Bomar Type STG 610.440 DGH Horizontal Bandsaw, Capacity: 440mm Diameter, Double Mitre, Hydraulic Bow, Hydraulic Vice (2004)

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Ajax Premier 260 CNC Gap Bed Centre Lathe with Fagor CNC Control, 21" Swing over Bed, 60" between Centres (1998)

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Union BF63 Horizontal Boring Machine with 3-Axis Digital Readout, Table Size: 900mm x 700mm, Spindle Diameter: 63mm, Facing Head: 400mm

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Hahn & Kolb 2-Wheel Fine Grinding, Flat Honing, Lapping & Polishing Machine with 30" Diameter Grinding Wheels

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

TOS Type FA5B Horizontal Milling Machine with Digital Readout, Table Size: 2000mm x 450mm, Longitudinal Traverse: 1400mm, Swivelling Vertical Head: 50 ISO, Universal Vertical Head: 40 ISO

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Asquith OD1 MK2 14/54 4' 6" Radial Arm Drill. 5 Morse Taper Spindle, Speeds: 22 - 1000rpm

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Richmond Type SR3 36" Radial Arm Drill, 3 Morse Taper, Speeds: 50 - 1500rpm, Rise & Fall Table

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Fielding & Platt Ltd Hydraulic Horizontal Press, Capacity: 100-Ton, Ram Size: 10" Diameter, Platen Size: 48" x 46".

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Kingsland 85XS Hydraulic Iron Worker, Capacity: 85-Ton, Punching Capacity: 33mm through 20mm or 55mm through 12mm

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Hatch - Steco Type LTP 5DE Pyramid Sheet Bending Rolls, Capacity: 8ft x 1/4", 8" Diameter Top Roll

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Beaver VC45 Travelling Head Vertical Machining Centre with Fanuc OM Control, Table Size: 2400mm x 400mm, Table Travel: 2000mm x 400mm, Twin Tool Changer

Please Note: This Item is located in Westhoughton

Roundo Type R-2 Angle & Tube Bending Machine, Capacity: 7cm/3 with 8 Sets of Formers

Please Note: This Machine has been re-painted

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Rileys Crane Services Large 'A' Frame Lifting Gantry, Capacity 2-Ton, Height: 5600mm,Width: 8100mm (approx)

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Rileys Crane Services Swing Beam Lifting Gantry, Capacity: 2-Ton, Arm Length: 4000mm (approx) with 2-Ton Electric Hoist, Column Height: 4.3m (approx), Hook Height: 2.7m (approx)

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Rileys Crane Services Swing Beam Lifting Gantry, Capacity: 1-Ton, Arm Length: 4000mm (approx) with Demag 1-Ton Electric Hoist, Column Height:  4.3m (approx), Hook Height: 2.7m (approx)

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Still R70-20T Compact Gas Fork Lift Truck, Capacity: 2000kg, Capacity at Full Height: 1700kg, Lift Height: 2860mm with Side Shift (2000)

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Coventry Climax Type 50-EC-1159 Electric Fork Lift Truck, Maximum Working Capacity: 4200 lbs, Side Shift to Forks

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Hand Fork Lift Manual Hydraulic Stacker, Capacity: 1000kg, Fork Length: 115cm, Fork Height: 157cm, Handle & Foot Pump

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Sykes V10 Gear Shaper, 10" Rotary Table with Change Gears

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Butler Precision Toolroom Slotter, 12" Capacity, Table Size: 24" Diameter, 19 - 75 Cycles per min

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Pratt & Whitney Model B Toolroom Slotter, 6" Capacity, Table Size: 500mm diameter, 33 - 116 Cycles per min

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Colchester Mascot 1600 Gap Bed Centre Lathe, 17" Swing over Bed, 28" Swing in Gap, 80" between Centres, 3" Spindle Bore, Speeds: 20 - 1600rpm

Please Note: This machine has been re-painted

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Colchester Triumph 2000 Gap Bed Centre Lathe with Digital Readout, 15" Swing over Bed, 23" Swing in Gap, 50" between Centres, 2" Spindle Bore, Speeds: 25 - 2000rpm

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Harrison M300 Gap Bed Centre Lathe, 330mm Swing over Bed, 480mm Swing in Gap, 1000mm between Centres, 38mm Spindle Bore, Speeds: 40 - 2500rpm

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Elliott Omnispeed Gap Bed Centre Lathe, 16" Swing over Bed, 22" Swing in Gap, 36" between Centres, 2" Spindle Bore, 3 & 4 Jaw Chucks, (2) Face Plates

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

TOS Type FA4AV No.4 Size Vertical Milling Machine, Table Size: 1600mm x 350mm, Longitudinal Traverse: 1300mm, 50 ISO Taper, Speeds: 32 - 1400rpm

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

TOS Type FGS50 Horizontal Knee Type Milling Machine, Table Size: 1800mm x 650mm, 50 ISO Taper, Double Swivel Vertical Powered Overarm, 23 kW Motor

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Bridgeport 1ES Horizontal Milling Machine with R8 Taper Head, Table Size: 30" x 8", Spindle Taper: 40 ISO, Speeds: 50 to 2500rpm

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Dean Smith & Grace Type 17 X 36 Centre Lathe, 18" Swing over Bed, 10" Swing over Cross Slide, 36" between Centres, 16" 4-Jaw Chuck

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Ajax AJ40 Geared Head Pillar Drill, No.4 Morse Taper Spindle, 40mm Capacity, Speeds: 56 - 1000rpm

Please Note: This Item is in need of attention, sold as is

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Archdale Geared Head Pedestal Drill, No.5 Morse Taper Spindle, Speeds: 23 - 580rpm, Throat Size: 15 1/2".

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Cincinnati No. 2 Tilt Head Tool & Cutter Grinder, Table Size: 36" x 6"

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Elliott U2 Horizontal Milling Machine, Swivel Table Size: 42" x 11", Spindle Taper: 40 ISO, Speeds: 31 to 1010rpm with Horizontal Arbor & Support

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Clarkson MK 1 Tool & Cutter Grinder

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Churchill Denham SR10V Heavy Duty Gap Bed Centre Lathe, 22" Swing over Bed, 96" between Centres, 3 1/2" Spindle Bore, 3-Jaw Chuck, 24" 4-Jaw Chuck, 34" Face Plate & Steady

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Buxton Type IP 50/6 Initial Pinch Powered Sheet Bending Rolls, Capacity: 50" x 1/4", 6" Diameter Rolls, Drop End

Please Note: This machine has been re-painted

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Jones & Shipman 540P Surface Grinder, Capacity 18" x 6", Power Rise & Fall to Wheel Head, 18" x 6" Magnetic Chuck

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Abwood Type GG4H Vertical Spindle Grinder, Grinding Wheel Size: 8" Diameter, Capacity: 18" x 8"

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Jung Surface Grinder, Capacity: 24" x 8", Hydraulic Table Feeds, 24" x 8" Magnetic Chuck, Coolant/Dust Tank

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Churchill HB Toolroom Surface Grinder, Capacity: 18" x 6", 10" x 5" Magnetic Chuck

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Morgan Power Guillotine, Capacity: 1250mm x 4mm

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Pullmax Type P5/2 Nibbling Machine, Throat: 40" with Tooling

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

ISM Powered Swaging Machine, Throat: 700mm, Motor: 2 HP

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

E.M.B. Type SM50 Flexi Press, Ram Diameter: 4", Distance Table to Ram 15", Throat: 8", Platen Size: 26" x 12", Motor: 10 HP

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Vertical Hydraulic Power Press, Table Size: 14" x 12", Throat: 8 1/2"

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Startrite Sabre Vertical Bandsaw, Throat: 20", Table Size: 23" x 23", Variable Speed, Tilting Table, Blade Welder

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

DoAll Model V2013-20 Vertical Bandsaw, Table Size: 26" x 26", Throat: 20", Daylight 14", Variable Speed: 0 - 1585 m/min

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Eisel Type VMS 11 Cut Off Saw, Blade Size: 250 mm Diameter

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Ingersol Rand SSR ML15 Rotary Compressor, 2.5 Cubic metres per minute, Max Discharge Pressure: 7.7 Bar, 16.5 Kw Motor

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Fluidair Type RPK Rotary Air Compressor, Working Pressure: 115 psi, Discharge Pressure: 8 Bar with Fluidair Rotastar Control

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Boge Type S10 Rotary Screw Compressor, Rate of Flow: 1.18m3/min, Max Pressure: 8 Bar, Motor Power: 7.5 Kw (1999)

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Hydrovane Type 23 Air Compressor, 4 kW Motor

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

HPC Plusair Mini Model SSM6 Rotary Screw Compressor, Safe Working Pressure: 7.5 Bar, 3-Phase Electrics, Reciever Capacity: 127 ltr (1991)

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Carbolite Electric Oven, Aperture: 41" x 42" x 45" Depth with Eurotherm Temperature Control

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Vixen Tristar Type TS500 Degreasing Machine, Drum Diameter: 520mm, Length: 2125mm, Mesh Size: 5mm, Screw Pitch: 200mm, Load Capacity: 75kg, Fluid capacity: 250 ltr (Wash Tank) 150 ltr (Rinse Tank) with Tristar Vibratory Feeder (1999)

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Donaldson Torit Type DF+4 R SPKTRP Fume Extraction System, Input 400V, Output 24V with Torit Control and Fike Explosion Vent (2001)

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Kjellberg Finsterwalde Fine Focus 800 Plus Plasma Power Source with Cables and Torch, Capacity (Thickness) Mild Steel 5 to 60 mm, Stainless 5 to 60 mm, Aluminium 6 to 60 mm (2004)

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Merkle Type M452D Mig Welding Set, 450amp with Merkel Type DV-25/4, 4-Wheel Wire Feeder & Electac MT800 Extractor

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Merkle Type M452D Mig Welding Set, 450amp, Merkel Type DV-25/4, 4-Wheel Wire Feeder and Electac MT800 Extractor

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle

Fromig Type 451 Mig Welding Set, Capacity 450 amp with FRO AT/K Wire Feed Unit

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle