PBR T-400 Gap Bed Centre Lathe, 400mm Centre Height, 6000mm Bed Length, QCTP 4-Jaw Chuck, 2 & 3 Point Steady. Spindle Bore 130mm
S/No. 81829 (1975)

Please Note:

Tooling shown on topslide is not included

This Item is located in Watford. The Fee for loading this item to a suitable vehicle by AIMS is £1875. This charge will be added to your invoice. Please make prior arrangement with Mr Martin Riddell at AIMS on 01384 350 517 - Please Note this price does not include packing or strapping - this is at the responsibility of the buyer

This Item must be collected on the 8th December 2014

Poreba PL 42-480 Gap Bed Centre Lathe, 465mm Centre Height, 4m between centres, 4-way Tool Post, 800mm 4-Jaw Chucks, 500mm 3-Jaw Chuck, 3-Point Steady, 95mm Spindle Bore, Sony DRO. S/No. 0453862

Please Note: This Item is located in Watford. The Fee for loading this item to a suitable vehicle by AIMS is £1475. This charge will be added to your invoice. Please make prior arrangement with Mr Martin Riddell at AIMS on 01384 350 517 - Please Note this price does not include packing or strapping - this is at the responsibility of the buyer

This Item must be collected on the 8th December 2014

TOS SUS 63 Straight Bed Centre Lathe, 315mm Centre Height, 3.5m between centres, 4-Way Tool Post, 500mm 4-Jaw Chucks, 400mm 3-Jaw Chuck, 2 & 3 Point Steadies, Sony DRO, 82mm Spindle Bore. S/No. 0453862

Please Note:

Centre in tailstock not included with this lot

This Item is located in Watford. The Fee for loading this item to a suitable vehicle by AIMS is £1475. This charge will be added to your invoice. Please make prior arrangement with Mr Martin Riddell at AIMS on 01384 350 517 - Please Note this price does not include packing or strapping - this is at the responsibility of the buyer

This Item must be collected on the 8th December 2014

Niles DLZ 630 Straight Bed Centre Lathe, 305mm Centre Height, 2.5m between centres, 4-Way Toolpost, 400mm 4-Jaw Chucks, 3-Point Steady, Sony DRO, 72mm Spindle Bore. S/No. 155.0023.56 (1972)

Please Note: This Item is located in Watford. The Fee for loading this item to a suitable vehicle by AIMS is £980. This charge will be added to your invoice. Please make prior arrangement with Mr Martin Riddell at AIMS on 01384 350 517 - Please Note this price does not include packing or strapping - this is at the responsibility of the buyer

Must be collected between the 9th - 17th December 2014

Dean Smith & Grace Type 17 x 96’’ Centre Lathe, 8 ½ Centre Height 96’’ between centres, 4-way Tool Post, 2 & 3 Point Steadies, 400mm 4-Jaw, 300MM 3-Jaw Chucks, Power Drilling Attachment, Sony DRO. S/No. 36491-11-66

Please Note:

Collet Chuck shown in the photographs with this lot is not included

This Item is located in Watford. The Fee for loading this item to a suitable vehicle by AIMS is £980. This charge will be added to your invoice. Please make prior arrangement with Mr Martin Riddell at AIMS on 01384 350 517 - Please Note this price does not include packing or strapping - this is at the responsibility of the buyer

Must be collected between the 9th - 17th December 2014

Collet Chuck with Collets

Please Note: These Items are located in Watford

Takisawa TC3 CNC Lathe with Fanuc 10 TF Control, 300mm 3-Jaw Hydraulic Chuck, 8-Station Turret, Tailstock. S/No. THUT 8770 MT 1004

Please Note: This Item is located in Watford. The Fee for loading this item to a suitable vehicle by AIMS is £560. This charge will be added to your invoice. Please make prior arrangement with Mr Martin Riddell at AIMS on 01384 350 517 - Please Note this price does not include packing or strapping - this is at the responsibility of the buyer

Must be collected between the 9th - 17th December 2014

Harrison M500 CNC Lathe with Anilan 1200 T-D Control Centre Height, 2m between centres, 530mm Swing Over Bed, QCTP, 3-Point Steady. S/No. 501572-1413

Please Note: This Item is located in Watford. The Fee for loading this item to a suitable vehicle by AIMS is £980. This charge will be added to your invoice. Please make prior arrangement with Mr Martin Riddell at AIMS on 01384 350 517 - Please Note this price does not include packing or strapping - this is at the responsibility of the buyer

Must be collected between the 9th - 17th December 2014

Harrison Quick Change Unit with Quick Change Tooling

Please Note: These Items are located in Watford

Colchester Triumph 2000 x 30’’ Straight Bed Centre Lathe, 7.5’’ Centre Height, 30’’ between centres, QCTP, 3-Point Steady, 3-Jaw Chuck, Face and Catch Plates. S/No. 6/0001/17471

Please Note:

Tooling shown on topslide is not included

This Item is located in Watford. The Fee for loading this item to a suitable vehicle by AIMS is £360. This charge will be added to your invoice. Please make prior arrangement with Mr Martin Riddell at AIMS on 01384 350 517 - Please Note this price does not include packing or strapping - this is at the responsibility of the buyer

Must be collected between the 9th - 17th December 2014

Collet Chuck

Please Note: These Items are located in Watford

Bridgeport Interact 308 Vertical Machining Centre with Heidenhain 2500 Control, 830mm x 300mm Table Size, 12-Station ATC. S/No. 850 82 (1990)

Please Note: This Item is located in Watford. The Fee for loading this item to a suitable vehicle by AIMS is £560. This charge will be added to your invoice. Please make prior arrangement with Mr Martin Riddell at AIMS on 01384 350 517 - Please Note this price does not include packing or strapping - this is at the responsibility of the buyer

Must be collected between the 9th - 17th December 2014

Induma VM70 Vertical Milling Machine, 1900mm x 400mm Table, Swivel Vertical Head, 50 INT Taper, 30-1500 RPM Spindle, Heidenhain DRO

Please Note: This Item is located in Watford. The Fee for loading this item to a suitable vehicle by AIMS is £650. This charge will be added to your invoice. Please make prior arrangement with Mr Martin Riddell at AIMS on 01384 350 517 - Please Note this price does not include packing or strapping - this is at the responsibility of the buyer

Must be collected between the 9th - 17th December 2014

Aldell V-35 PCD Drilling Machine

Please Note: This Item is located in Watford. The Fee for loading this item to a suitable vehicle by AIMS is £250. This charge will be added to your invoice. Please make prior arrangement with Mr Martin Riddell at AIMS on 01384 350 517 - Please Note this price does not include packing or strapping - this is at the responsibility of the buyer

Must be collected between the 9th - 17th December 2014

Kitchen & Wade E26 6ft Radial Arm Drill with 920mm x 770mm Box Table, Radius of Drill Spindle 5ft

Please Note: This Item is located in Watford. The Fee for loading this item to a suitable vehicle by AIMS is £360. This charge will be added to your invoice. Please make prior arrangement with Mr Martin Riddell at AIMS on 01384 350 517 - Please Note this price does not include packing or strapping - this is at the responsibility of the buyer

The 3 jaw chuck shown on the box table is not included with this Lot.

Must be collected between the 9th - 17th December 2014

Meddings Bench Drill

Please Note: These Items are located in Watford

Grafton Bench Drill

Please Note: These Items are located in Watford

10’’ Double Ended Grinder

Please Note: These Items are located in Watford

Ax 4’’ Linisher

Please Note: These Items are located in Watford

Face Lapping Machine

Please Note: These Items are located in Watford

Selecta Double Ended Grinder

Please Note: These Items are located in Watford

Startrite 20 RF Vertical Bandsaw

Please Note: These Items are located in Watford

Ideal Blade Welder

Please Note: These Items are located in Watford

Wicksteed 10’’ Power Hacksaw

Please Note: These Items are located in Watford

Clarkson Tool & Gutter Grinder

Please Note: These Items are located in Watford

Migatronic Mig Welder

Please Note: These Items are located in Watford

Transmig 350 Mig Welding Set with TF6 Push Pull Feed Unit

Please Note: These Items are located in Watford

Welding Positioner Rotary Turn Table

Please Note: These Items are located in Watford

Rotary Welding Positioner

Please Note: These Items are located in Watford

Industrial Vac Air Industrial Vacuum Cleaner

Please Note: These Items are located in Watford

Makita Model 9306 5’’ Double Ended Bench Grinder. S/No. 16054E

Please Note: These Items are located in Watford

Claxton VSR Vibrating Stress Relieving Unit

Please Note: These Items are located in Watford

Yale 1-Ton Electric Hoist

Please Note: These Items are located in Watford

King 1-Ton Electric Hoist

Please Note: These Items are located in Watford

King 1-Ton Electric Hoist

Please Note: These Items are located in Watford

Felco 500kg Electric Hoist

Please Note: These Items are located in Watford

Black Bear 1-Ton Electric Hoist

Please Note: These Items are located in Watford

King 1.5-Ton Electric Hoist, Power from left to right

Please Note: These Items are located in Watford

Rand N3-150C-3T Equipment Compressor. S/No. 97248793 (2004)

Please Note: These Items are located in Watford

Qty Verniers

Please Note: These Items are located in Watford

Set of Metric Micrometers

Please Note: These Items are located in Watford

Qty Imperial Micrometers

Please Note: These Items are located in Watford

Qty Imperial Micrometers

Please Note: These Items are located in Watford

Qty Imperial Micrometers

Please Note: These Items are located in Watford

(2) Boxes of Metric Slip Gauges & (1) Box of Imperial Slip Gauges

Please Note: These Items are located in Watford

Qty Dial Bore Gauges

Please Note: These Items are located in Watford

Qty Depth Micrometers

Please Note: These Items are located in Watford

Qty Set Squares, Verniers, Parallels & Punches

Please Note: These Items are located in Watford

Qty Height Gauges, Clock Stands, Clock Gauges & Set of Bore Mics

Please Note: These Items are located in Watford

Qty Plug Gauges

Please Note: These Items are located in Watford

Machine Spirit Levels

Please Note: These Items are located in Watford

Steel Table; 4ft x 2ft with Height Gauge

Please Note: These Items are located in Watford

20” Rotary Table

Please Note: These Items are located in Watford

12” Rotary Table

Please Note: These Items are located in Watford

Swivel Table; 2ft x 12” & (2) Swivel Blocks – 9” x 12”

Please Note: These Items are located in Watford

10” Rotary Chuck

Please Note: These Items are located in Watford

10” Swivel Machine Vice

Please Note: These Items are located in Watford

6” Machine Vice

Please Note: These Items are located in Watford

8” Machine Vice

Please Note: These Items are located in Watford

5” Machine Vice

Please Note: These Items are located in Watford