensions 2900 x 2300 x 3000mm, Approximate Weight 3600kg, S/No. 720687 (1997)

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Huron KU6 Universal Milling Machine, Table 2000 x 420mm, Long Traverse 1500, Cross Traverse 700mm, Vertical Traverse 470mm, Spindle Speeds 30 – 2066rpm, Spindle Taper 40 International, Feeds Long & Cross 1.6 – 820mm min, Vertical 0.8 – 410mm min, Complete with 3 Axis DRO, Lovo Light, Approximate Dimensions 2850 x 2100 x 1800mm, Approximate Weight 4500kg, S/No. 8132

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Richmond Envoy 4’ Radial Arm Drill, Spindle Speeds 40 – 1850rpm, Spindle Taper 5MT, Feeds 0.03 – 0.66mm Per Rev, Quill Traverse 300mm, Spindle To Base Maximum 1350mm, Complete with Safety Brake, Loose Box Table, Approximate Dimensions 2000 x 900 x 2400mm, Approximate Weight 2500kg

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Jones & Shipman 540 Horizontal Spindle Surface Grinder, Wheel Diameter 178mm, Wheel Speeds 2800rpm, Complete with Eclipse 350 x 150mm Permanent Magnetic Chuck, Coolant, Lovo Light.

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Lumsden Double Ended Heavy Duty Pedestal Grinder, Model 30R9, Wheel Dimensions 300 x 70mm, Complete with Coolant, Clear View Guards, Approximate Dimensions 1300 x 850 x 1200mm, S/No. 1137 10735

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Luke & Spence Heavy Duty Double Ended Pedestal Grinder

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser

RJH 100mm Wide Horizontal Linisher

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser

T Slotted Floor Plate on Legs 3500 x 2000mm

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser

T Slotted Floor Plate 3500 x 2000mm

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser

T Slotted Floor Plate 3750 x 1525mm

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser

Miller Blue Pak 45 Mig Welder complete with Miller 20 Series Wire Feed Unit, S/No. EN60974-1

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Miller Max Star 200 Tig Welder

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser

Kemppi PS3500 Arc Welder

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser

Kemppi PS3500 Arc Welder

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser

Citoarc TAC250 Arc Welder

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser

Nexus NXM420 Mig Welder Complete with Wire Feed Unit

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser

Oerlikon Citoline 3500TS Mig Welder Complete with Oerlikon DV4004 CTL Wire Feed

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Lincoln Electric Mobile Fume Extractor 110v

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser

Nederman Fume Extractor Model 510422, 415v

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

T Slotted Box Table 1630 x 815 x 650mm

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser

T Slotted Box Table 1630 x 770 x 650mm

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser

(2) Steel Angle Plates 935 x 2145 x 915mm

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

(2) Steel Angle Plates 910 x 1525 x 585mm

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

(2) Steel Angle Plates 830 x 945 x 585mm, 830 x 1050 x 720mm

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

(2) Steel Angle Plates 795 x 600 x 460mm, 500 x 600 x 380mm

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

(2) Steel Angle Plates 500 x 580 x 410mm

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser

(3) Angle Plates

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

(2) Tilting Angle Plates

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser

(4) Angle Plates

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

(5) Setting Blocks

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

(4) Pairs of V Blocks

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

(3) Parallels and (4) Clamping Jaws

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

(9) Setting Blocks

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

(10) Setting Blocks

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser

(4) Machine Cubes

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Tilting T Slotted Table 610 x 300 x 200mm

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

(4) Machine setting Stools 915 x 300 x 415mm

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

(4) Webster & Bennett Increased Height Table Jaws 300mm High

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

(4) Webster & Bennett Increased Height Table Jaws 300mm High

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

(4) Webster & Bennett Standard Table Jaws

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

(4) Webster & Bennett Increased Height Table Jaws 150mm High

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

(4) Webster & Bennett Riser Blocks

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser

(4) Webster & Bennett Riser Blocks

Please Note: All lots are located in Thornaby on Tees. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.