Ernault TOYODA Type 32 CNC Crankshaft Turning Lathe with GE-Fanuc 15 T Control, 320mm Swing x 671mm Centers, 260mm Turning dia, 5000rpm, 8" SMW Autoblock Three Jaw Chuck, 12 Station VDI Turret and Tailstock, Swarf Conveyor and Coolant, S/No. 32203 (1989)

Please Note: Roller Tracking and Handling equipment is not included.

Please Note: These Items are located in Hinckley. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Ernault TOYODA Type 32 CNC Crankshaft Turning Lathe with GE-Fanuc 15 T Control, 320mm Swing x 671mm Centers, 260mm Turning dia, 5000rpm, 8" SMW Autoblock Three Jaw Chuck, 12 Station VDI Turret and Tailstock, Swarf Conveyor and Coolant, S/No. 32272 (1990)

Please Note: Roller Tracking and Handling equipment is not included.

Please Note: These Items are located in Hinckley. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

HELLER RFK200/800/1 CNC Internal Crankshaft Milling Machine with Heller Unipro NC80R Control, 200mm dia x 800mm Capacity, (2) Sets Bohlerit Internal Cutters, Coolant and Swarf Conveyor, S/No. 43.41209 (1990). Used for milling of crankshaft pins and mains bearing shaft and webs. Full range of manuals, electrical drawings and foundation plan available.

Please Note: Roller Tracking and Handling equipment is not included.

Please Note: These Items are located in Hinckley. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

TBT Tiefbohrtechnik BW200-1 CNC 7 axis Deep Hole Drilling Machine with Siemens 840D Control. Single Spindle Single Lip Deep Hole Drilling Machine with 1000mm Stroke (W axis), max depth 900mm, min drilling dia 2mm, max drilling dia 12mm, Rapid Traverse 15m/min, Feed Traverse 10m/min, Rotary Table (C axis) 800 x 600mm with Tilting (B axis) and Swivelling (A axis W axis Stroke (Drilling Spindle) 900mm, Y axis Stroke (Vertical) 600 mm, X axis Stroke (Cross) 800mm, Z axis Stroke (Rotary Table Longt) 400mm with High Pressure Coolant System and Chip Conveyor, S/No. 106021-11 (2000). Full set of manuals and drawings available. Currently used for crankshaft oil hole drilling.

Please Note: Roller Tracking and Handling equipment is not included.

Please Note: These Items are located in Hinckley. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Toyoda 60M GP72-63 CNC Straight Approach Cylindrical Grinder with Toyoda Toyopuc Control, 320mm dia x 500mm capacity, Marposs E39 auto sizing for lateral location, Marposs E78 Wheel Balancing, Diamond Roll Auto Wheel Dressing, CNK Coolant Clarifier, Mfg/No RCJ-1955, Mach/No. RC1955 (1990). Manuals and drawings available. Used for grinding of crankshaft mains bearing.

Please Note: Roller Tracking and Handling equipment is not included.

Please Note: These Items are located in Hinckley. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Toyoda G32N-50N CNC Angle Approach Cylindrical Grinder with Toyoda Toyopuc Control, 320mm dia x 500mm capacity, Toyoda Automatic Lateral Locator, Automatic Wheel Dressing, CNK Coolant Clarifier (used for grinding crankshaft spigot/spline end), Mfg/No LG-5324, Mach/No RC-1949 (1990). Manuals and drawings available.

Please Note: Roller Tracking and Handling equipment is not included.

Please Note: These Items are located in Hinckley. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Toyoda GLA4-50M CNC Angle Approach Cylindrical Grinder with Toyoda GC32V Control, 320mm dia x 500mm capacity, Automatic Lateral Locator, Automatic Wheel Dressing, Losma Coolant Clarifier (used for grinding crankshaft taper end), Mfg/No. LG-5898-3, Mach/No. RC-6892 (1998). Manuals and drawings available.

Please Note: Roller Tracking and Handling equipment is not included.

Please Note: These Items are located in Hinckley. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Lot 1 - Ernault TOYODA Type 32 CNC Crankshaft Turning Lathe with GE-Fanuc 15 T Control, 320mm Swing x 671mm Centers, 260mm Turning dia, 5000rpm, 8" SMW Autoblock Three Jaw Chuck, 12 Station VDI Turret and Tailstock, Swarf Conveyor and Coolant, S/No. 32203 (1989)

Please Note: Roller Tracking and Handling equipment is not included.

and

Lot 2 - Ernault TOYODA Type 32 CNC Crankshaft Turning Lathe with GE-Fanuc 15 T Control, 320mm Swing x 671mm Centers, 260mm Turning dia, 5000rpm, 8" SMW Autoblock Three Jaw Chuck, 12 Station VDI Turret and Tailstock, Swarf Conveyor and Coolant, S/No. 32272 (1990)

Please Note: Roller Tracking and Handling equipment is not included.

and

Lot 3 - HELLER RFK200/800/1 CNC Internal Crankshaft Milling Machine with Heller Unipro NC80R Control, 200mm dia x 800mm Capacity, (2) Sets Bohlerit Internal Cutters, Coolant and Swarf Conveyor, S/No. 43.41209 (1990). Used for milling of crankshaft pins and mains bearing shaft and webs. Full range of manuals, electrical drawings and foundation plan available.

Please Note: Roller Tracking and Handling equipment is not included.

and

Lot 4 - TBT Tiefbohrtechnik BW200-1 CNC 7 axis Deep Hole Drilling Machine with Siemens 840D Control. Single Spindle Single Lip Deep Hole Drilling Machine with 1000mm Stroke (W axis), max depth 900mm, min drilling dia 2 mm, max drilling dia 12mm, Rapid Traverse 15m/min, Feed Traverse 10m/min. Rotary Table (C axis) 800 x 600mm with Tilting (B axis) and Swivelling (A axis W axis Stroke (Drilling Spindle) 900mm, Y axis Stroke (Vertical) 600 mm, X axis Stroke (Cross) 800mm, Z axis Stroke (Rotary Table Longt) 400mm with High Pressure Coolant System and Chip Conveyor, S/No. 106021-11 (2000). Full set of manuals and drawings available. Currently used for crankshaft oil hole drilling.

Please Note: Roller Tracking and Handling equipment is not included.

and

Lot 5 -Toyoda 60M GP72-63 CNC Straight Approach Cylindrical Grinder with Toyoda Toyopuc Control, 320mm dia x 500mm capacity, Marposs E39 auto sizing for lateral location, Marposs E78 Wheel Balancing, Diamond Roll Auto Wheel Dressing, CNK Coolant Clarifier (used for grinding of crankshaft mains bearing), Mfg/No RCJ-1955, Mach/No. RC1955 (1990). Manuals and drawings available. Used for taper grinding crankshaft spigot/spline end.

Please Note: Roller Tracking and Handling equipment is not included.

and

Lot 6 - Toyoda G32N-50N CNC Angle Approach Cylindrical Grinder with Toyoda Toyopuc Control, 320mm dia x 500mm capacity, Toyoda Automatic Lateral Locator, Automatic Wheel Dressing, CNK Coolant Clarifier (used for taper grinding crankshaft spigot/spline end), Mfg/No LG-5324, Mach/No RC-1949 (1990). Manuals and drawings available.

Please Note: Roller Tracking and Handling equipment is not included.

and

Lot 7 - Ernault TOYODA Type 32 CNC Crankshaft Turning Lathe with GE-Fanuc 15 T Control, 320mm Swing x 671mm Centers, 260mm Turning dia, 5000rpm, 8" SMW Autoblock Three Jaw Chuck, 12 Station VDI Turret and Tailstock, Swarf Conveyor and Coolant, S/No. 32203 (1989)

Please Note: Roller Tracking and Handling equipment is not included.

Please Note: These Items are located in Hinckley. Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.