Kingsland Model FRM 43200 - 200Ton x 4300mm Over Bed Downstroke Hydraulic CNC Press Brake admit 3750mm b/frames.With BC40 - 3 axis programmable control ( x,y1, y2 ). Machine mounted operators guards,side fences. Full length top tool, assorted segemented bottom tooling. Foot pedal. S/No.80414 (1995)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Edwards Pearson Model PR 60/25 – 60 Ton x 2550 mm, Over Bed Hydraulic Downstroke CNC Press Brake. Admit 2050mm between frames. Cybelec DNC800 Cnc control ( Y1, Y2, X, R, Z1 & Z2.) Hydraulic top tool clamping. Hydraulic Compensation in Lowerd Bed.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Durma HAP3080, 80 Ton x 3050 mm, Over bed downstroke hydraulic press brake. Admit 2550 mm between side frames. ELGO 2 axis positional control (x,y). Full length multi vee die block 80mm square, full length gooseneck top tooling. Sick machine mounted operator guards, side and rear fences, foot pedal control. S/No. 7033981962 (1998)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Carter (Chinese) WG67Y - 40t x 1320mm Over Bed Downstroke Press Brake admit 950mm b/frames fitted with Estun programmable control for back gauge. Machine mounted guards, foot pedal, top and bottom tooling. Mach No.W2010-025 (2010)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

K & B Donewell 15-1300 , 15ton x 1300mm Over Bed Downstroke Hydraulic Press Brake, admit 1030mm b/frames. Manual front operated back gauge. Smartscan machine mounted operators guards, side and rear fences, multi vee die block and top tooling S/No.17905 1415 (1979)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Pearson TX 3048mm x 10mm Hydraulic Swing Beam Guillotine Shear, power operated back gauge, manual blade gap adj, squaring arm, front supports. S/No.696406/9

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Sagita Manrhin 3050 x 6mm Hydraulic Swing Beam Guillotine Shear, power operated back gauge, manual blad gap adj, 2 speed machine, squaring arm and front supports, foot pedal.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Cidan MS-R 3135 3100 x 3.5mm Direct Drive Mechanical Guillotine Shear, power operated programmable b/gauge (Elgo type 71 control), rear sheet support, squaring arm & front supports. Foot pedal. S/No.12116 (1997)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

ELGA 2500 x 3.5mm Hydraulic Swing Beam Guillotine Shear, power operated back gauge, squaring arm front supports, foot pedal. Rear pneumatic sheet support. S/No.81871741 (1971)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Morgan SC 2500 x 4mm Mechanical Under Driven Guillotine Shear, manual back gauge, squaring arm,front supports, foot pedal. S/No.1155MW/85GAY (1985)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Press & Shear 1250 x 1.6mm Mechanical Direct Drive Guillotine Shear, front supports. Foot pedal. No b/gauge

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Davi 3050 mm x 8 mm, Three roll, hydraulic, double initial pinch plate bending rolls. Top roll diameter 245 mm. Rolling only capacity 10 mm. Hydraulic adjustment to both side bending rolls, hydraulic counter balance and drop end.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Ducci CL 0530 - 3000mm x 5mm Pyramid Plate Bending Rolls. Dia of top roll 200mm. Power adjustment top roll. Hydraulic counterbalance top roll, and operation of drop end. Serial No. CL0530-M-525.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Forte SBA401, 400 mm rounds Twin Pillar Automatic Horizontal Bandsaw, Maximum cut length by single feed stroke 600 mm, double feed stroke 1200 mm. Coolant. S/No 722301.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

IMET 280/60, 230 mm rounds, Horizontal One Way Mitre Cutting Bandsaw, Rectangles at 90 degrees 280 x 150 mm. Cap @ 45 degrees 200 mm rounds, 200 x 100 mm rect. Option of hand feed and cut, gravity feed with damper control

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Startrite Harwi Model 2150G Wall Saw, Capacity 2100 x 5000 mm wide.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Addison CB250A, 250 mm rounds Automatic, Straight Cutting, Horizontal Bandsaw, Squares 240 mm, bundles 203 x 152 mm, bundle clamps, coolant (1994)

Please Note: This Item is in need of attention, sold as is

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Uzay USM280 280mm Rounds Manual Horizontal Bandsaw, Capacities at 90 degrees 260mm squares, rectangles 370 x 200mm, 438 x 63mm with Swivel Vice for Mitre Cutting, Coolant and Length Stop (1997)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Kaltenbach KKS400NA 400mm Dia Blade Upcutting Cold Saw with MINI POS 807 NC Length Preselection, Capacities with 400 mm blade, at 90 degrees, 130 mm rounds, 120 mm squares, 315 x 40 mm flats, 240 x 85 mm channels. At 45 degrees 180 x 70 mm channels, channels on edge 120 x 55 mm. With coolant, roller track with length stop. S/No.107 094 (1994)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Eisele VMS PV 300mm Blade Vertical Guided Head Semi-Automatic Mitre Cutting Cold Saw, Cap at 90 deg -100mm rounds, 160 x 80mm rect & at 45 deg 100mm rounds, 80 x 80mm rect, pneumatic material clamping, coolant. S/No.6025 (1981)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Adige M275, 275 mm diameter Blade, Guided Column, Pull Down Circular Cold Saw, Capacities at 90 degrees, 90 mm rounds, 80 mm squares, 100 x 70 mm rectangles. At 45 degrees 80 x 60 mm rectangles. Length stop, coolant.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

MC 350, 35 X 2 mm Capacity Mild Steel, Mandrel Tube Bender with hydraulic clamping, hydraulic mandrel retraction. Maximum tube length over mandrel 3000 mm. 12 different stops can be placed on the automatic turret, from which bends up to 180 degrees can be selected. With 35 mm former, pendant control. S/No 201.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

CBC UNI60A1 - 48.3 x 3mm ( 1.1/2" Gas) Draw Type Tube Bending Machine with panel. Max bending angle 180 deg, 50 bending programmes, material table with stops for length/plane of bend. Assorted tooling as available incl 1", 1.1/4", 1.1/2" formers. Foot pedal. S/No.0405 (1996)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Keetona 100" x 1/8" (2540mm x 3mm), Hydroform Universal Bending and Folding Machine. Pro rata capacity 1016 x 6mm. Full length segmented tooling. S/No.HUF818695 (1978)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Frost Model 374, 2440 mm x 6 mm (8’ x ¼”), Power Operated Mechanical Driven Straight Folding Machine, Power rise & fall of top beam, power clamp and fold. S/No 2972 (1970)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Carter (Chinese) 3000 x 2mm Hand Operated Box & Pan Folding Machine, full length segmented tooling, counterbalance weights (2012)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Edwards 1050 mm x 1.6 mm, Hand operated straight folding machine. S/No 71C/33812.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Kingsland 115XS, 115 Ton, Hydraulic Universal Steelworker, Capacities 150 x 150 x 18 mm angles, punching 34 x 26 mm, 55 x 16 mm, flat shear 380 x 25 mm, 600 x 15 mm, 55 mm rounds/squares, notching 100 x 60 x 13 mm. Double foot pedal operation (1996)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Kingsland Multi 60 - 60ton Hydraulic Universal Steelworker. 130 x 130 x 13mm ms angles @ 90 deg , punching 29 x 15mm or 75mm x 8mm pro-rata, shear flats 230 x 20mm or 375 x 10mm pr0-rata, crop 45mm round/squares. Notch 90 x 45 x 10mm . Double foot pedal , length stop, S/no.377804 (2004)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Kingsland Model 60P625 - 60Ton x 625mm Throat Triple Head Hydraulic Punching Machine with 4m - 2 axis linear rail guaging feed table with K210 control. X axis 3000mm, Y axis 500mm. Max punch cap with one head 29mm thro 15mm, 57mm thro 8mm dependent on tooling. With tooling as fitted. Suitable for punching plates, flats, and web of channels (requires ext punches), and channel flanges/I Beams (2005)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Kingsland 85DPX, 85 Ton, Hydraulic Double Ended Double Ended Punching Machine, Maximum capacities 33 x 20 mm, 55 x 12 mm. Throat depth 625 mm and 355 mm. Independent control of both ends by remote foot pedals. Power inching system for tool setting. S/No 704795 (1995)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Nargesa MX340G Universal Hydraulic Punching & Notching Machine, Throat depth 180mm, table 245 x 265mm, Fitted with 100 x 100 x 4mm Corner Notch Unit, Other tooling incl die block, punches & dies. Foot pedal (2006)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Geka PP50T, 50 Ton, Hydraulic single ended punching machine, Capacity 27 x 13 mm, 40 x 9 mm,. Tee slotted table take sunit tooling with standard gooseneck punching adaptor, stripper and die block (2004)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Atkin - Chin Shung LVD600 - 600mm Wide Precision Levelling Unit for mild steel 0.5 - 3mm. With 3 upper & 4 lower rolls, 2 inlet/ 2 exit rolls. Feed 18m/min. Pneumatic inlet roll pressure. Drive 7.5hp (1998)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Atkin - Chin Shung Taiwan UC600 - 600m Wide Decoiling Unit, Manual mandrel expansion 480 - 520mm. Coil weight 5000kgs. S/No.U6398001 (1998)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Atkin - Chin Shung NCP-600 - 600kmm Wide Press Roll Feed Unit, 2 feed rolls, feed 18m/min, feed height 70-180mm, servo motor. S/No.698001 (1998)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Whitney Hand Operated Punching Unit

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Elumatic EP124 Crimping Machine with Support Head, Compression height 140mm, force 7 tons, pneumatic operated ( 7 bar) (2005)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Meddings A10, 19 mm, Articulated Head Drilling Machine, No 2 MT spindle, speeds 80 – 4000 rpm. Elevating tee slotted table 610 x 610 mm.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Q&S Model QDM625 - 5/8" ( 16mm) Belt Change Bench Drill, Speeds 300 - 2200 rpm, 290 x 280mm table, sensitive feed, chuck.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Esab Aristo LUC500 - 500amp Mig Mag Welder with Esab A!0-MED44 Wire feed unit, TIG torch, Earth clamp. S/No.5507122610

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

MG MCCR 2-Ton Variable Speed Conventional Welding Rotators, max roll centre 700mm. Rubber tyres, drive and idler unit, sepersate controlpanel, pendant control,. S/No.1428 (2008)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

GB HGW160 -160Amp Petrol Driven Portable Welding Generator, 110volt socket, torch

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Lincoln Electric Portable Welding Fume Extractor with flex hose and hood, 110 volts single phase

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Industri Filter Mini Arodyn Monobag, 0.75KW Dust Extraction Unit. Item number 040705, 240 volt.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Airmaster 7.5M, 1.5 KW Dust Extraction Unit, Bag type with manual shaker, separate spark arrester, starter panel. S/No. 89120350

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Vixen 800 x 800 x 700mm Suction Type Shotblast Cabinet with separate dust extraction unit

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Rigid Compact 300 - 3" Pipe Threading Machine with tooling as available, on frame, foot pedal. 110v single phase supply

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Canning Double Ended Spindle, 5HP Motor with 2 x 50 mm wide linishing/grinding belts, with starter. Mach/No A5735.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Loser KS360 Backstand Linishing Machine - 50mm wide belt. S/No.125/64

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Almi AL100U-OI Pipe Notching and Belt Grinding Machine, Grinding dia 20-76mm. 3Kw motor. 4 assorted size mandrels. Spare belts.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Carborundum 50mm Wide Back Stand Linishing Machine, 3hp motor, Stop button, S/No.2261

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Abwood TG170 Double Ended Tool Grinder with twin tilting tables, spindle speed 3000 rpm, machine light. S/No. 341.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Antiferance FC3P Aluminium Router with pneumatic clamping, 3 phase.S/No.A1433 (1999)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

Ingersoll Rand Type 30, 15cfm Reciprocating, Receiver Mounted Air Compressor, Working pressure 150 psi with starter and pressure switch. S/No TP214371.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

1850 x 1130 x 540mm High Tee Slotted Box Table - 5 off longt'l top tee slots, one side with single slot

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser

(2) Roller Tracks - Sizes: 2500mm x 500mm wide, 75mm dia Rollers & 1500mm x 500mm wide, 75mm dia Rollers

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser