Jones & Shipman 1055 Cylindrical Grinder, 60’’ between centres, 6’’ centre height, double swivel head. S/No. B0 90344

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking & Securing will be at the cost of the purchaser.

Jones & Shipman 1310 Cylindrical Grinder, 18’’ between centres, 4’’ centre height, Single Swivel Head, Internal Spindle, Steadies, 3 & 4 Jaw Chucks.

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking & Securing will be at the cost of the purchaser

Moore No2 Jig Grinder with 19’’ x 10’’ Table. S/No. 7037

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking & Securing will be at the cost of the purchaser

Newall Jig Borer, Digipac 2 Axis Dro, Table Size 36’’ x 24’’, 6 Spindle Speeds, 40 – 2500 RPM, Qty of Tooling S/No. 54-JA-2436-133

Please Note:- This Item is located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser

Thompson Matrix Surface Grinder with 24” x 12” Electro Magnetic Chuck & Coolant. S/No. B63364X

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Lapmaster 24 Lapping Machine with 24’’ Diameter Lapping Plate. S/No. 26597

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking & Securing will be at the cost of the purchaser

Cincinnati Milacron Vertical Milling Machine with 65’’ x 14’’ Table. S/No. 11A23V1ABE-6

Please Note: Spindle drive and Table feed need attention

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking & Securing will be at the cost of the purchaser

Bridgeport Turret Mill, Power Cross Feed, Table Size 42’’ x 9’’, Qty of Tooling. S/No. BRU/2009B

Please Note:- This Item is located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser

Sterling BM50 440 CGH Automatic Horizontal Bandsaw with Manual Mitre Facility, 440mm Capacity, Automatic Feed. S/No. 1210017 (2012) Supplied New (2014)

Please Note:

The Cost of this Machine in 2014 was Circa £25,000

This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking & Securing will be at the cost of the purchaser

Thomas 315 Supercut Steel Cutting Circular Saw, 12’’ Blade & Vice, Material Support Arm. S/No. 12 01037 (2012)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking & Securing will be at the cost of the purchaser

Startrite 14 RWS Vertical Bandsaw. S/No. 38619, Table Size 500mm x 500mm with Ideal Blade Welder.

Please Note:- This Item is located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser

Stien MG50 A Pillar Drill, 15’’ x 13’’ Rise & Fall Table and Variable speed head.

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking & Securing will be at the cost of the purchaser

Stien MG50 A Pillar Drill, 15’’ x 13’’ Rise & Fall Table and Variable speed head.

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking & Securing will be at the cost of the purchaser

Archdale 3-Spindle Drill, Adjustable Height 36’’ x 15’’ Table, Handfeed to all spindles.

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking & Securing will be at the cost of the purchaser

Archdale 4ft Radial Arm Drill with Box Table 30’’ x 23’’. S/No. RD8876

Please Note:- This Item is located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser

Pollard Model 15AY Pillar Drill, Table Size 24’’ x 15 ½ ‘’. S/No. 19970A

Please Note:- This Item is located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser

Herbert Pillar Drill Table Size 16’’ x 13’’ with Coolant.

Please Note:- This Item is located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser

Isel Automation/Kress 900 Watt Engraver

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Agemaspark Type F400P20 Spark Eroder, 2kw Capacity. S/No. 652, Table Size 400mm x 260mm

Please Note:- This Item is located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser

Marr Electric Forced Air Circulating Oven, Internal Size 1250mm (H) 800mm wide x 800mm deep, Operating Temperature 320°c ± 5°c with Process Timer, Exhaust Fan, 7 day time Switch, Kent C105 Circular Recorder. S/No.  13269

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking & Securing will be at the cost of the purchaser

Rosler Rotofinish Rumbler with Timer/Controller. S/No. 12055/94/10

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking & Securing will be at the cost of the purchaser

Walther Trowal Finishing Machine with Timer and Acoustic Booth

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking & Securing will be at the cost of the purchaser

Hobart Steam Oven (Stainless Steel Construction) Oven Size 20’’ x 12’’ x 25’’ (H)

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking & Securing will be at the cost of the purchaser

Dry Corrosion Test Cabinet DCTC 1200 Chamber Size 1.7m x 0.7m x 0.55m deep

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking & Securing will be at the cost of the purchaser

Single Plane Balancer with Loher & Sohne Motor. S/No. 5684820, ID No. 400192 STD with Schenck Control System

Please Note: This lot is incomplete and in need of repair

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Deltronic DH400 Optical Profile Projector with 400mm Diameter Screen. S/No. 389075946

Please Note: This Item is located at Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Mitutoyo Type PI-250C Optical Comparator. S/No. 2067

Please Note:- This Item is located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser

Approx. 69 Pieces of Steel Panel Partitioning, Majority 8ft x 3ft

Please Note: The first photograph is a sample of the partitioning prior to removal

Please Note: This Item is located in Birmingham

Tipping Skip

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

8’’ Double Ended Grinder

Please Note:- This Item is located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser

Pair of Clamp Vices

Please Note:- This Item is located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser

Pair of Clamp Vices

Please Note:- This Item is located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser

Manual 3 Ton Chain Hoist

Please Note:- This Item is located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser

Fluidair Rotaflo L23 Air Compressor, Max Pressure 8 Bar. S/No. 20296

Please Note:- This Item is located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser

Sip Workshop Type 420/150 Air Compressor. S/No. 050 181024 (1995)

Please Note:- This Item is located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser.

Hydrovane Air Compressor

Please Note:- This Item is located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser.

Motivair Air Compressor. S/No. 25821

Please Note:- This Item is located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser

Airstream Mobile Air Compressor Model AS3HP/50

Please Note:- This Item is located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser

110V Transformer, (2) Die Grinders, Black & Decker Drill, 4'' Grinder, 6'' Grinder, 2 Ton, Floor Jack & Box of Spanners

Please Note:- This Item is located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser

Eurocup Capresso 600 Drinks machine

Please Note:- This Item is located in the West Midlands, Unfortunately there are no loading facilities at this site. Dismantling & Loading will be at the cost of the purchaser