Union Bft 80/2 Horizontal Boring Facing & Milling Machine, 80mm Spindle Dia. 500mm Facing Head. 1125mm x 1000mm Table Size

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Herbert Type 28A Vertical Milling Machine. 28" x 85" Table, 62" Long Travel, 28 1/2" Cross Traverse. 30 1/2 " Max Spindle Nose to Table, Throat 26 3/4", Spindle Nose Dia. 5 1/16". Spindle Taper 50 ISO. 960 rpm 16 x Spindle Speeds 12 - 360 rpm, 1430 rpm 16 x Spindle Speeds 18 - 540 rpm.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

DS&G Type 21 x 96 Gap Bed Centre Lathe. 22" Swing over bed, 35" Swing in gap. 96" Between Centres and 3 1/2" Spindle Bore. S/No. 35571-1-65

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Mostano Type 1M63HT3. Gap Bed Centre Lathe. 27" Swing over bed, 36" Swing in gap, 10ft between centres, 4 1/4" Spindle Bore, 15" 4 Jaw Chuck, 3 Point steady (1996)

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Fielding & Platt Ltd Hydraulic Horizontal Press, Capacity 100 Ton, Ram Size 10" Dia. Platen size 48" x 46"

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Haco Type 3HBR176A 3 Roll Double Pinch Bending Rolls, 1750mm Length of Roll, 6mm Bending Cap. 150mm Dia of Rolls. Hardened Rolls 50-55 HRC. Hydraulic Conical Bending, Hydraulic Drop End, Hydraulic Side Positioning Readouts, Hydraulic Overload Protection System with Wire Safety System. (2007)

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Kingsland Type SST 3006 Hydraulic Power Guillotine. Capacity 3000mm x 6mm with Power Back Gauge.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Edwards " Jaws V" Hydraulic Iron Worker, 65 Ton Cap, Flats 24" x 3/8" or 14" x 1/2". Angles 5" x 5" x 1/4" or 4" x 4" x 3/8" Punches 1 1/16 dia hole in 3/4" Plate. Notching 2 1/2" x 6" x 3/8".

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Edwards 35 Ton Mechanical Iron Worker, Cap Angle & Tee 3" x 1/4", Cropping Round 1 3/16", Square 1", Punching 7/8" Dia x 3/8" or 11/16" dia x 7/16". Notching 5/16" Thickness with Motor 2 HP.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Barnes Pyramid Bending Rolls. Capacity 48" x 1/8". Size of Rolls 48" x 5" Top & 4" Bottom.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Rosler Type R125 EC Vibrating parts DeBurrer. (1997)

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Pullmax Type P5/2 Nibbling Machine, Throat 40" with Tooling.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Lifting Gantry. 1 Ton Capacity with 1 Ton Lifting Block, Width 3000mm. Height 4000mm.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Colchester Mascot 1600 Gap Bed Centre Lathe. 17" Swing over bed, 28" Swing in gap, 100" Between Centres, 3" Spindle bore, Speeds 20 - 1600 rpm.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Colchester Triumph 2000 Gap Bed Centre Lathe. 15" Swing over bed, 23" Swing in gap, 50" Between Centres, 2" Spindle bore, Speeds 25 - 2000 rpm.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Colchester Master 2500 Gap Bed Centre Lathe. 13" Swing over Bed, 19" Swing in Gap, 40" Between Centres, Speeds 30 to 2500 rpm, Spindle Bore 1 5/8" with Ainjest High Speeds Threading.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Hardinge Type DSM 59 Capstan Lathe with Variable Speeds

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Harrison M300 Gap Bed Centre Lathe. 330mm Swing over bed, 480mm Swing in gap, 1000mm Between Centres, 38mm Spindle bore, Speeds 40 - 2500 rpm.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Churchill HB Toolroom Surface Grinder. Capacity 18" x 6" with 10" x 5" Magnetic Chuck.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Richmond Type SR3 36" Radial Arm Drill. 3 Morse Taper. Speeds 50 - 1500 rpm with Rise & Fall Table.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Milltech Type 5000 VS Turret Milling Machine. Variable Speed Head, 40 Int Speeds, Speeds 60 to 3600 rpm, Table 1500mm x 300mm, Long Traverse 1200 rpm with Newall D.R.O.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Bridgeport Type BR2J Turret Milling Machine, Table Size 42" x 9", Vari Speed Head, 50 - 3750, Power Feed to Table with 2 Axis D.R.O.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Bridgeport Model BRJ Turret Milling Machine, Table Size 48" x 9" Spindle Taper R8 with Spindle speeds 67-4600 rpm.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Semco LC-165VS Turret Mill, Table Size 48" x 10", Spindle Taper 40 ISO, Spindle Speeds 50-3750 rpm, Mitutoyo 2 Axis D.R.O, Power Draw Bar (1988)

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Denbigh Type D4 Horizontal Milling Machine. Table Size 45" x 10". Spindle Speeds 19 - 720 rpm.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Boge Type S10 Rotary Screw Compressor, Rate of Flow 1.18m3/min, Max Pressure 8 bar, Motor 3000 min-1 with Motor Power 7.5 KW (1999)

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Fiuidair Rpk Rotary Screw Compressor, Working Pressure 115 PSI 8 Bar with Fluidair Rotastar Control.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

A. Knovenagel Double Disc Sander. Wheel Dia 1150mm, Rise & Fall & Tilting Table, Table Size 1200 x 345mm and Motor Size 5.5 KW

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Scortegagna Type AM270 Automatic Horizonal Bandsaw. Capacity 270mm

Please Note: This Machine is in need of attention, sold as is

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Accu-Cut Horizontal Bandsaw, Capacity 350mm Round with Swivel Vice & Bar Stand.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Startrite Meba SM250 Horizontal Bandsaw, Capacity 250mm Round, Blade Speeds 46 - 230 fpm Variable with Swivel Vice.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Startrite H250W Horizontal Bandsaw. Capacity 250mm Round. Blade Speeds 50 - 300 fpm with Swivel Vice.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Macc Model 315 Pull Down Circular Saw, Blade Size 315mm, 2 Speed Motor 1.5 & 2.2 kW with Swivel Vice.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Still Type EFG 1.5/500 (R50) Electric Fork Lift Truck. Capacity 1500 kg.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Crown Model BS54 Electric Pedestrian Pallet Truck, Cap 1500 lbs, Lift Height 54", Load Centre 20", Fork Length 36".

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Rileys Crane Services Large A Frame Lifting Gantry, Height 5600mm, Width 8100mm and Capacity 2 Ton

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Rileys Crane Services. Swing Beam Lifting Gantry, Arm Length 4000mm, Capacity 1 Ton with Demag 1 Ton Electric Hoist

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Fork Lift Tipper Skip. Size on top 64" x 50", Depth 31"

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Fork Lift Tipper Skip Size at Top 50" x 50". Depth 25"

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Guyson Jetstream Shot Blast Cabinet. (Approx) Internal Size 24" x 12" x 18" High with Extraction Unit.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Pollard Corona 12AX High Speed Pedestal Drill. Table Size 300mm x 250mm, 3 Spindle Speeds 1900/3340/6050 rpm, Chuck Size 8mm.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Startrite Mercury Mk2 Bench Drill on Stand. 1/2" Chuck. Speeds 530 - 3830rpm. 3 Phase Electric. 1/2 HP.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Union Bench Drill on Stand. Spindle speeds 620 to 3240 rpm, 1 Morse Taper Spindle.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

G.H. Alexander Engraving Machine. Main Table 450 x 320mm, Copy Table 350 x 200mm, Speeds 475 - 9500 rpm, Imperial Dial, Motor. 0.5 Hp 3 Phase.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Ksn Two Stage Tunnel Washing Machine for Degreasing & Drying Rotors, Powered Conveyor Size 5in x 5in x 72in length Plus Loading Conveyor Size 9ft Length. S/No. KSN 4698 (1995)

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

IDP Tool Lapping Machine on Integral Tool Cabinet with Low Volt Light.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

RJH Tool Lapper with Tilting Table on Steel Stand.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Dormer Model 108 Drill Grinder.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

RJH Bison Double Ended Pedestal Grinder, Wheel Size 250 x 25 x 20mm, Motor 1 HP.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Lumsden Double Ended Pedestal Grinder, Wheel Capacity 8".

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Wolf 8'' Double Ended Tool Grinder Type 4218, Wheels 200mm x 25mm, Motor Size 0.60 HP. 3 Phase Electrics.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Oldak Type ED Bench Tapper on Stand, 1/4" Chuck, Single Phase.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Hydrovane Type 23 PU Rotary Air Compressor, Motor 5.5 Hp. 4 Kw. CFM 21.5.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Fiac Model E3HP-150S Garage Type Compressor, Safe Working Pressure, 10 Bar/145 psi, Single Phase Motor 2.2 KW with Air Receiver Size 150 Litre.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Clarke Air Industrial Garage Type Compressor. Max Working Pressure 150 psi. Three Phase Motor 1.5 KW with Air Receiver Size 100 Litre.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Ashworth Type 311/1 Weighing Machine, Max Weigh 1 cwt, Table Size 12" x 16", Face Size 20" Dia.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Spitfire XK2000 Mobile Welder/Generator, Welding Cap. 200amp.s, Generator Capacity 7 KVA. 110V/ 3.75 KW. 240V/6 Kw, Engine Honda GX390 13.0

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Cutlass Fasteners Model Cobra Stud Welder. Cap 3-13mm with Stud Gun & Leads.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Boc Adr 300 Argonarch ac/dc Welder, capacity 300 amp Max with DC Suppressor Unit & Leads.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser

Fromig Type Fro 500 SCR Mig Welding Set, Cap 500 amp with F120G Wire Feed Unit.

Please Note : This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking & securing however will be at the cost of the purchaser