Jones & Shipman 1011P Toolroom Surface Grinder, Capacity 27" x 12", Power Rise and Fall to Wheelhead with Wheel Dresser, 24" x 12" Magnetic Chuck, Coolant Tank & Halogen Light

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Jones & Shipman 1302 EIU Universal Cylindrical Grinder, 14" Max Dia Ground with New Wheel. 27" Grinding length between centres, 7" Height from table to centre. Wheelhead speeds 2000 & 2650 rpm, Workhead Speeds 40-320 rpm, Grinding Wheel 12" x 1" x 5". 3 & 4 Jaw chuck, Magnetic Chuck, 2 Point Steady, 2 Wheel Dressers

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Broadbent Schofield Gap Bed Centre Lathe, 32" Swing Over Bed. 52" Swing in Gap, 216"(18') Distance Between Centres, 4" Spindle Bore, Spindle Speeds 10.5 to 750rpm, 3 & 4 Jaw Chucks, 2 x Face Plates, Fixed and Travelling Steadies, Change Gears. S/No. 8467-70

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Viking VT630 Gap Bed Centre Lathe, 3000mm Between Centres, 630mm Swing over Bed, 400mm Swing over Cross Slide, 75mm Spindle Bore, Speeds 9-1600 rpm, Rapdis to Saddle, 3 & 4 Jaw Chucks, Quick Change Toolpost, 800mm Face Plate, 2 & 3 Point Steadies. 2 Axis Digital Readout (1998)

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Ward 7D Combination Turret Lathe, Swing Over Bed 16", Spindle Bore 5 1/4", Speeds 18 to 730rpm

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

POTISJE PA25 Gap Bed Centre Lathe, 10ft Between Centres , 21" Swing over Bed, 28" Swing in Gap, 12 1/4" Swing over Cross Slide, 3 1/2" Spindle Bore, Speeds 20 to 2000 rpm. 3 & 4 Jaw chuck, 2 & 3 Point Steadies, Face Plate & Quick Change Tool Post (1988)

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Labor Gap Bed Centre Lathe, 450mm Swing over bed, 650mm Swing in Gap, 2100mm Between Centres, 75mm Spindle Bore, 3 & 4 Jaw Chucks, Fixed & Travelling Steadies, Quick Change Toolpost

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Colchester Mascot 1600 Gap Bed Centre Lathe, 17" Swing over bed, 28" Swing in Gap, 80" Between Centres, 3" Spindle Bore, Speeds 20-1600rpm, Quick Change Toolpost, 3 Jaw Chuck

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

TOS SN 71C Gap Bed Centre Lathe, 800mm Swing Over Bed, 920mm Swing In Gap, 400mm Swing Over Cross Slide, 2000mm Distance Between Centres, 80mm Spindle Bore, 200mm 4 Jaw Chuck, Rapid Power to Saddle

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

XYZ Proturn 410 CNC Lathe with Proto Trak LX2 Control, 470mm Swing Over Bed, 730mm Swing In Gap, 290mm Swing Over Cross Slide, 1250mm Distance Between Centres, 80mm Spindle Bore, 50-2,500rpm Variable Spindle Speeds, 3 Jaw Chuck, Quick Change Tool Post and 3 Point Steady.

Please Note:- These Items are located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Emco Turn 140 CNC Lathe, Emcotronic T1 Control, 340mm Swing Over Bed, 158mm Swing Over Cross Slide, 300mm X & Y Traverse, 30mm Spindle Bore, Spindle Speeds 150-2500rpm

Please Note:- This Machine is for Spares or Repairs Only, Sold as is

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Imatec ID-175 Centre Lathe, 14" Swing over bed, 40" Between Centres, 1 5/8" Spindle Bore, Speeds 60 to 1600 rpm, Quick Change Toolpost

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Stanley Gap Bed Centre Lathe, Swing Over Bed 21", Swing in Gap 36", Distance Between Centres 60", Speeds 13 to 800rpm, Spindle Bore 3 1/2"

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Colchester Triumph 2000 Gap Bed Centre Lathe, 15" Swing over Bed, 9 1/2" Swing over Cross slide, 23" Swing in Gap, 50" Between Centres,  2 1/8" Spindle Bore, Speeds 25-2000 rpm,  Imperial leadscrew & Dials, Quick change Toolpost & Holders, 3 Jaw Chuck

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Dean Smith & Grace Type 13/1 Centre Lathe, 13 1/2" Swing over bed, 42" between centres, 1 1/2" Spindle Bore, Ex. College

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Ward 7DS Capstan Lathe, 2 1/4" Spindle Bore with Collet Chuck, 4 Way Toolpost,  Rear Toolpost,  Some Turret Tooling

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Herbert 4 Capstan Lathe, 2" Spindle Bore, Collet Chuck

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Ward 2DB Scholar Capstan Lathe, Collet Chuck, Dual Dials with Tooling

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Herbert 2D Capstan Lathe (Square Head), 13" Swing over Bed, 7 1/2" Swing over Cross Slide, 8" Max Turning Length, 1 1/2" Spindle Bore, Speeds 50-2550 rpm

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Colchester Triumph 7 1/2" Gap Bed Centre Lathe, 15" Swing Over Bed, 22" Swing in Gap, 30" Between Centres. 2" Spindle Bore, 2 & 3 Point Steadies. 3 Jaw Chuck, Quick Change Tool Post

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Colchester Student MK2 Gap Bed Centre Lathe, 13" Swing Over Bed, 25" Distance Between Centres, Quick Change Tool Post

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Colchester Chipmaster Variable Speed Centre Lathe, 11.1/4" Swing over bed. 20" Distance Between Centres, 1.3/8" Spindle Bore. Spindle Speeds: 35-3000rpm, Motor Size 3HP, 3 Jaw Chuck, Quick Change Toolpost, 2 & 3 Point Steadies

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Union Graduate Wood Turning Lathe, Swing over bed 12", Distance between centres 30" with Bowl Turning Attachment

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Kitchen & Wade 6' Radial Arm Drill, 5 Morse Taper Spindle, 3" Capacity, Speeds 16 to 750rpm

Please Note:- This machine is for Spares or Repair Only, Sold as is

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Asquith OD1 4ft 6" Radial Arm Drill, No.5 Morse Taper, 31-830 rpm Speeds, Feeds .0083/.012/.017/.027 ins/rev. Box Table 42" x 33" x 20", DC Brake

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

MAS VF4 5ft Radial Arm Drill with 5' Arm Length, 4 Morse Taper Spindle, Spindle Speeds upto 2000rpm, T-Slotted Box Table, Safety Insta Brake.

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Ajax TR40 type 1250 Hydrobloc Radial Arm Drill - Low Headroom, 4ft 6" Radius, No.4 Morse Taper Spindle, 40-1620 rpm Speeds, Box Table 24" x 20" x 20" (1995)

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Pollard 3' Radial Arm Drill with Rise & Fall T-Slotted Table, Table Size 36" x 29", 3 Morse Taper Spindle, 1" Capacity, Spindle Speeds 99 to 1210rpm, Power Feed to Spindle, Safety Brake.

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Mas Type VR2 Radial Arm Drill, 36" Capacity, 3 Morse Taper (1 1/4"), Speeds 90-4500 rpm. Box Table 21" x 16" x 16", Telescopic Brake, Coolant

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Huron NU4 Universal Milling Machine, 1435mm x 460mm Table Size, Omiversal Vertical Head, 40 Int, Spindle, 3 Axis Digital Readout, 100mm X Travel (Table) 700mm Y Travel (Head), Spindle Speeds 30 -2066 rpm (1982)

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Kearney & Trecker 415 S-15 No.4 Horizontal Mill, Powered Overarm, Double Swivel Head, Spindle 50 ISO, Speeds 25 to 2000rpm, Table Size 76" x 15", Maximum Distance from Table to Spindle Nose 29"

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Rambaudi MS3 Heavy Duty Turret Mill, 40 ISO Vertical Spindle, 50 ISO Horizontal Spindle, 1310 x 300 mm Table Size, Vertical Spindle Speeds 40-3500 rpm, Horizontal Spindle Speeds, 25 -1500 rpm. X Axis 950mm, Cross 270mm, Vetical 400mm, Power Feeds to Table All Ways, 200mm Riser Block

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Gate Heavy Duty Turret Mill, 50" x 12" Table, 33" X Traverse. 40 ISO Taper, Variable Speeds, Power to Table all ways, 2 Axis Digital Readout, Nikken Tool Set

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Bridgeport Series 1 Interact CNC Milling Machine, Table Size 34" x 12", Heidenhain TNC 145 Control, S/No. 18290584B

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Bridgeport Series 1 Interact CNC Milling Machine, Table Size 34" x 12", Heidenhain TNC 145 Control, S/No. 14830783B

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Elga Turret Milling Machine, Table Size 43" x 10", 40 INT Taper, Speeds 70 to 2300.

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

MAS Vertical Milling Machine, Table Size 52" x 12", 50 INT Taper, Speeds 40 to 1600rpm.

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Bridgeport Turret Milling Machine. 42" x 9" Table, Power feed in X. 1 1/2HP Variable Speed Head, R8 Spindle, Speeds 50-3000 rpm, 2 Axis Digital Readout, Coolant.

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Adcock & Shipley Type 2S Universal Milling Machine, Table Size 54" x 12", Speeds 30 to 1500rpm.

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

TOS FNK 25A Turret Milling Machine, Table Size: 49" x 11.1/2", Spindle 40 ISO. Speeds: 56-4500rpm.

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Stanko Import Model 6P81W Universal Milling Machine, Table Size 43" x 10", Universal Vertical Head on Overarm, 40 INT Taper, Speeds 50 to 1000 Horizontal, Speeds 45 to 2000 Vertical.

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Bridgeport 1S Universal Milling Machine, 40 ISO Spindle Taper, Speeds 35-1200 rpm, 42" x 9"Table, Table Travel X 23 5/8" Y 8 1/4" & Z 15 3/4" Swivel Table, Swivel Vertical Head 40 ISO, Horizontal Arbor Support

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Bridgeport 1S Universal Milling Machine, 40 ISO Spindle Taper, Speeds 35-1200 rpm. 42" x 9"Table, Table Travel X 23 5/8" Y 8 1/4" & Z 15 3/4" Swivel Table, Swivel Vertical Head 40 ISO, Horizontal Arbor Support

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

KRV 3000 Turret Milling Machine with Table Size 48" x 12", 40 IOS Spindle Variable Speed, Power Feed X Axis and Rapid Traverse to Table (1996)

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Ajax Model UP Universal Mill with Spindle 40 ISO, Speeds 48-1500rpm, Double Swivel Head, Table Size 1100mm x 240mm

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Pollard Single Spindle Pedestal Drill with 24" x 24" Table, 14" Throat

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Elliott Progress Type 3A HD Pedestal Drill, 'T' Slotted 19" x 15" Table, 3 Morse Taper (1 1/8"), Power Feed, Speeds 70-1180 rpm, Rise, Fall & Swivelling Table.

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Meddings Drill Tru Pillar Drill, 1/2" Capacity Drill Chuck, 5 Speeds: 500-4000rpm, 3 Phase, 1/3 HP Motor.

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Edgewick Vertical Keyseater, Table Size 34" x 9".

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Mosen Horizontal Bandsaw with 240mm Round Capacity

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Startrite Type Meba SM325 Horizontal Bandsaw, 12" Round Capacity.

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Eisele Model LMS 2 Pull Down Aluminium Cut Off Saw, Double Mitre, Blade Size: 350mm Diameter.

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

FOM Type Blitz 1 Twin Head Extrusion Saw with 4050mm Capacity, Tilting on Both Heads

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Butler 12" Precision Toolroom Slotter, Stroke 2" - 12", Cycles Per Minute 19, 30, 45 & 75, Cutting Speeds 15 - 68 Feet Per Minute, Table Size 24" Diameter, Throat 24", Daylight 15", Power Feeds to Table, Indexing on Table, Tilting Ram.

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Pearson Hydraulic Power Guillotine, Capacity 3048mm x 10mm Power Back Guage

Please Note:- This Machine needs attention to backgauge as some parts are missing

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Pells Type ASG-8 Shearing & Nibbling Machine, 1400mm Throat, 8mm Max Capacity

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Morgan Powered Mechanical Guillotine with 48" x 14swg Capacity, 102 Strokes Per Minute

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Haddon Type H70/100 Spot Welder with 100 KVA Capacity, Throat Gap 166 to 460mm. British Federal Control, Type S5SW/1 Solid State Precision Control

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Sunderland 5A Gear Planer with Micro Process Control, Full C E Guarding, Spur Gears 12" Diameter, 4" Face, 5DP Modual 5, Spiral 60 Degrees, 5/8" CP Normal Pitch (Rebuilt 2004)

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Snow OS24 Horizontal Spindle Surface Grinder with Capacity 600mm x 200mm, Vertical Movement 200mm, Intermittent Wheelhead, Automatic Cross Feed

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.