Kinghorn 120-Ton Punching & Flattening Machine, Table Size: 96" x 24" Tee Slotted. S/No. 90/5679

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Wilkins & Mitchell Mechanical Power Press, Table Size 84" x 30" (Tee Slotted), Fly Wheel Speed 300 rpm, Air Clutch

Please Note: These Items are located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Hammerle Hydraulic Press Brake, 3000mm x 175 Ton

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Nissan Fork Lift Truck with 1.5 Ton Capacity, Gas Powered with Short Mast

Please Note: - This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Fielding & Platt Ltd Hydraulic Horizontal Press with 100-Ton Capacity, Ram Size 10" Dia, Platen size 48" x 46"

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Edwards " Jaws V" Hydraulic Iron Worker with 65-Ton Cap, Flats 24" x 3/8’’, Punches 1 1/16 dia hole in 3/4" Plate, Notching 2 1/2" x 6" x 3/8"

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Ryburn Model Dynaflex 30-4D 30" Horizontal Lapping Machine with Kemet Electronic Fluid Dispenser

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Lapmaster 24" Capacity Horizontal Lapping Machine

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Mecrode Minim Solid Sink Spark Eroder, 17 1/2" Wide x 31" Long x 11" Deep.

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Marbaix Model M-84AS Tap Disintegrator, Capacity 1 – 8mm. Table Size 23” x 23”, Distance from Head to Table 27”

Please Note:- This lot is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Richmond SR2 Radial Arm Drill, 48" Radius of Arm, 44" Throat, 45" Base to Spindle Nose, No.3 Morse Taper Spindle, Spindle Speeds 150-750rpm, 7" Spindle Depth, Table Size: 36" x 24", Rise & Fall Table, Power Feed to Spindle, Forward & Reverse Spindle, Coolant.

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Archdale Heavy Duty 5 MT Drill with 3"Capacity, Speeds 60-1500 rpm, Table Size 18" x 16", Throat 15" and Power Feed

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Tos Type VS32A Heavy Duty Pillar Drill with No.4 Morse Taper Spindle, 2" Drilling Capacity, Table Size: 400mm x 315mm, Speeds 56-2240rpm and Power Feed

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Startrite H225 Horizontal Bandsaw with 225mm (9") Capacity

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Forte Horizontal Bandsaw 10" (250mm) Capacity

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Startrite 316H Vertical Bandsaw, Throat 36". Daylight 13", Power Feed on Table, Blade Welder & Grinder.

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Startrite 20 RWF Vertical Bandsaw with Table size 20" x 20", Throat 20". Blade speeds 56 - 3200 fpm, Sliding Table, Blade Welder

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Startrite 18-T-10 Vertical Bandsaw with Table Size: 19" x 19", Throat: 18". Daylight: 8", Tilting & Split Table

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Universal Saw Services Ltd Pull Down Cut Off Saw with 12" Diameter Blade, Double Mitre.

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Bianco MOD 270 Horizontal Bandsaw with 9ft In-Feed Roller Track 3ft Out-Feed Tray Truck Model M60 S/No. 778-4-95

Please Note:- This Item is located in Dorset

FOM Blitz Semi Automatic (NonFerrous) Double Mitre Saw, Max. Cut Length at 90degrees 4m, Cutting Capacity at 90degrees 280mm x 90mm, 450mm Blade Diameter, Pneumatic Clamping

Please Note: This Item is located in Birmingham and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Cincinnati No.2 Universal Milling Machine with Dividing Head, Change Gears for Rack Milling. Power Take off

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Milwaukee Model D No.2 Rotary Head Milling Machine with Table 36" x 16"

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Parson No.2V Vertical Mill with Swivel Head. Spindle Taper 50 Int. Table Size 50’’ x 12’’, Speeds 27 - 1500rpm

Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser

Ajax Vertical Milling Machine Table Size 60’’ x 12’’

Please Note:- This Item is located in Dorset