Trumpf Trumabend 125 Ton x 3200mm, Over bed, Downstroke Hydraulic CNC Press Brake, admit 2550mm between Side Frames, Delem DA58, 4-Axis Control (y1,y2,x,r), fitted with Crowning on Bed (V axis), Max Stroke: 200mm, Max Daylight excluding Tools: 400mm, fitted with Intermediate Bottom Die Holder for Single Vee Tooling, Sick Machine Mounted Operator Guards, Side and Rear Fences, Quantity of Top and Bottom Tooling, Foot Pedal/ Pedestal Control. S/No. 88.019 (1994)

Top Tools:-                        

2400mm @ 86 00 R300

2400mm @ 86 00 R200

2200mm @ 28 00 R200

1000mm @ 88 66 R100

Bottom Tools:-

2400mm @ 40mm vee

600mm @ 50mm vee

2500mm @ 20mm vee

3300mm @ 10mm vee

5000mm @ 25mm vee

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Adira GHA 100-30, 100 Ton x 3050 mm, Over Bed Upstroke Hydraulic Press Brake, admit 2550mm between Side Frames, Manual Sliding Back Gauge, GH Machine Mounted Operator Guards, Side Fences, Full Length Top 10/10 88 Degree Tooling, Full Length Multi Vee Die Block, Treadle Bar Operation. S/No 3508/6852 (1993)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

King Macc 40 Ton x 2050 mm, Over Bed Downstroke Hydraulic Press Brake, admit 1550mm between Side Frames, with 2 Axis NC Control with Readouts (x,y). Machine Mounted Operator Guards, Side and Rear Fences. Full Length Top Tooling and Bottom Multi Vee Die Block with Intermediate Clamping System. S/No 2217 (2008)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Guifil PE6-16, 16 Ton x 600 mm, Over Bed Upstroke Hydraulic Press Brake, admit 500mm between Side Frames, Full Length Top Euro Style Tooling, Intermediate Clamps, Bottom Euro Style Twin Vee Tooling, Manual Sliding Type Back Gauge with Toolposts. Foot Pedal Operated with Twin Push Button Safety Feature, Side and Rear Fences. S/No 075-00109 (1998)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

K & B Donewell 15-1300, 15 Ton x 1300 mm, Over Bed Downstroke Hydraulic Press Brake, admit 1030mm between Side Frames, Manual Front Operated Back Gauge. Smartscan Machine Mounted Operator Guards, Side and Rear Fences. Full Length Multi Vee Die Block, Top Tooling. S/No 17905 1415 (1979)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Keetona 100” x 1/8” (2540 x 3 mm), Hydroform Universal Bending and Folding Machine. Pro Rata Capacity 1016 x 6 mm, Full Length Segmented Tooling. S/No HUF818713 (1798)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Adira GhSO660, 6000 mm x 6.5 mm, Hydraulic Swing Beam Guillotine Shear with Adiramatic Programmable Back Gauge Control (1000mm), Manual Blade Gap Adjustment, Pneumatic Rear Sheet Support with Pin System Incorporated in Back Gauge Bar for Additional Material Support, Front Supports, 3m Squaring Arm. S/No 3904/10316 (2000)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

King Macc EX200, 2050 mm x 6 mm, Hydraulic Variable Rake Guillotine Shear, Power Operated Back Gauge with DRO, Blade Gap Adjustment, Stroke Limit, Front Supports, Squaring Arm, Side and Rear Fences, Foot Pedal Control. S/No 2283 (2008)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Guifil GH320, 2050 mm x 3 mm, Hydraulic Guillotine Shear, Power Operated Back Gauge, 1 Metre Long (Metric), Blade Gap Adjustment, Front Supports, Squaring Arm, Rear Fences with Light Sensors, Foot Pedal Operation. S/No 023867 (1995)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Pearson 1220 mm x 3 mm, Hydraulic Swing Beam Guillotine Shear, Power Operated Back Gauge (Imp/Metric), Squaring Arm, Spare blades. S/No 5962 (1974)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Tauring Alfa 40H1, 50 x 50 x 6 mm Angles Section Bending Machine, Fixed Top Roll, Hydraulic Adjustment to Bottom Right Roll, Manual Adjustment to Bottom Left Roll, 3 Rolls Drive, Flats on Flat 60 x 15 mm, Flats on Edge 50 x 8 mm, Box Section 40 x 40 x 2mm, tubes 60 x 2 mm, with Standard Rolls, Plus Tube Rolls for 50 mm, 40 mm, 32 & 20 mm on Same Formers, Separate Foot Pedal Control.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Isitan PK30F, 40 x 40 x 5 mm Angles, Section Bending Machine, Manual Adjustment to Top Roll, Two Rolls Driven, Flats on Flat 80 x 15 mm, Flats on edge 50 x 10 mm, Box Section 50 x 30 x 3 mm, Tubes 1 ½” x 2.9, Double Foot Pedal Control, Horizontal/Vertical working Position.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Sahinler PK20, 30 x 30 x 4 mm Angles, Section Bending Machine, Manual Adjustment to Top Roll, Two Rolls Driven. Flats on Flat 50 x 10 mm, Flats on Edge 30 x 10 mm, Box Section 30 x 30 x 2 mm, Tubes 30 x 2 mm. Foot Pedal Operation. S/No 192704 (2006)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Amada Promecam (FIM) Versa V204, 200 x 200 x 4 mm, Hydraulic, Variable Angle Corner Notching Machine, Adjustable Angle 30 – 135 Degrees. Bed Stops and Guides, Foot Pedal Control. S/No. V204914 (1989)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Amada CSH-220, 220 x 220 x 6 mm Hydraulic Corner Notcher, Table 1050 x 800 mm, Foot Pedal (1982) Please Note: There is some damage to Tee Slot on Bed, sold as is

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Pierce All, 200 x 200 x 6 mm, Hydraulic Fixed Angle Corner Notching Machine, Table Guides, Table Area 1250 x 800 mm, Foot Pedal Operation, Lighting.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Davi 3050mm x 8mm, Three Roll, Hydraulic, Double Initial Pinch Plate Bending Rolls, Top Roll Diameter: 245mm, Rolling Only Capacity: 10mm, Hydraulic Adjustment to both Side Bending Rolls, Hydraulic Counter Balance and Drop End. To be fitted with Safety Trip Wires.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Edwards 2465mm x 2mm, Hand Operated, Geared, Initial Pinch Bending Rolls. Roll Diameter: 125mm, Bottom Roll to Slip.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Irle B80HH Hydraulic Ring Forming Machine, Capacities 30 x 10 mm Flats on Edge @ 200 mm, 45 x 12 mm @ 500 mm, 65 x 15 mm @1000 mm, Angles (Leg Out) 30 x 5 mm @ 200 mm, 40 x 7 mm @ 500 mm, 60 x 8 mm @ 1000 mm, Used for Bending Other Sections, tubes etc. Separate Hydraulic Unit Type 361/SEP, Foot Pedal Control. S/No. 1142.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

King Macc GM60B, 60 x 2 mm Wall Capacity, Hydraulic Mandrel Tube Bender, with Touch Pad Control, Manual/Auto Settings. Hydraulic Clamping, Hydraulic Mandrel Retraction, 2 Metre Mandrel Bed, Formers 1 ½” and 1 ¾”. S/No 499 (2008)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Piranha P50, 50-Ton, Hydraulic Universal Steelworker, 120 x 120 x 10 mm Angles at 90 Degrees, Punch 22 x 20 mm, Flat Shear 350 x 15 mm, 250 x 20 mm, Rounds 38 mm, Squares 25 mm, Notch 70 x 100 x 6 mm. S/No. 6958E (1998)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Eckold HA500/2 MobilFormer Sheet Metal Forming Machine with (2) Large Tube Expanding Tools. S/No. 119/692

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Bigstone CF-600AW, 600 mm Rounds Semi Automatic Column Type Horizontal Bandsaw, Square Capacity 600 x 600mm, Variable Blade Speed Drive, 9 x Feeding Counter, Hydraulic Blade Tension, Bundle Clamping with in – Out Roller Track (1999)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Excel BSA320VL, 320 mm Rounds Horizontal Semi Automatic Horizontal Bandsaw, Rectangles at 90 Degrees 310 x 610 mm, Rounds at 45 Degrees 320 mm, Rectangles at 45 Degrees 180 x 460 mm. Hydraulic Down Feed, Auto Cut Off and Lift of Bow. Including Coolant, Separate 1800 mm x 450 mm Wide Roller Track. S/No 1007 (2000)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Kaltenbach KKS400NA, 400 mm Diameter Blade Upcutting Circular Cold Saw, Capacities with 400 mm Diameter Blade at 90 Degrees, 130 mm Rounds, 120 mm Squares, 315 x 40 mm Flats, 240 x 85 mm Channels. At 45 Degrees 180 x 70 mm Channels, Channels on Edge 120 x 55 mm, with Coolant. S/No. 11175.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Kaltenbach KSP400, 400 mm Diameter Blade Up Cutting Semi Auto Circular Cold Saw, Solid Rounds 110 mm, 400 mm Width Capacity, Used for Cutting Plates and Sections, with Vertical and Horizontal Hydraulic Material Clamps. Swivel Vice, Coolant. S/No. 7337

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Startrite 30RWH, 760 mm Throat Vertical Band Saw, Height Under Guides 250 mm, Table with Hydraulic Feed, 520 x 520 mm, With Blade Grinder, Welder. S/No 57410

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Midsaw Minor 400mm Throat Vertical Bandsaw, Height Under Guides: 200mm, Fixed Table: 450 x 450mm, Adjustable Speed Range, Brazing Unit. S/No. 6004

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Bode SAR100 5-Ton Self Aligning Welding Rotators, (1) Drive Unit, (1) Idler Unit, Pendant Control, Variable Speed Drive

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

BAR SAR100 5-Ton Self Aligning Welding Rotators, (1) Drive Unit, (1) Idler Unit, Pendant Control, Variable Speed Drive #

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Thermal Arc Fabricator 400amp Mig Welder with VF4EC Wire Feed Unit. S/No. 16839 Please Note: This Machine does not have Torch, Gauges etc, Sold as is.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Nexus NXM300, 300 amp Mig Welder with Integral Wire Feed, Earth Clamp. S/No. 226 040A 706776. Please Note: This Machine does not have Torch, Gauges etc, Sold as is.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Murex Tradesmig 293, 270 Amp Mig Welder, with Integral Wire Feed, Torch, Gauges, Clamp. S/No 98M/0141.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Boc Transmig 250, 250 Amp Mig Welder, Separate Wire Feed, Torch and Gauges. S/No 2L0325.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Kende BXI-250C, 250 Amp Ac Tig Welder, with Torch, Clamp, Single Phase.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Thytronic 155, 150 Amp Tig Welder, with Torch, Clamp, S/No RA153E8.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Kamanchi300S, 300Amp Mig Welder, with Feeda 2S Separate Wire Feed Unit, Torch, Clamp. S/No. G06 500540.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Murex Tradestig AC/DC 180 Amp Mig Welder with Torch. S/No. 370006 Please Note: This Item is damaged, sold as is

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Murex Tradesmig 263, 265amp Mig Welder with Integral Wire Feed, Torch & Clamp. S/No. 523-606-4102

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

SIP Merlin 250 Turbo 250amp Transformer Welder with Torch

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Murex Sabre Arc 351 35amp at 40% Duty Air Plasma Cutter, for Material to 12mm Thickness with Torch. S/No. POR1723020

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

WTC Econocut System 1 Air Plasma Cutter, 30. 60amp, Gun, Clamp, 12mm Mild Steel Capacity. S/No. 1091010

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

PW Type 5284, 25 KVA Scissor Type Suspended Spot Welder, with Cooler, Balance Hoist, Column, Jib, Control Panel on Column. S/No. 7070

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Sureweld PEI PN25, 25Kva, Scissor Type Suspended Spot Welder with Cooler and Balance Hoist. S/No. 0405287 (2004)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Hare PO 10-Ton, Open Fronted Downstroke Hydraulic, High Speed Press, Bed Area 305 x 455 mm, Tee Slotted. Daylight 320 mm, Throat Depth 175 mm, Adjustable Stroke, Fast/Slow Approach Settings, Interlocked Guard, Emergency Stop Button, Foot Pedal Operation. S/No. 1307.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Hare AM300 3 Ton High Speed Hydropneumatic Bench Press, Tee Slot Table 300 x 195 mm. Adjustable Stroke Maximum 100 mm, Maximum Daylight 220 mm, Throat Depth 120 mm. Air Consumption Per Stroke 0.21 Cubic ft. Perspex Interlocked Guard. S/No. 92BO708 (1992)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Hare AM300 3 Ton High Speed Hydropnuematic Bench Press, Tee Slot Table 300 x 195 mm, Adjustable Stroke Maximum 100 mm, Maximum Daylight 220 mm, Throat Depth 120 mm. Air Consumption Per Stroke 0.21 cubic ft Perspex Interlocked Guard. S/No. 83BO292 (1983)

Hare AM150 1.5 Ton High Speed Hydropnematic Bench Press, Tee Slot Table 254 x 152 mm, Adjustable Stroke Maximum 60 mm, Maximum Daylight 183 mm, Throat Depth 82 mm. Air Consumption per Stroke 0.1 Cubic ft. Perspex interlocked Guard. S/No. 94A0864 (1994)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Hare AM150 1.5 Ton High Speed Hydropnematic Bench Press, Tee Slot Table 254 x 152 mm, Adjustable Stroke Maximum 60 mm, Maximum Daylight 183 mm, Throat Depth 82 mm. Air Consumption per Stroke 0.1 cubic ft. Perspex Interlocked Guard. S/No. 94A0866 (1994)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Hare AM150 1.5 Ton Hydropneumatic Bench Press, Tee Slot Table 254 x 152mm, Adjustable Stroke Maximum: 60mm, Maximum Daylight: 183mm, Throat Depth 82 mm. Air Consumption per Stroke 0.1 cubic ft. Perspex Interlocked Guard. S/No. 93A0834 (1993)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Maho Graziano GR500C, 430 mm Swing Over Bed, CNC Lathe with CNC432 Control, Turning Length 620 mm, Spindle Bore 82 mm, Spindle Speeds 20 – 2500 rpm, Swarf Conveyor, 53 kw motor. S/No 21623

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Progress 3A, 30 mm Heavy Duty Column Drill, Spindle No3MT Power Feed, Reverse, Speeds Belt Change) 70 – 1780 rpm. Elevating Tee Slotted Table 560 x 460 mm with Coolant.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Jones &Shipman Hand Operated Rack Type Arbor Press, Daylight: 370mm, 225mm Diameter Table.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Simplex 66/0181 Masterlap Double Ended Lapping Machine, with Cup Type Grinding, Universal Tables, 355 x 220 mm, Guides for Angle Grinding, Coolant, Extraction Hoods. S/No. 241

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

GrindingMaster MCSB900, 900 mm Wide Belt Surface Finishing Machine, 2 Speed Main Motor, Conveyor Feed Speed 6 – 24 m/min, Power Rise and Fall to Table, Front Roller Table, S/No KN32709

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Nutools 6” Belt Grinder, 12” Diameter Disc Sander, Mounted On Table, fitted with 4” Wide Belt. S/No. 894381 (1989)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

RJH Antelope Bandfacer, 150mm Wide x 1090mm Vertical Belt Linishing Machine with lntegral Dust Extraction, Emergency Stop Bar. S/No 16626 (1996)
Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Guyson Model 800GL Suction Shotblast Cabintet System, Cabinet internal 1000 x 750 x 1400 mm High, with Last Nozzle, Foot Pedal Control. Separate Dust Extraction Unit. S/No. 88124 (1988)

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Pooley 210 KGS Platform Scales, Model 32/XCG/972. S/No 5561044.

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle

Sealey Superstart 320 Battery Starter/Charger, Single Phase with Earth Clamp

Please Note: This Item is located in Sheffield and will be loaded free of charge to a suitable vehicle