TPM 4000mm Back Coating Machine, 4 Metre width. S/No. 010207 with;

Dohle Ultra/Super Piece End Sewing Machine (2001), Unreel Stand, Accumulator Section,  Steaming Box,  Latex Roller Coater, Hessian Backing Section, Dryer (approx.) 3Om long with 14 x Gas Burners & 14 x Circulating Fans, Clip Stenter Conveyor, Slitting & Trim Knives, Accumulator Section, Sellers Triple Head  Shearer (5 metre), Accumulator Section, Cross Knife Cutter, Fume Extractor Controls & Associated Equipment.

This machine has been running up until early August producing top quality carpets into both the domestic and contract market. It has a capable running speed of up to 8mts per min and can if required go down in width to 3.66cm

Back Coating Machine, 5 metre width with;

Frame mounted piece end Sewing Machine, Unreeling Section, Accumulator Section, 2 Latex Roller Coating Sections, Stain Blocker Section, Hessian Unreeling Frame, Dryer (approx.) 20m long with 5 x Gas Burners & 7 x Circulating Fans, Pin Stenter Conveyor, Slitting & Trimming Knives, 2 x Accumulators, Sellers Twin Head Shearer, Accumulator Section, Cross Knife Cutter, Reel up, Fume Extraction with Controls and Associated Equipment.  

This machine has been running up until early August producing top quality carpets into both the domestic and contract market. It has a capable running speed of up to 4.57mts per min and can, if required, go up and down in width producing 3.00,3.66.4.00,4.57 and 5mt

Sellers 5 Metre Stand-Alone Twin Head Shearing Machine with Unreeling Stand, Accumulator Section, Sellers 2-part Shearer, Reel-up & Controls, Dust Extraction

Storage Tank for Latex – (approx.) 7.2m (l) x 2.8m (w)

TPM 3 Metre Carpet/Underlay Back Coating Machine. S/No. 920447 (1992) with;

Dohle 852-914 Mobile Piece End Sewing Machine (1992), Unreel Stand, Overhead Accumulator with Gas Fired Heating Roller Coater, Mobile Drip Tray, Infra Red Dryer (1999) with 5 x Heaters,  Nip Roller, Infra Red Dryer with 3 x Heaters, 8-Section Dryer (approx.) 25m long with 16 x Gas Burners & 16 x Circulating Fans , Pin Stenter Conveyor, Slitting & Trimming Knives, Accumulator Section, Reel up, Overhead Fume Extraction with Controls & Associated Equipment.

This machine is capable of backing and mix blend of carpets from undelay washable waffle bathroom carpets car carpets foam backed and also hessian backed carpet it can do various widths from 50cm wide upto 3.00mt wide

ELCO Multi width  Automatic Wrapping Line with Infeed & Delivery Conveyors. S/No. G40539-03

Inspection Table – 5m with Hydraulic In-feed and Chain driven Roll Up

Schwab Type TSM 500 SV73 5m Cutting/Inspection Table with Travelling Cross Cut Knife, Width Trimmer & Controls. S/No. 400011081 (1988)

This machine with three operatives is capable of doing up to 100 cuts per day. It comes with a Loading Magazine and a magic eye Unroll Table making sure true roll up a 5mt inspection table and semi automatic roll up  

Pickering 5 Metre 1/8th Gauge CNC Graphic Tufting Machine with Creel Producing 80/20 Wool Rich Carpets

This Machine has capabilities of pattern tufted graphics for the contract market as well as domestic

ITS Tufting Machine, 4 Metre, 1/8 ^th gauge Tufting Machine with Double Magazine Creel producing 80/20 Wool Mix Yarns  

ITS Challenger 4 Metre, 1/8 ^th gauge Tufting Machine with Double Magazine Creel producing 80/20 Wool Mix Yarns

Pickering Tuftomatic 5 Metre, 5/32 ^nd Gauge 1/8 ^th gauge Tufting Machine with Double Magazine Creel producing 80/20 Wool Mix Yarns. S/No. 110/202/CP

ITS 4 Metre, 1/8 ^th gauge Tufting Machine with Double Magazine Creel producing 80/20 Wool Mix Yarns (Reconditioned)

ITS Challenger 4 Metre 1/10 ^th gauge Tufting Machine with Double Magazine Creel producing 80/20 Wool Mix Yarns  

ITS 4 Metre 10 ^th gauge Tufting Machine with Creel, currently producing 2 Metres  - for Floor Tile to the Contract Market

ITS 4 Metre 1/8 ^th gauge Tufting Machine with Double Magazine Creel producing 80/20 Wool Mix Yarns

TUFTCO 5 Metre 1/10 ^th Gauge CNC Graphic Tufting Machine with Creel Producing 80/20 Wool Rich Carpets

This Machine has capabilities of pattern tufted graphics for the contract market as well as domestic

ITS Challenger 5 Metre1/8 ^th gauge Tufting Machine with Double Magazine Creel producing 80/20 Wool Mix Yarns

ITS Challenger 4 Metre 1/8 ^th gauge Tufting Machine with Double Magazine Creel producing 80/20 Wool Mix Yarns

Pickering 5 Metre 1/8 ^th gauge Tufting Machine with Double Magazine Creel producing 80/20 Wool Mix Yarns. S/No. 964/202/CP

ITS 5 Metre 1/8 ^th gauge Tufting Machine with Double Magazine Creel producing 80/20 Wool Mix Yarns

ITS 5 Metre 1/8th gauge Tufting Machine producing 80/20 Wool Mix Yarns

This Creel is fitted with Beam Stands           

Pickering Tuftomatic 5 metre, 1/10th gauge Tufting Machine producing 80/20 Wool Mix Yarns

This Creel is fitted with Beam Stands

TUFTCO 1/8 ^th gauge Type 42040387-5  Tufting Machine with Double Magazine Creel producing 80/20 Wool Mix Yarns. S/No. 253211373A

Crawford Waste Baler. S/No. LL402

Hydrovane 830 Rotary Vane Compressor with After Cooler. S/No. 8300023650410

Hydrovane 178 Rotary Vane Compressor with After Cooler. S/No. 3HV574804/3/3

Hydrovane 711 Rotary Vane Compressor with After Cooler. S/No. 711C021659802

Hydrovane 68 Rotary Vane Compressor with After Cooler

Cool Technology 490ltr Vertical Air Receiver

Hydrovane 33 Rotary Air Compressor & Receiver

Gilbos GP10R 6-Spindle Rewinder. S/No. 7514993

Gilbos GF103 Single Spindle Jumbo Hank Winder

Gilbos GF103 Single Spindle Jumbo Hank Winder

Gilbos GF103 Single Spindle Jumbo Hank Winder

Gilbos GF103 Single Spindle Jumbo Hank Winder

Gilbos GF103 Single Spindle Jumbo Hank Winder

Gilbos GF103 Single Spindle Jumbo Hank Winder

Gilbos GF103 Single Spindle Jumbo Hank Winder

Gilbos GF103 Single Spindle Jumbo Hank Winder

Gilbos GF103 Single Spindle Jumbo Hank Winder

Gilbos GF103 Single Spindle Jumbo Hank Winder

Gilbos GF103 Single Spindle Jumbo Hank Winder

Gilbos GF103 Single Spindle Jumbo Hank Winder

Gilbos GF103 Single Spindle Jumbo Hank Winder

Qualters & Smith 260 Sawmaster Horizontal Bandsaw

Colchester Mascot 1600 Gap Bed Centre Lathe, 2m between Centres, 12” 3-Jaw Chuck, 16” 4-Jaw Chuck, 3-Point Steady. S/No. 7/0006/04223

Ajax Turret Milling Machine with Motorized Crossfeed, Table Size: 4ft x 9”. S/No. 17198B7417

Archdale 3ft Radial Arm Drill, Table Size: 3ft x 22”. S/No. 3023

Grimston Electriska Pillar Drill. Machine No. 17716

PEP 610 Hook & Knife Grinder

Bitender Schlafhorst, Type RC-10-R-1-U/EW

Benninger 2000 Warping Machine with Creel & Gibbo Type GF100

(3) Warping Beams

(3) Warping Beams

(3) Warping Beams

(3) Warping Beams

(3) Warping Beams

(3) Warping Beams

HEL Systems 4000mm Automatic Cutting & Wrapping Line with Conveyors

Please Note: This item is dismantled, sold as is