Bridgeport Interact 1020X Vertical Machining Centre. Heidenhain 2500 Control. BT40 Spindle. 20 ATC. Table Travel 1000mm x 410mm. Spindle Travel 480mm, 7.5KW Motor. Facility for 4th Axis. Serial Number: 90030 (1991)

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Harrison HS450 CNC Lathe with G E Fanuc Control. 440mm Swing over Bed. 1000mm Distance Between Centres. 82mm Spindle Bore. 8 Station Diplomatic Indexing Toolpost. 250mm 3 Jaw Chuck. Drive Plate. BSV-N 160-8/21 110/50.

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Hitachi Seiki Type 4NE CNC Lathe with Fanuc System 6T Control, CAD/CAM System, 400mm Swing over Bed, 750mm Distance between Centres, 12 Station Turret, 3-Jaw Chuck & Tailstock

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Bridgeport Ezpath CNC Centre Lathe with Bridgeport ezpath Control. 18" Swing over Bed. 42" Distance Between Centres. 2" Spindle Bore. 3 Jaw Chuck (1997)

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Please Note:- This Lot is for Spares or Repairs Only

Webster & Benett 36" EV Vertical Boring Machine, 42" Table Size. 52" Maximum Swing. 40" Daylight. 13.5 to 300 rpm. 2 Axis DRO.

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Union Type BFT80 Horizontal Boring Machine with Spindle Diameter 3 5/32", Speeds: 180 to 1000rpm, Facing Head: 19 11/16", Facing Head Speeds: 2.8 to 125rpm, Table Size: 37" x 44", Long Traverse: 49", Cross Traverse: 39", Vertical Traverse: 35", Power to Table, 360 Degree Rotating Table & Tailstock

Please Note: There is no screw in the Tailstock

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Broadbent Schofield Gap Bed Centre Lathe, 32" Swing Over Bed, 52" Swing in Gap, 216"(18') Distance Between Centres, 4" Spindle Bore, Spindle Speeds: 10.5 to 750rpm, 3 & 4 Jaw Chucks, (2) Face Plates. Fixed and Travelling Steadies, Change Gears, S/No. 8467-70

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Newall Type 2443 Vertical Jig Boring Machine, Table Size: 42" x 24", Auxillary Table, Milling to Spindle, with Tooling

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Stanley Gap Bed Centre Lathe, 6' Between Centres, 21.1/2" Swing Over Bed, 37" Swing in Gap, 3.1/2" Spindle Bore, Spindle Speeds:13-400rpm, 20" 4 Jaw Chuck, 20" & 36" Face Plates, 3 Point Steady.

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

TOS Type SN 71C Gap Bed Centre Lathe, 800mm Swing Over Bed, 920mm Swing In Gap, 400mm Swing Over Cross Slide, 2000mm Distance Between Centres, 80mm Spindle Bore, 200mm 4-Jaw Chuck, Rapid Power to Saddle.

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Dean Smith Grace Type 1709 x 60 Gap Bed Centre Lathe. 17" Swing over bed. 24" Swing in gap. 60" Distance Between Centres. 3" Spindle Bore. Spindle Speeds 8 - 900rpm. Dual Dials. Power Drilling Attachment.

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Emco Turn 140 CNC Lathe. Emcotronic T1 Control. 340mm Swing Over Bed. 158mm Swing Over Cross Slide. 300mm X & Y Traverse. 30mm Spindle Bore. Spindle Speeds: 150-2500rpm.

Please Note:- This Lot is for Spares & Repairs Only

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

XYZ 1330 Gap Bed Centre Lathe, 13" Swing over bed. 8" Swing over Cross Slide, 18" Swing in gap. 30" Distance Between Centres, 1.3/8" Spindle Bore, Spindle Speeds 53 - 2000rpm, Metric Leadscrew & Dials, 3 & 4 Jaw Chucks, Quick Change Tool Post and Tool Holders

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Colchester Chipmaster Variable Speed Centre Lathe, 11.1/4" Swing over bed. 20" Distance Between Centres. 1.3/8" Spindle Bore. Spindle Speeds: 35-3000rpm. Motor Size 3HP. 3 Jaw Chuck. Quick Change Toolpost. 2 & 3 Point Steadies.

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Bridgeport Interact Series 1 CNC Milling Machine with Heidenhain TNC 151 Control, Table Size: 860mm x 320mm

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Bridgeport Type BR2J Turret Milling Machine, Variable Speed Head, 42" x 9" Table Size, Power Feed to Table

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Bridgeport Type BR2J Turret Milling Machine, Variable Speed Head. 48" x 9" Table Size

Please Note: This Machine is for Spares & Repairs Only

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Elliott Model 02 Universal Turret Mill with 40 ISO Horizontal Spindle, 30 ISO Vertical Spindle, Swivel Table Size: 45" x 11.1/2", Vertical Spindle Speeds: 80-2700rpm, Horizontal Spindle Speeds: 31-1010rpm, Swivel Vertical Head with Power Feed, Power Feed to Table.

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Mas Vertical Mill, Table Size 53" x 11.1/2". 50 ISO Spindle Taper, Power Feed to Table on X Axis, Power Feed to Knee, Spindle Speeds 40 - 1250rpm.

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Tos FNK 25A Turret Milling Machine, Table Size: 49" x 11.1/2", Spindle 40 ISO, Speeds: 56-4500 rpm                

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Archdale Heavy Duty 5 MT Drill, Capacity 3", Speeds 60-1500 rpm, Table Size 18" x 16" Throat 15", Power Feed

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Arboga Drill Mill Table Size 20" x 10", 3 Morse Taper, Rise and Fall Column, Speeds: 100-900 rpm

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Herbert Power Hacksaw with 12" Maximum Cutting Diameter, 45 Degree Swivel Vice

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Startrite 316H Vertical Bandsaw, Throat 36", Daylight 13", Power Feed on Table, Blade Welder & Grinder

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Startrite 18-T-10 Vertical Bandsaw with 19" x 19" Table Size, 18" Throat,  8" Daylight, Tilt & Split Table

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Promecam Model RG-103 Hydraulic Upstroking Press Brake, Capacity 3000mm x 100 Ton, Distance Between Frames 2600mm, Throat Length 400mm, Stroke Length 100mm, Smartscan Lightguards

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Kinghorn 120-Ton Mechanical Punching Press, Table Size: 96" x 24", Adjustable Stroke: 1" to 4", 120-Ton at bottom of Stroke with Air Clutch & Light Guards

Please Note: - If using this machine with Redman type Unit Tooling then the Striker Bars often remain in vertcial contact with tooling, eliminating the necessity for Light Guards

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Edwards Type DD Power Guillotine, Capacity: 2000mm x 3.25mm with Front Supports.

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Ryburn Model Dynaflex 30-4D 30" Horizontal Lapping Machine, 3 x Work Rings 14" Outside Dia, 310mm Internal Dia, Kemet Electronic Fluid Dispenser

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Lapmaster 24" Capacity Horizontal Lapping Machine, 2 x Work Rings: 11.1/4" Outside Diameter, 9.3/4" Internal Diameter, Kemet Electronic Fluid Dispenser.

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Lapmaster: 24" Capacity Horizontal Lapping Machine

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Hahn & Kolb Two Wheel Double Sided Fine Grinding Machine, 30" Dia Grinding Wheels

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Hauser Type OP3 Vertical Jig Boring Machine, Variable Spindle Speed: 60-3000rpm. Table Size: 23" x 23". 13" Throat. 24" Daylight. 2 Morse Taper Spindle. Microscope Attachment. Travel: X-400mm, Y-250mm, Z-400mm

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Marbaix Type M-84AS Tap Disintegrator, Table Size: 24" x 24"

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Meddings Double Ended Tilting Table Tool Lapper

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Union Jubilee Double Ended Pedestal Grinder

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Black & Decker Double Ended Pedestal Grinder

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Grimston Double Ended Pedestal Grinder, 8" Diameter

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Grimston Double Ended Pedestal Grinder, 8" Diameter

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Laycock Model LX Air Compressor, Capacity: 15. S.A.E: 30.

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Air Master Model AM45EF250 Compressor, Max Working Pressure 150psi, S.A.E: 30. Air Receiver Capacity 250Ltr's

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Arboga Type G2508 Pillar Drill, 3 Morse Taper Spindle, 100-2900rpm Spindle Speeds, Rise & Fall Tilting Table

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Meddings Drill Tru Pillar Drill

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Clarke Model CDP16FCN Bench Drill on Stand, 2 Morse Taper, 5/8" Capacity Drill Chuck, 16 Speeds: 180-2700rpm, Single Phase

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Brierley Type ZB25 Drill Grinder with 1.5 - 25mm Capacity, 40 to 80 Degree's Point Angles, Variable Clearances, Self Centring 3 Jaw Chuck.

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Rdm Model 100A Bench Drill, Morse Taper Spindle, 5 Speeds: 390-2050rpm, Single Phase.

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Bodmer Type MXH300/200 Precision Tool Setter, 2 Axis Heidenhain DRO.

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Rileys Crane Services, Large A Frame Lifting Gantry, Height 5600mm, Width 8100mm, Capacity 2 Ton

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Lifting Gantry with 1 Ton Capacity, 1 Ton Lifting Block, Width 3000mm, Height 4000mm

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

F.G.Wilson Model DC10W Mobile Generator, Thrige-Scott Ltd 10KW Motor, Trip Alerts, Voltage Adjustment, Speed Adjustment.

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

BIX Gladiator Omni Coater (2005)

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Fronius Type Transtig 2600, 260 AMP, S/No. 0728944

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Nexus NXM300 Mig Welder with Cobramatic Feeder.

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Migatronic Type KDO 500 Mig Welding Set, 500 AMP

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Tylarc Type 453 Mobile Arc Welder, 450 AMP

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Thermal Arc Fabricator 400 CV DC Arc Welder

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Westmig Type 300S Mig Welding Set, 300 AMP with West Mach Wire Feed Unit

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Graul Kruba Type AS-P 550 Profile Notching Saw, For Plastics and Aluminium, Vertical Cutting Depth 210/245mm, Horizontal Notching Depth 190mm Max, Swivel Range 22.5 Degrees Left & Right, Table Stroke 260mm Left & 380mm Right, Table Depth 115mm, Sawblade Diameters 550mm Vertical & 500mm Horizontal, Sawblade Speed 3300rpm, Saw Feed Stroke 830mm Max (2004)

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Biesse Type Rover 13 CNC Routing Machine (For Plastic & Aluminium) Spindle Speed 18000rpm max, Working Field: X Axis 1840mm / Y Axis 940mm (1996)

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Emmegi Type Classic EX POTU/5 Twin Head Extrusion Saw with Emmegi Control, Tilting on Both Heads, 5500mm Capacity, 400mm Blade Diameter, 2.2KW Motor (1995)

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.