Harrison Alpha 400 Plus Centre Lathe with Harrison GE Fanuc Control, Swing Over Bed 400mm, Distance Between Centres 1200mm, Spindle Bore 50mm, Spindle Speeds 15 to 2500 RPM. S/No. P30063 (1998)

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

XYZ Proturn 410 CNC Centre Lathe with LX3 Control, Swing Over Bed 470 mm, Distance Between Centres 1250mm, 3-Jaw Chuck, Fixed Steady (1998)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

XYZ Pro 2000 2-Axis CNC Turret Mill with Proto Trax Age 2 Control, Table Size 50" x 10", Spindle Taper R8, Spindle Speeds 60 - 4200 RPM Variable, X Axis 30", Y Axis 16", Spindle Motor Size 3HP.

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Harrison M400 Gap Bed Centre Lathe, Centre Height 200mm, Swing Over Bed 420mm, Swing Over Gap 610mm, Distance Between Centres 1000mm, Spindle Speeds 40 to 2000rpm, Spindle Bore 65mm, 3 Jaw Chuck, Quick Change Tool Post, Metric Leadscrew & Dials

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Startrite Type 316H Vertical Bandsaw, Tables Front 26" x 26", Tables Rear 22" x 13", Throat: 36", Daylight: 16", Variable Speed, Blade Welder, Power Feed. S/No. 68748

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Pearson Model 10.5 Hydraulic Guillotine, Capacity 10' x ½", Power Back Guage, 120" Squaring Arm, Front Supports. Machine No. 4017

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Elga Type Hydrashear 1018 Hydraulic Guillotine, Capacity 10' x 1/8". S/No. 101870174

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.

Morgan Rushworth Type PBR 2500 x 4 Pyramid Powered Bending Rolls, Top Roll 2500mm x 150mm. Bottom Roll 2500mm x 125mm.

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.

Rico Type 1530 Hydraulic Press Brake, Capacity 1500mm x 30 Ton, Manual Back Gauge. S/No. 477 (1989)

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Pedrazzoli Universal Brown 32 Mandrel Type Tube Bender

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Butler 26" Super Shaper Tee Slotted Cube Table, 26" x 22 1/2" x 22" Deep with 15" Swivel Base Vice.

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Union BFT 80/3 Facing & Boring Machine with wide bed, Table 1400 x 1250 mm, Cross traverse 1650 mm. 40int Spindle, Universal Milling head, DRO.

Please Note: This Item has been professionally dismantled for loading

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

SDMO Type J200K Diesel Generator, 200KVA, Sound Pressure 95 dB (2007) with Titan 2000 Litre Diesel Tank.

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Rambaudi Ram Mill Vertical Milling Machine, Table size 1600 mm x 500 mm, Table long travel 1150 mm, Table cross 650 mm, Quill travel 150 mm, Vertical travel of heed 650 mm, Spindle size & speeds 50 ISO, 50 –3000 RPM, Feeds .0015, .006, .003, With Digital Readout.

Please Note: This Item is located in Doncaster, Unfortunately there are no loading facilies on site. Dismantling & Loading will be at the cost of the purchaser

Cincinnati 315-15-VERT-EBO Vertical Milling Machine, Table 68" x 16", Spindle Taper 50 ISO. Spindle Speeds 16 to 1600 RPM

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Dean Smith & Grace Type 21x108 Centre Lathe, Swing Over Bed 21", Distance Between Centres 108", Spindle Bore 3 1/2", Spindle Speeds 10 - 800rpm, 4 Way Tool Post, 2 Point Steady, 3 Jaw Chuck, Face Plate

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Harrison M390 Gap Bed Centre Lathe, Swing Over Bed 400mm, Swing In Gap 585mm, Distance Between Centres 1250mm, Spindle Bore 54mm, Spindle Speeds 25-2000rpm, Metric Leadscrew & Dials, Quick Change Tool Post, 3 Jaw Chuck

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Colchester Mastiff 1400 Gap Bed Centre Lathe, Distance Between Centres 80", Swing Over Bed 21", Swing In Gap 31", Spindle Bore 3 1/2", Spindle Speeds 18-1400 rpm, 3 Jaw & 4 Jaw Chuck, 3 Point Steady.

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Colchester Triumph 2000 Gap Bed Centre Lathe, 15" Swing over Bed, 9 1/2" Swing over Cross slide, 23" Swing in Gap, 50" Between Centres, 2 1/8" Spindle Bore, Speeds 25-2000rpm. 3 Jaw Chuck.

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Ikegai A20 Centre Lathe, Swing Over Bed 18", Distance Between Centres 48", Spindle Bore 1 7/8", Spindle Speeds 18-2000rpm, 10 1/2" 3 Jaw Chuck

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Harrison VS330TR Tool Room Centre Lathe, Swing Over Bed 13", Distance Between Centres 24", Variable Speed, 3 Jaw and 4 Jaw Chucks, Quick Change Tool Post

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Colchester Chipmaster Variable Speed Centre Lathe, Swing Over Bed 11 3/4", Distance Between Centres 20", Spindle Speeds 35-3000 RPM, Quick Change Toolpost, 3 Jaw and 4 Jaw Chucks.

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Turbex 2000 Programable Parts Washing & Drying Machine, Washing Drum 13 Diameter x 20" Long.

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Emi-Mec Type S Plug Board Auto Capstan Lathe, 2" Capacity with Bar Feed

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Brown & Sharpe Type No.2 Auto Screw Machine

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Jones & Shipman 1300 EIU Universal Cylindrical Grinder, Capacity 10" x 27", Internal Spindle. Swivel Wheel Head, Swivel Workhead, Swivel Table, 3 Jaw Chuck, 2 Point Steady. Wheel Radius Dressing Attachment, Wheel Dresser

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Jones & Shipman Type 540LAR Surface Grinder, Capaity 18" x 6", Variable Feed, 18" x 6" Magentic Chuck.

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Jones & Shipman 1011 P Hydraulic Surface Grinder with Coolant tank, Magnetic Chuck 610 mm x 200 mm, Power Rise & Fall to head

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Jones & Shipman Type 1310 Cylindrical Toolroom Grinding Machine, Capacity 8" x 18".

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Jones & Shipman Type 540 Surface Grinder. Capacity 18" x 6".

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Elliot Type 8-20 Toolroom Surface Grinder, Capacity 8" x 20"

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Eagle Surface Grinding Machine, Capacity 14" x 6"

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

LeBlond C-40 Tilt Head Tool & Cutter Grinder.

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

ABAC Model VT60 Rotary Screw Compressor, Power: 45 KW, Working Pressure 8 Bar. Air Displacement: 6.9m/min, CFM: 250, Noise Level: 74 dB(A), Run Hours: 40 868.

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

ABAC Model VT30 Rotary Screw Compressor, Power: 22 KW, Pressure: 8 Bar, Air Displacement: 3.32m/min, CFM: 120. Noise Level: 72 dB(A). Run Hours: 56 320

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

XYZ DPM CNC Bedmill with Proto Trak A.G.E.3 Table 1372 x 355 mm, Long travel (X axis) 745 mm, Cross Travel (Y axis) 500 mm. Head Travel ( Z Axis) 500 mm. Spindle Taper 40 ISO. (1997)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Cincinnati No.2MI Universal Milling Machine, Table Size 53" x 10", 40 ISO Vertical Head, Spindle Taper 50 ISO, Speeds 25 - 1500rpm, Swivel Table, Power Feeds All Ways, Arbors and Supports.

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Cincinnati Toolmaster Turret Milling Machine, Table Size 43" x 12", Spindle Taper 40INT, Variable Spindle Speeds.

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Dufour Type 223 Horizontal Milling Machine, Table 1015mm x 320mm x Traverse 900mm. 40 INT Taper, Speeds 24 to 1500 RPM.

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Kearney & Trecker 7.1/2H - No.3 Model CE Universal Milling Machine, Table Size 67" x 15". Spindle Taper 50INT, Spindle Speeds 25-1300 RPM

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Kasto Type PBA 320/460 Automatic HD Horizontal Bandsaw, Capacity Auto Feed, 320mm Diameter, Single Feed 460mm Diameter, Max Auto Cut Length 580MM.

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Eisele Type VM5 11PV Semi Auto Cut Off Saw, Wheel Diameter 280mm, Cutting Capacity 100mm,Mitring Table, Pneumatic Vice

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

EISELE Type VM5 11PV Semi Auto Cut Off Saw, Wheel Diameter: 280mm, Cutting Capacity: 100mm, Mitring Table, Pneumatic Vice

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Pacm 250 Advanced Cutting Machine with Elgo Type 86 Control

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Pacm 250 Advanced Cutting Machine with Elgo P8721 Control

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Cutmaster 20" Abrasive Chop Saw, Power Feed (Variable) Motor 11 KW.

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Wicksteed Power Hacksaw, Capacity 8" Round

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Pollard Type 100 A/6. 6 Spindle Pillar Drill, Table Size 47" x 10", Rise And Fall, Spindle Speeds 660 to 3740, Throat 8"

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Herbert No.2 Flash Tapper, Pedestal Type, Table Size 15" x 13" with Change Gears, Capacity 1/2" (Max) with Coolant

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Meddings Pacera F14 Articulated Pillar Drill, Spindle Taper 2 Morse Taper, Drilling Capacity: 7/8", Spindle Speeds: 80 -4000rpm, Table Size: 20" x 20",Throat: 14", Low & High Speed Back Gear, Rack & Pinion Rise & Fall Table

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Arboga Pedestal Drill, 4 Morse Taper, Table Size 23" x 20", Speeds 80-890 RPM

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Drummond Type 30/18 Hydraulic Straightening Press, Capacity 30 ton, Throat 14", Daylight 22". Stroke 20", Table Size Approx 9' Long

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Keetona Type HUF Hydroform Power Metal Bending Machine, Capacity 100" x 1/8". (2540mm x 3mm).

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Marlco Hydraulic Vertical Broach Press, 24" Between Side Frames, 24" Ram Stroke, Capacity 20 Ton, Down Speed: 26" Per Min (20 Ton), UP Speed 85" Per Min (7 Ton), Motor Size: 3 HP

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Laycock Model 1551 Hydraulic Press, Max Load 60 Ton, Between Frames 27 3/4", Max Daylight: 38", 4 Screw Rise & Fall System

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Euromac Combibend 160 Horizontal Bending Machine, Fully Manual or Electronic Memory For 50 Positions, Working Pressure: 16 Ton, Max Pressure: Bar 240, Length of Stroke: 200mm, Working Surface 460 x 920mm, 3 Phase Motor 1.5 Kw, Oil Tank Capacity: 60 Litres.

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Morrisflex Type 45.0706 Flexable Linishing Machine, 50mm Wide Belt with Dust Extraction

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Precision LAP 400 Bench Type Lapping Machine, Lapping Plate 400mm Diameter with 3 Lapping Rings and Cabinet

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

RJH Bison Double Ended Pedestal Grinder, Wheel Size: 350mm x 50mm, Wheel Bore 35mm, Spindle Speed 1500 RPM, Motor Size 3 HP with Lo-Vo Light

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

FMB Type DC-45 Bar Preperation Machine, Chamfer and Turning, Max Bar: 40mm

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser