Los 4: MPT-18 Multi-Pass Cooling System

MPT-18 Multi-Pass Cooling System with 6m, (2) x 3m Joined Sections of 14 gauge (1.9mm Thick) #304 Stainless Steel Cooling Trough, Each 3m Section of Trough is equipped with (8) x Water Spray Nozzles, (2) x Hand Valves, (1) x Drain and (1) x Gasketed Cover, Solenoid Valve Is Installed in the Water Supply Manifold, aach Hand-Operated Valve Adjusts (4) x Water Spray Nozzles. Pneumatic Lines are Installed to the Air Cylinders and Push Button-Operated Solenoid Valves are Supplied to Open and Close the Covers, A Bank of Four, 2 Groove UHMW Sheaves is Mounted at Each End within The Cooling System, Plexiglass” Windows are Provided in The Areas of the Cover over the Sheave Banks, Ceramic-Coated Rods are Mounted at intervals within the Cooling System to Support and Stabilize, Total Cooling Length: 83m, Maximum Wire Speed: 1,200mpm. SO/No. 85941, S/No. BX065 (2008) SO/No. 85945, S/No. BX026 (2008), Plus Spares

Please Note: this lot is located in Swindon and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser.