Comapac Multipass Cold Drawing Rebar Line. S/No. 00-24 (2000)

The plant consists of the following units:

Comapac Model PVD2 Unwinding Vertical Double. S/No. 00-24-1 (2001)
Flexing Group, Model SN/9. S/No. 00-24-4 (2000)
Scaling Machine for Calamine, Model SC6R. S/No. 00-24-3 (2000)
Comapac CO-LO15 Monobloc Horizontal Axis. S/No. 00-24-2 (2001)
Comapac Model BT40-U Horizontal Bobin. S/No. 00-24-5 (2000)
The system works "rods" from 5.5mm to 13 mm, working speed up to 12 m / sec.

Please Note: This Item is located in Faenza, Italy - Dismantling and Loading will be at the cost of the purchaser

Line for Rebar, Cold Rolling Mill Model TV40/2 (1979)

Consisting of the following units:

Comapac Model PVD2 Double Vertical Positioner. S/No. 96/55 (1997)
Flexing Group
Group Distribution Staerato
Possibility of returning to the second step of "Head of Turkish" brand FROMA
Monobloc Model TV40/2 Vertical Axis Mill
Bobin Mill
The system works "rods" 5,5 mm up to 9mm

Working speed up to 6 m / sec

Please Note: This Item is located in Faenza, Italy - Dismantling and Loading will be at the cost of the purchaser

Automatic for production of Armour of panel curtain 'Effeci'

The plant is used for the manufacture of armor shaped for infill panels, curbs, and pillars, welding of wire mesh.
The plant consists of the following units:

Vibrant Tour, Welding, Cross warehouse, Group of shaping S/No. 00720 (2002)
Extraction and positioning Effeci, S/No. 00721 (2003)
Piegareti, Maximum length producible networks: cm. 1200, Maximum width producible networks: cm. 160, Maximum longitudinal diameter: 14 mm, Maximum transverse diameter: 8 mm, N.max longitudinal bars: 6, Minimum longitudinal pitch: 50 mm and Maximum feed rate: 60 beats / minute.

Please Note: This Item is located in Faenza, Italy - Dismantling and Loading will be at the cost of the purchaser

Qty 10 Coils (Bobbins)

Please Note: This Item is located in Faenza, Italy - Dismantling and Loading will be at the cost of the purchaser

Qty 10 Coils (Bobbins)

Please Note: This Item is located in Faenza, Italy - Dismantling and Loading will be at the cost of the purchaser

Qty 5 Coils (Bobbins)

Please Note: This Item is located in Faenza, Italy - Dismantling and Loading will be at the cost of the purchaser

Qty 2 Coils (Bobbins)

Please Note: This Item is located in Faenza, Italy - Dismantling and Loading will be at the cost of the purchaser

Omes RF20 Straightening & Cutting Machine, Straightening composed of Cabinet, Wire Diameter: 8 – 14mm, Feed Speed: +/- 60m/min, Workable's Smooth Round: 5 – 20mm, Workable Ribbed Rebar: 4 – 16mm, Minimum Cutting Length: 500mm, Maximum Cutting Length: 12000mm, Type of Workable Material: Round Steel Construction – Smooth or Ribbed

Please Note: This Item is located in Faenza, Italy - Dismantling and Loading will be at the cost of the purchaser

Manipulator Yard, served to raise the welded mesh. The manipulator is applied to the Crane with adjustable pneumatic clamps, networks raise up to 12m wide, Max. Capacity: 540kg. S/No 0210 (2010)

Please Note: This Item is located in Faenza, Italy - Dismantling and Loading will be at the cost of the purchaser

Manipulator Yard, served to raise the welded mesh. The manipulator is applied to the Crane with adjustable pneumatic clamps, networks raise up to 12m wide,  Max. Capacity: 540kg. S/No. 0310 (2010)

Please Note: This Item is located in Faenza, Italy - Dismantling and Loading will be at the cost of the purchaser

Manipulator Yard, served to raise the welded mesh. The manipulator is applied to the Crane with adjustable pneumatic clamps, networks raise up to 12m wide, Max. Capacity: 678kg. S/No. 0107 (2007)

Please Note: This Item is located in Faenza, Italy - Dismantling and Loading will be at the cost of the purchaser