Spinner Type U5-620 5-Axis Vertical Machining Centre with Siemens 840D si Control System, Maximum Spindle speed 12,000 rpm, Din 40 Spindle Taper, Axis travels X 620mm Y 520mm Z 460mm B axis -5 to +110 degrees (0.001), C axis 360 (0.001) degrees, 32 Station, ATC, Table diameter 650mm, Through Spindle Coolant, Swarf Conveyor, Coolant Filtration System, OMF 1000 Fume Extraction with Renishaw Probe Interface and Probe, Power on Time 12159hrs, S/No. UT0521 (2014)

Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Spinner Type U3-620 3-Axis Vertical Machining Centre with Siemens 840D si Control System, Maximum Spindle speed 12,000 rpm, Din 40 Spindle Taper, Axis travels X 620mm Y 520mm Z 460mm, 32 Station ATC, Table dimensions 920mm x 540mm, Through Spindle Coolant, Swarf Conveyor, Coolant Filtration System, OMF 1000 Fume Extraction, Single Long Tool Facility in working area with Renishaw Probe Interface and Probe Renishaw Tool Presetter, Power on Time 10049hrs, S/No. UT 0520 (2014)

Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Mikron Type UCP 600 5-Axis Vertical Machining Centre with Heidenhain iTNC530 Control System, Maximum Spindle speed 20,000rpm HSK A63 Spindle Taper, Axis travels X 600mm Y 530mm Z 530mm 4th 360 degrees 5th 220 degrees (+120 to -100) 30 Station ATC, Swarf Conveyor, Spindle Chiller Unit Coolant Chiller Unit, Blum Tool Presetter, Renishaw Probe Interface, Machine Hours Control on 69695hrs, Machine on 46276hrs Program run 12543hrs Drives on 37075hrs Spindle 13731hrs, S/No. 212.30.73.204 (10/2007) (Please Note: There is No Probe)

Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Doosan Type DNM 400ii 4-Axis Vertical Machining Centre with Fanuc i series Control System, Maximum Spindle Speed 12,000 rpm BT40, Spindle Taper, axis travels X 764mm Y 437mm Z 512mm 4th 360 degrees, Rapid Feed rates X Y 36 M/min Z 30 M/min, 30 Station ATC, Swarf Conveyor, Fume Extraction, Nikken 4th axis 200mm diameter with Tail Stock,
Renishaw Laser Tool Presetter, S/No. MV0009-002428 (01/2014)

Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Doosan DNM 400 4th Axis Vertical Machining Centre with Fanuc i series Control System, Maximum Spindle speed 12,000rpm, BT40 Spindle Taper, axis travels X 764mm Y 437mm Z 512mm 4th 360 degrees, Rapid Feed rates X Y 36 M/min Z 30 M/min, 30 Station ATC, Swarf Conveyor, Fume Extraction, Nikken 4th axis 200mm diameter with Tail Stock, Renishaw Laser Tool Presetter, S/No. DNM4000063 (09/2009)

Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Yang SMV600 3 Axis Vertical Machining Centre with Fanuc O-MD Control System, Maximum Spindle speed 8000rpm, BT40 Spindle Taper, axis travels X 620mm Y 430mm Z 560mm, Table dimensions 750mm x 360mm, 20 Station ATC, S/No. 200842 (02/2002)

Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Chiron FZ15W Vertical Machining Centre with Siemens 840D Control System, Twin Pallets fitted with Peiseler 4th axis, ISO 40 Spindle Taper, 20 Station Tool Changer, Knoll Coolant Filtration Unit and Swarf Conveyor, S/No. 149-92 (2007)

Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Chiron FZ12W Twin Pallet Vertical Machining Centre with GE Fanuc OM Control System, axis travels X 550mm Y 300mm Z 425mm, 12 Station Tool Changer, S/No. 181-52 (1995)

Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Dahlih DL-DMV800 Twin Pallet 3 Axis Vertical Machining Centre with Fanuc Oi MC Control System, Maximum Spindle speed 8000rpm, BT40 Spindle Taper, axis travels X 970mm Y 500mm Z 260mm, Rapid Feed rate X Y 30m/min Z 24m/min, Table dimensions 9009 x 600mm, 32 station ATC, Through Spindle Coolant, S/No. 3008010029 (03/2005)

Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Maho MH800W Machining Centre with Heidenhain 234 Control, Axis travels X 800mm Y 800mm Z 500mm, Vertical Head Manual movement 180 degrees (+ or – 90), Table dimensions 1100mm x 600mm, S/No. 082671

Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

SW Emag Type BA400 Twin Spindle 4-Axis Horizontal Machining Centre with Fanuc 16i MB Control System, Maximum Spindle speed 10,000 rpm, Spindle Taper HSK 63, distance between spindles 400mm, axis travels X 400mm Y 450mm Z 400mm, 4th axis 180 degrees, 60 Station ATC 30 per spindle Maximum tool weight 10kg, Rapid Feed rates 30m/min, Fitted with Blum Laser Probing Swarf Conveyor, Knoll Coolant Filtration System, S/No. 1640502 (2007) (Please Note: There is No Probe)

Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser

Doosan Lynx Type L220LM 2-Axis Lathe with Fanuc ii Control System, Maximum Spindle speed, Axis travels X = 220mm Z = 550, distance between centres 750mm, 12/24 Station Turret, Manual Tail Stock, Swarf Conveyor with Hydrafeed 1XMB, Barfeed 1.65m Bar Length, S/No. L220LM0684 (09/2008)

Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Puma 240LC 2 Axis Lathe with Fanuc oi-tc Control System, axis travels X 240mm Z 680m, distance between centres 700mm, 10 Station Turret, Programmable Tail Stock, fitted with 10” 3 Jaw Chuck, Parts Catcher, Tool Presetter, Multifeed ML1 Barfeed Bar length 1.3m, S/No. CT3001401 (12/2006)

Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Victor V Turn 26DT 4 Axis CNC Lathe with Fanuc 18-T Control System, axis travels Top Turret X 240mm Z 1010mm, Lower Turret X 165mm Z 980mm, distance between centres 1100mm, Rapid Feed rates X 12m/min Z 15m/min, Programmable Tail Stock, 3 Jaw 10” Chuck, Twin Tool Presetters, S/No. P1-1127 (1999)

Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Daewoo Puma 12L 2 Axis CNC Lathe with Fanuc OT Control System, axis travels X 260mm Z 1050mm, distance between centres 1000mm, 10 Station Turret, Programmable Tail Stock, Kitagawa 3 Jaw B12 Chuck, Swarf Conveyor, S/No. PL121224 (06/1997)

Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Victor Vturn 26 CNC Lathe with Fanuc OT Control System, 10 Station Turret, Tool Presetter, Programmable Tail Stock, Hydrafeed ML 1, Barfeed, Swarf Conveyor, Parts Catcher, S/No. UL-1785 (1990)

Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Takisawa Type TD 260 Twin Spindle CNC Lathe with Fanuc Control System, axis travels Head 1 X 200mm Z 280mm C 360 degrees Head 2 X 205mm Z 820mm C 360 degrees Rapid Feed rates 20 M/min, 12 Station Turrets all of which can be driven positions, fitted with 8 Chucks, Spindle maximum speed 8000rpm, Tool Presetter, Fume Extraction S/No. TALDS1008

Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Takisawa Type TC-200L3 Single Spindle CNC Lathe with Fanuc 21iTB Control System, Spindle maximum rpm 4000, axis travels X 185mm Z 185mm, Rapid Feed rates X 20 m/min Z 30 m/min, distance between centres 200mm, 8 Station Turret, Tail Stock, Swarf Conveyor, Tool Presetter, Fume Extraction, S/No. MT1677

Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

DMC DL 6GF Platten Type 2 Axis Lathe with Fanuc oi Mate-TD Control, Powered 3 Jaw Chuck, Coolant and Swarf Conveyor, Platten size 150mm x 400mm, S/No. GF6C0058 (12/2013)

Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Heidimagdeburg M300 5 Axis Lathe with Siemens 840CT Control System, axis travels X 1 = 230mm Z 1 = 1600mm X 2 = 130 Z2 = 1400, Schunk 3 Jaw Quick Change Chuck, 12 Station Upper Turret with Drives Tool Facility, 12 Station Low Turret with SMW 3 Point Steady, 8 – 101mm Capacity, programmable Tail Stock, 1500mm between centres, Swarf Conveyor, Coolant Clarifier, S/No. H150C237005 (1998)

Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Doosan V420T Twin Spindle Vertical Lathe with Fanuc Series 18T Control System, axis travels X = 210mm Z = 400mm, 12 Station Turrets, 15” Chucks, Filtermist Unit, Twin Swarf Conveyors, S/No. LTC 1076.

Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Doosan Twin Spindle Vertical Lathe Type V450TM with Fanuc 18iTB Control System, Axis Travels X = 240mm Z = 430mm C = 0.001 degrees, rapid feed rates 20m/min, maximum RPM 2500, 12 Station Turrets, all stations can be driven, Automatic Doors, Twin Swarf Conveyors, S/No. 1014 (2005)

Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Hitachi Seiki CS25 Vertical Lathe with Sigma 212 Control (Fanuc 21iTA), axis travels X = 190mm Z = 370mm, Rapid Feed Rate 30m/min, 10” Chuck, Spindle Speed 30 – 4000RPM, 12 Station VDI Turret, 8 Station Pallet Stocker, Tool Presetter, Swarf Conveyor, S/No. CS20203 (1999)

Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Hitachi Seiki CS25 Vertical Lathe with Sigma 212 Control (Fanuc 21iTA), axis travels X = 190mm Z = 370mm, Rapid Feed Rate 30m/min, 10” Chuck, Spindle Speed 30 – 4000RPM, 12 Station VDI Turret, 8 Station Pallet Stocker, Tool Presetter, Swarf Conveyor, S/No. CS20180 (1999)

Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Agie Charmilles Form 200 Die Sink CNC EDM Machine with Control, 500 x 400mm Table, 20 Station Auto Mate Electrode Change System, 3R Holder to Ran, X = 350 Y = 250 Z = 300, Fire Extinguisher, S/No. 0009 (2011)

Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Ryburn Model 40 Lapping Machine with Hemet Electronic Dispenser, 3 x 16” diameter lapping parts, S/No. 4031

Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Guyson Formula 1400 Blast Machine with Dust Collector, S/No. 505849 (2008)

Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Guyson Grit/Sand Blaster, Maximum Internal width 600mm length 700mm height 600mm, S/No. 909603 (2013) with Dust Collector, S/No. 909513 (2010), SMS Loading System type YR-HP32-B00 (2009)

Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Rumble Wash, S/No. 92068

Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Wagner Type WAM90 Automatic Saw with Full Programmable Siemens Control, Maximum Bar diameter 80mm Bar length 4.5m, 300mm Black Swarf Conveyor, S/No. 1273 (1994)

Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.

Stress Relieving Oven, Natural Gas, Maximum Temperature 550 degrees, Normal Operating Range 200 - 500 degrees, Internal Dimensions height = 1800mm length = 1800mm depth = 1200mm, supplied by JLS Ovens Ltd

Please Note: All lots are located in Huddersfield. Unfortunately there are no loading facilities available on site. Dismantling & loading will be at the cost of the purchaser.