PIOVAN/IMP s.s. silos for PET, Cap. 30.000 lt, size approx. diam. approx. 3,00 X 6,00 m h, with 3 volume level meter, loading hopper (dismanteled ) with loading device. Bottom discharging and blowing unit, included by side material suction and filtering unit, (CE Marked)

Please Note: This Item is located in Fontaniva, Padua Italy

PIOVAN/IMP s.s. silos for PET, Cap. 30.000 lt, size approx. diam. approx. 3,00 X 6,00 m h, with 3 volume level meter, loading hopper with loading device. Bottom discharging and blowing unit, included by side material suction and filtering unit, ( CE Marked)

Please Note: This Item is located in Fontaniva, Padua Italy

PIOVAN/IMP s.s. silos for PET, Cap. 30.000 lt, size approx. diam. approx. 3,00 X 6,00 m h, with 3 volume level meter, loading hopper with loading device. Bottom discharging and blowing unit, included by side material suction and filtering unit, ( CE Marked )

Please Note: This Item is located in Fontaniva, Padua Italy

PIOVAN/IMP s.s. silos for PET, Cap. 30.000 lt, size approx. diam. approx. 3,00 X 6,00 m h, with 3 volume level meter, loading hopper with loading device. Bottom discharging and blowing unit, included by side material suction and filtering unit, ( CE Marked)

Please Note: This Item is located in Fontaniva, Padua Italy

PIOVAN s.s.silos, cap. approx. 4000 lt, with discharging and blowing unit on the bottom, + n. 2 collecting tanks for PP/PET ( CE Marked)

Please Note: This Item is located in Fontaniva, Padua Italy

PIOVAN s.s. silos, cap. approx. 4000 lt, with discharging and blowing unit on the bottom, for PP/PET ( CE Marked)

Please Note: This Item is located in Fontaniva, Padua Italy

PIOVAN Crystallization and drying unit for PET, made of: n. 2 natural gas operated heating units , n. 2 steam heaters, n. 2 intermediate silos of different cap., n.3 cyclone filters, n.1 filter, included, on the lower level area, dryer, aspiration and filtering unit on skid. (One reductor missing)

Please Note: This Item is located in Fontaniva, Padua Italy

PIOVAN Crystallization and drying unit for PET, made of: n. 2 natural gas operated heating units , n. 2 steam heaters, n. 2 intermediate silos of different cap., n.3 cyclone filters, n.1 filter, included, on the lower level area, dryer, aspiration and filtering unit on skid</p>

Please Note: This Item is located in Fontaniva, Padua Italy

PIOVAN Crystallization and drying unit for PET, made of: n. 2 natural gas operated heating units , n. 2 steam heaters, n. 2 intermediate silos of different cap., n.3 cyclone filters, n.1 filter, included, on the lower level area, dryer, aspiration and filtering unit on skid

Please Note: This Item is located in Fontaniva, Padua Italy

PIOVAN Crystallization and drying unit for PET, made of: n. 2 natural gas operated heating units , n. 2 steam heaters, n. 2 intermediate silos of different cap., n.3 cyclone filters, n.1 filter, included, on the lower level area, dryer, aspiration and filtering unit on skid

Please Note: This Item is located in Fontaniva, Padua Italy

ST MACHINE Emulsion oil system, made of: Group of mixed jacket tanks with n. 2 tanks cap. 10.000 lt, n.1 tank cap. 7000 lt, n.2 tanks cap 1.200 lt., heat exchanger, jacket tank for demineralized
water, with electric control panels, various valves, accessories and pumps within mentioned area ( CE Marked)</p>

Please Note: This Item is located in Fontaniva, Padua Italy

BONO Steam Boiler 3.000.000 cal/h, hot oil undirect process, natural gas operated , diathermic oil heating and vaporizer with hot water, oil /steam heat exchanger for steam production, condensation tank and external diathermic oil tank for recovering, compensation and storaging, ( CE Marked)

Please Note: This Item is located in Fontaniva, Padua Italy

ACQUACUBIC Water softener 6mc/h, pressure 2 bar, (CE Marked)

Please Note: This Item is located in Fontaniva, Padua Italy

IDROBIOS Reverse osmosis water conditioner, with plastic tank cap. 10.000 lt, (CE Marked)

Please Note: This Item is located in Fontaniva, Padua Italy

MC QUAY Air Cooled liquid chiller with electric control panel on board, size approx. 2,5x2,2x2,5h m( CE Marked)

Please Note: This Item is located in Fontaniva, Padua Italy

MC QUAY, air cooled liquid chiller with electric control panel on board, and service tank behind size approx. 2,5x2,2x2,5h m( CE Marked)

Please Note: This Item is located in Fontaniva, Padua Italy

MC QUAY, air cooled liquid chiller with electric control panel on board, and service tank behind size approx. 2,5x2,2x3,5h m( CE Marked)

Please Note: This Item is located in Fontaniva, Padua Italy

EVAPCO Evaporative Condenser Engines 36/8, pump engine Kw 5,5 type LSWA - P270 13, s.n. 21848/1, size approx. 11,00x4,00x4,00h m
(CE Marked)

Please Note: This Item is located in Fontaniva, Padua Italy

HYPOX Spinnerettes cleaning unit with oven and ultrasonic washing system, ROD HYP 10/10 MI, Serial 162001, with n.2 steel basin,size approx. 600x2,5x2h ( CE Marked)

Please Note: This Item is located in Fontaniva, Padua Italy

Steel support structure, cap. 250kg/mq, size approx. 4,50x4,70x3,00h m and 10,00x22,00x3,00h m extruders and spinning heads area, with FACCO bridge crane, cap. 5 ton, year 2009, 4 m working width (CE marked)

Please Note: This Item is located in Fontaniva, Padua Italy

Steel support structure, cap. 400 kg/mq, crystallization area, size approx. 3,80x7,80 17,00x30,00 ( CE Marked)

Please Note: This Item is located in Fontaniva, Padua Italy

PIOVAN Feeder for (Battaglio) Extruder, weight control system, with tank and electric control panel, Blower included. ( CE Marked)

Please Note: This Item is located in Fontaniva, Padua Italy

BANDERA Twin-screw extruder - serving both two production lines - equipped for PET, chip / flakes or PP chips, included gravimetric raw matherial supply system ( touch screen missing) and support steel structure. BIDIPLAST filter including electric control panel and PLC, screen and computer missing ( CE Marked)

Please Note: This Item is located in Fontaniva, Padua Italy

BATTAGLIO Single screw extruder equipped for PET chips/flakes with electric control panel ( CE Marked)

Please Note: This Item is located in Fontaniva, Padua Italy

EREMA Continuous melt filters unit with 6 cylinders, with electric control panel, fully automatic and backwash system (CE Marked)

Please Note: This Item is located in Fontaniva, Padua Italy

Melt transfer lines with DYNISCO sensors and XALOY pump

Please Note: This Item is located in Fontaniva, Padua Italy

TFE/TONIOLO, 8 heads short spinning unit included spinnerettes, service pumps and reductors, MARTEL air treatment unit , CE Marked, mod. 10, s.n. 1241 , year 2000 , fans and 8 dismantled diffusers

Please Note: This Item is located in Fontaniva, Padua Italy

NEUMAG first step drafter frame unit by hot water, hot-cool water circuit exchanger, with 7 chromate cylinders type 4963/1, s.n. 90000211/1, size approx. 3,00x3,00x2,50 h m

Please Note: This Item is located in Fontaniva, Padua Italy

TFE Steam injection drafting oven, size approx. 3,00x2,00x1,50h m, (CE Marked)

Please Note: This Item is located in Fontaniva, Padua Italy

NEUMAG, second step drafter frame unit, by hot water, with 7 ceramic cylinders, size approx. 3,00x5,00x2,5 h m

Please Note: This Item is located in Fontaniva, Padua Italy

NEUMAG, n. 2 Calanders with 8 ceramic cylinders/each, diam. 70 cm each, type 648777, s.n. 90.0432.17

Please Note: This Item is located in Fontaniva, Padua Italy

NEUMAG, third step drafter frame unit, with 7 ceramic cylinders in total, out of which n.3 by steam and n.4 by cool water, size approx. 3,00x2,00x2,00h m

Please Note: This Item is located in Fontaniva, Padua Italy

NEUMAG, Drafter frame unit with chromate cylinders, size approx. 2,00x2,00x2,5 m

Please Note: This Item is located in Fontaniva, Padua Italy

NEUMAG TFE, Steam chamber and crimper, included reductors, hot and cool water circuit exchanger for cylinders cooling (CE Marked)

Please Note: This Item is located in Fontaniva, Padua Italy

Fyber Transfer System, Size Approx. 0,20x6,00x3,00h m (CE Marked)

Please Note: This Item is located in Fontaniva, Padua Italy

NEUMAG Steam drying oven MAC, type 64200/0, s.n. 90.0432.29, with coolying fan, size approx. 23x3,00x2,5 h m

Please Note: This Item is located in Fontaniva, Padua Italy

TFE Compensation pulling unit , size approx. 2,00x2,00x3,00 h m (CE Marked)

Please Note: This Item is located in Fontaniva, Padua Italy

TFE Twin rotative textile fiber cutter, size approx. 3,00x3,00x2,5 h m (CE Marked)

Please Note: This Item is located in Fontaniva, Padua Italy

GUALCHIERANI Automatic baling press, two operation heads for continuous process, with electric control panel, oleodinamic service unit, ancillary fans and filters, support metal structure, size approx. 10x12x10h m

Please Note: This Item is located in Fontaniva, Padua Italy

SIGNODE ROBOPACK, Fully automatic bale strapping and wrapping unit, with labeler, conveyor roller and safety fence, electric control panel (CE Marked)

Please Note: This Item is located in Fontaniva, Padua Italy

EUROVENTILATORI INTERNATIONAL SPA, Exhaust steam dust cleaner, made of suction fan and filtering unit (CE Marked)

Please Note: This Item is located in Fontaniva, Padua Italy

Overhead electric cabling system for line 1 with electric boards, cables and various device, building circuits excluded (CE Marked)

Please Note: This Item is located in Fontaniva, Padua Italy

Pipes and tubes linking working areas line 1 to uitlity

Please Note: This Item is located in Fontaniva, Padua Italy

PIOVAN Feeder for (Battaglio) extruder, weight control system, with tank and electric control panel, steel structure and blower included, type DP623, s.n. 60000003872 ( CE Marked)

Please Note: This Item is located in Fontaniva, Padua Italy

BATTAGLIO, Single Screw Extruder equipped for PET chips/flakes or PP chips with electric control panel, size approx. 7,00x1,00x1,50 h m ( CE Marked)

Please Note: This Item is located in Fontaniva, Padua Italy

EREMA Continuous melt filters unit with 4 cylinders, fully automatic, with backwash system, type SV 8/1/0RTF s.n. C98/141, size approx. 2,00x2,00x2,00 m (CE Marked)

Please Note: This Item is located in Fontaniva, Padua Italy

Melt transfer line with DYNISCO sensors and XALOY pump

Please Note: This Item is located in Fontaniva, Padua Italy

TFE/TONIOLO, 8 heads short spinning unit included spinnerettes, service pumps and reductors, air treatment unit , CE Marked, mod. 10, s.n. 1241 , year 2000 , fans and 8 dismantled diffusers

Please Note: This Item is located in Fontaniva, Padua Italy

NEUMAG, first step drafter frame unit by hot water, hot-cool water circuit exchanger, with 7 chromate cylinders type 4963/1

Please Note: This Item is located in Fontaniva, Padua Italy

TFE, Steam injection drafting oven , size approx. 3,00x2,00x1,5h m (CE Marked)

Please Note: This Item is located in Fontaniva, Padua Italy

NEUMAG, second step drafter frame unit, with n.7 ceramic cylinders in total, out of which n.2 by hot water, n. 5 by steam, type 4964-2, s.n. 900002.01/2, size approx. 3,00x2,5x 2,5 h m

Please Note: This Item is located in Fontaniva, Padua Italy

NEUMAG, third step drafter frame unit, made of 7 ceramic cylinders in total, out of which n.3 by steam and n.4 by cool water, size approx. 3,00x2,00x2,00h m

Please Note: This Item is located in Fontaniva, Padua Italy

TFE, s.s. emulsion basin, size approx. 3,00x2,00x1,5h m (CE Marked)

Please Note: This Item is located in Fontaniva, Padua Italy

NEUMAG, Drafter frame unit with chromate cylinders, size approx. 2,00x2,00x2,5h m

Please Note: This Item is located in Fontaniva, Padua Italy

NEUMAG TFE, Steam chamber and crimper, included reductors, hot and cool water circuit exchanger for cylinders cooling, size approx. 2,00x2,00x2,00h m

Please Note: This Item is located in Fontaniva, Padua Italy

Fyber transfer system, size approx. 0,70x6,00x3,00h m (CE Marked)

Please Note: This Item is located in Fontaniva, Padua Italy

NEUMAG IMP, Steam drying oven, size approx. 23x2,50x3,00h m

Please Note: This Item is located in Fontaniva, Padua Italy

TFE, Compensation pulling unit , size approx. 2,00x2,00x3,00h m (CE Marked)

Please Note: This Item is located in Fontaniva, Padua Italy

TFE, Twin rotative textile fiber cutter, size approx. 3,00x3,00x2,5 h m (CE Marked)

Please Note: This Item is located in Fontaniva, Padua Italy

AUTEFA Automatic baling press, two operation heads for continuous process, with electric control panel, oleodinamic service unit, ancillary fans and filters, support metal structure, size approx. 7,00x6,00x6,00h m

Please Note: This Item is located in Fontaniva, Padua Italy