Mazak VTC 20B Vertical Machining Centre with Mazatrol M Plus Control, BT40 Spindle Taper, 10,000 RPM Spindle Speed, 1460 x 510mm Table Area, X Axis = 1040mm, Y Axis = 510mm, Z Axis = 640mm. S/No. 136756 (1998)

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Yang Eagle SMV 1000 Vertical Machining Centre with Siemens Acramatic 2100 Control, X Axis = 1000mm, Y Axis = 510mm, Z Axis = 510mm, 1070 x 500mm Table Size, 60 – 8000 RPM Speed Range, BT40 Spindle Taper. S/No. 211302 (2000)

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Rambo 1000 Vertical Machining Centre with Mitsubishi 50M Control, BT40 Spindle Taper, 4th Axis, 420 x 1600mm Table Size, X Axis = 1000mm, Y Axis = 500mm, Z Axis = 600mm. S/No. A135 (1998)

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Dugard Eagle VMC1000 Vertical Machining Centre with Siemens Acramatic 2100 Control, 20-Station ATC, 1200mm x 500mm Table, X Axis = 1020mm, Y Axis = 510mm, Z Axis = 510mm, 8000 RPM, BT40 Spindle Taper. S/No. ML904B16 (2001)

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Binns and Berry L700 x 7250 Long Bed Lathe with 650mm 4-Jaw Chuck, Taper Turning, 2 Axis Digital Readout, 2 Fixed Steadies, Milling Head for Keyways (Removeable), 4 - 1250 RPM Spindle Speeds, 4.5'' Spindle Bore, 27.4'' Swing over bed, 19.7'' Swing over top slide, 290'' Distance between centres.

Please Note: This Item is located in Sheffield and will be loaded to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Binns and Berry Hollow Spindle Oil Country Lathe with Quick Change Toolpost, 800mm 4 – Jaw Front Chuck, 600mm 3 – Jaw Rear Chuck, Chuck Guard, Hydraulic Copy Unit,  Rapids to Saddle, 36'' Max Swing, 24'' Max Swing over Top Slide, 80'' Distance between centres, 10 1/4'' Spindle Bore, Coolant  

Please Note: This Item is located in Shildon, County Durham will be loaded to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Colchester Magnum 1250 x 1500mm Gap Bed Centre Lathe, 4-Jaw Chuck, Digital Readout, Chuck Guard, Coolant, Lo Vo light, Selection of Toolholders, 118mm Spindle Bore, 6.3 – 1250 RPM Spindle Speeds, 1500mm Distance between centres, 900mm Swing in Gap, 390mm Swing over Cross Slide, Swing over bed 635mm

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Colchester Magnum 1250 Gap bed Centre Lathe, 635 x 2500mm Capacity, 3-Jaw Chuck, Fixed Steady, 635mm Swing over bed, 390mm Swing over cross slide, 900mm Swing in gap, 2500mm Distance between centres, 6.3 – 1250 RPM Spindle Speeds, 118mm Spindle Bore

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Colchester Triumph 2000 Gap Bed Lathe, 3-Jaw Chuck, 390mm Swing over bed, 240mm Swing over cross slide, 588mm Swing in gap, 1250 Distance between centres, 25 – 2000 RPM Spindle Speeds, 54mm Spindle Bore

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Harrison Alpha 400 S plus CNC Lathe with Fanuc Control, 400mm Swing over bed, 245mm Swing over cross slide, 1250mm Distance between centres, 54mm Spindle Bore, 15-2500 RPM Spindle Speeds. S/No. S30153 (2000)

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Dean Smith & Grace Type 1709 Straight Bed Lathe, 12” dia. 3–J aw Chuck, Taper Turning, 17'' Swing over bed, 9'' Swing over Cross Slide, 60'' Distance between centres, 3 1/4'' dia Spindle Bore, 11.2 to 1250 RPM Spindle Speeds, Power Drilling attachment, Rapid Power to saddle, 4-way Toolpost, Lo – Vo light, Coolant

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Dean Smith & Grace 2112 x 80 Gap Bed Centre Lathe, 3-Jaw Chuck, Power Drilling Attachment, Fixed Steady, Change Gears, 3’’ Spindle Bore, 8-900 RPM Spindle Speed, 80’’ Distance between centres, 12’’ Swing over top slide, 21’’ Swing over bed

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Dean Smith & Grace Type 21 x 60 Centre Lathe with Taper Turning Attachment, 15’’ dia 3-Jaw Chuck, 4-way Toolpost, 3 ½ ’’ Spindle Bore, 21’’ Swing over bed, 12’’ Swing over Top Slide, 7.5 to 600 RPM Spindle Speeds, 3 ½ ’’ Spindle Bore

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Dean Smith & Grace 2112 CT Lathe, 3 Jaw Chuck, Taper Turning Rapid Traverse to Saddle, 21" Swing over Bed, 40" Max Turret to Chuck with Turret Tooling

Please Note: This Item is located in Scotland

Dean Smith & Grace Type 13 x 30 Centre Lathe, 13’’ x 30’’ Capacity, 8’’ 3-Jaw Chuck, Quick Change Tool Post, 13’’ Dia Max Swing Over Bed, 7’’ Dia Max Swing Over Cross Slide, 30’’ Distance between centres, 24.5 – 1000 RPM Speeds and Coolant

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Colchester Master VS 3250 Gap Bed Centre Lathe, 350mm Swing over bed, 196mm Swing over cross slide, 1250mm Distance between centres, 3250 RPM Max Spindle Speed, 42mm Spindle Bore (1991)

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Colchester Chipmaster 5 x 20 Lathe, 254mm Swing over bed, 508mm distance between centres, 35 – 3000 RPM Variable, 3-Jaw Chuck

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Mostana IM636-I Lathe, 3-Jaw Chuck, Power to top slide, Fixed Steady, Travelling Steady, 700mm Swing over bed, 400mm Swing over saddle, 1500mm Distance between centres, 10 – 1250 RPM Spindle Speeds, 100mm Spindle Bore. S/No. 3703 (1990)

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Ajax Premier 200 CNC Lathe with Fagor 800 T Control, 400mm Swing over bed, 1150mm Distance between centres, 2300 Max RPM Spindle Speed, 52mm Spindle Bore. S/No. 34837 B51166 (1997)

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Denford Cyclone Mirac CNC Lathe with Desktop Tutor Control, 180mm Max Turned Length, 160mm Max Turned Diameter, 250mm Swing Over Bed, 21mm Spindle Bore, 0 – 5000 RPM Speed Range, X Axis = 85mm, Y = Axis 200mm, 8-Turret Position. S/No. H01919 (2002)

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Ajax AJ165 Gap bed Centre Lathe with Quick change tool post, Fixed Steady, 150mm dia 3-Jaw Chuck, 200mm dia 4-Jaw Chuck, 35 – 1250 rpm Spindle Speeds, 37.5mm Spindle Bore, 1000mm distance between centres, 200mm swing over cross slide, 500mm Swing in Gap, 325mm Swing over bed, Travelling Steady, (4) Toolholders. S/No. 17710-351

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Fil FA160 CNC Bed Milling Machine. S/No. 388 (1997)

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Bridgeport Series 2 Interact 4 CNC Milling Machine with Heidenhain TNC 155 Control, 40 ISO Spindle, 40-4000 RPM Speed Range, X Axis = 760mm, Y Axis = 370mm, Z Axis 150mm and Tooling

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Bridgeport Series1 CNC Milling Machine with Bridgeport Boss Control, 50 - 3000 RPM Spindle Speeds, 34” x 12” Table Size, 18” Table Long Travel, 12” Table Cross Travel, 16” Max Distance Spindle Nose to Table

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Bridgeport BRJ 42’’ X 9’’ Vari Speed Milling Machine with Heidenhain 2 Axis DRO, Power Feeds To Table, 50 – 3750 RPM Variable, R-8 Spindle Taper. (1983)

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Bridgeport Series 1Variable Speed Turret Mill, 50 – 3750 RPM (Variable) Spindle Speeds, 1200mm x 225mm Table Area, R-8 Spindle Taper

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

XYZ 4000 CNC Milling Machine with ProtoTrak MX2 Control, 58’’ x 14’’ Table Size, X Axis = 40’’, Y Axis = 20’’, Z Axis = 23’’ and Power Draw Bar. S/No. 7891 (1996)

Please Note: This machine requires attention

Please Note: This Item is located in Scotland

Huron NU4 Universal Milling Machine 50 INT Spindle Taper, 8 – 1200 RPM Spindle Speeds, 20’’ Max distance spindle nose to table, 56 ½ ’’ x 18’’ Table Area, 3 Axis DRO, Lo Vo Light, Coolant. S/No. 15988 (1979)

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Cincinnati 210 – 14 – UNI-EDO Universal Milling Machine with 50 INT Universal Vertical Head, Arbor Support, 50 INT Spindle Taper, 27 – 1800 RPM Spindle Speeds, 60’’ x 40’’ Table Area

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

TOS WH63 Horizontal Borer with Universal Vertical Milling Head, 800mm x 900mm Table Size, 900 x 700 x 1000mm Traverses, 63mm Spindle Diameter, 18 – 1800 RPM Spindle Speeds, 4MT Spindle Taper, Facing Head, Tailstock, Heidenhain Digital Readout. S/No. 6608 (1973)

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Blanchard 20CK36 Rotary Table Grinder, 36’’ Magnetic Chuck Dia, 38’’ Maximum Swing, 30’’ Max Height underwheel, 5,7,10,15,20,27 RPM Chuck Speeds, 20’’ Wheel Dia, Marposs Gauging, Wheel Dresser Power Wheel Elevation, Coolant. S/No. B37-4-502

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Chevalier FGS 1640AD Surface Grinder, 1000mm x 400mm Table, 1015mm Max Grinding Length, 405mm Max Grinding Width, 620mm Max Vertical Distance to table, 355mm dia x 50mm width x 127mm Bore, Magnetic Chuck, Coolant Clarifier

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Blohm HFS 512 Surface Grinder, 1200mm Grinding Length, 550mm Grinding Width, 600mm Working Height, 1600kg Table load

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Jones & Shipman 1307 EIU Cylindrical Grinder, 14’’ x 40 Capacity

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Jones & Shipman 540P Surface Grinder with Magnetic Chuck, Coolant Tank S/No. B073678

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Ribon RUR 500 Cylindrical Grinder, 11’’ x 20’’ Capacity, 11’’ Swing, 20’’ Distance between centres, 14’’ x 1’’ x 5’’ Grinding Wheel Dia, 1700, 2100 RPM Grinding Wheel Speeds, 100, 175, 260, 400 RPM Work Head Spindle Speeds, ½’’ Spindle Bore

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Dowding and Doll V4 Universal Gear Hobber, 100mm Max Diameter of Gear, 120mm Max Face of Gear Cut, 40mm Max Diameter of Hob, 45mm Max Length of Hob, 180 – 510 RPM (4 – Off) Hobbing Speeds

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Union 14’’ x 2’’ Double Ended Pedestal Grinder

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Dormer 100 Drill Sharpening Machine, 8 - 80 mm dia (5/16" - 3 1/8") Capacity, 0 - 40 Degrees Helix Angles, 530 mm (21") Max length of drill, 200 x 112.5 x 50 mm (8" x 4.5" x 2") Grinding Wheel Size

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Butler 8’’ Precision Toolroom Slotter, 20’’ Table, 20’’ Throat, 35, 51, 77 and 115 Cycles per minute, Tilting Ram, Power Feeds, Indexing Table.

Please Note: This Item needs attention

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

DEA Coordinate Measuring Machine, 1190 x 630 x 150mm Capacity, X Axis Stroke = 710mm, Y Axis Stroke = 510mm, Z Axis Stroke = 330mm

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Asquith Power Thrust 4PT 23 – 120 10ft Radial Arm Drill, 65’’ Arm Rise and Fall, 90’’ Head Traverse, 9.5 – 1560 RPM Spindle Speed, No.6 Morse Spindle Taper, Box Table, Spindle Brake, Low Volt Light and Coolant

Please Note: This Item is located in Leicester and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Kitchen & Walker E-3 6’’ Radial Arm Drill, 72’’ x 39’’, Base Area, 29’’ Arm rise and fall, 56’’ Head Traverse, 12 – 1000 RPM Spindle Speeds, No.5 Morse Spindle Taper with Safety Brake and Box Table(1978)

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Asquith Archdale 12-42 2 PT Radial Arm Drill, No 5 Morse Spindle Taper, 40 – 2040 rpm Spindle Speeds, 1050mm Drilling Radius with Safety Brake and Coolant. S/No. P31982

Please Note:-

This Item requires attention

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Asquith 5’ OD1 Radial Arm Drill, 5 MT Spindle Taper, 25 – 580 RPM Spindle Speeds, 30’’ x 20’’ Box Table, Insta Brake, Coolant. S/No. OD1 8938

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Startrite Vertical Bandsaw, 13 ½ ’’ Throat, 21’’ x 21’’ Table. S/No. 23616

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Promecam RG-35-20 CNC Pressbrake with Autobend IV Programme Control, 35 Ton Capacity, Programmable Back Gauge, Optiscan Safety Light Guards, Large range of top and bottom tooling, 1700mm Distance between frames, 2000mm Bed Length

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Keetona Mechanical Guillotine, 80’’ x 14 SWG 1/8’’ Mild Steel Capacity with Front Supports

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.

Compac HP40 Workshop Press, 40 Ton Max Capacity

Please Note: This Item is located in Scotland and will be loaded free of charge to a suitable vehicle however blocking and securing will be at the cost of the purchaser.