Battenfeld Gloucester 150mm dia Extruder, 30:1 LD Twin Helix, 6-Zone with Screen Changer (2000)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Battenfeld Gloucester 70mm dia Extruder, 30:1 LD Twin Helix with Screen Changer (2000)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Battenfeld Gloucester Twin-Roll Cast/Cooling x 700mm dia Section (2000), Eurotherm Scanner (Please Note: For convenience of sale, the Krypton 85 sources are not included)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Hydraulic Core Puller with 3 x 6", 3 x 3" dia Rewind Shafts

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Combination of Lots 2A to 2T

2A - (4) x Stainless Steel Day Bins with Lift-All Floor Mounted 125kg Jib, Lift-All 23kg Sack Lifter. S/No. 4630 (2014)
2B - Hydreclaim 6 Component Continuous Blender
2C - Maguire 4 Component Gravimetric Batch Blender
2D - Maguire 4 Component Gravimetric Batch Blender
2E - Dust Collection, Re-Trim Waste System
2F - Chilled Water Tank/Pumping Station
2G - Excelsior Cast Line Control System, Switchgear
2H - 4 x Day Bins
2I - 2 x Dust Collection Frames
2J - Battenfeld Gloenco 90 mmm dia Extruder, 30:1 LD Twin Helix, with Nordson EH-35 Slide Plate Screen Changer (Fitted 2018)
2K - Battenfeld Gloenco 150mm dia Extruder, 30:1 LD Twin Helix, 6-Zone with Nordson EH-60 Slide Plate Screen Changer (Fitted 2018)
2L - Battenfeld Gloenco 90 mmm dia Extruder, 30:1 LD Twin Helix, with Nordson EH-35 Slide Plate Screen Changer (Fitted 2018)
2M - Cloreren Epoch Design Die & Feedblock with Temperature Controlled Deckles & Supporting Gantry
2N - Battenfeld Gloenco Twin-Roll Cast/Cooling x 500mm dia Section
2O - Thermofisher L400 Scanning Frame (Installed 2017) (Please Note: For convenience of sale, the Krypton 85 sources are not included)
2P - Sherman Double Sided Corona Discharge Treater with Tool-Temp TT-4500 Temperature Control Unit
2Q - Herbold SML 30 50 L3-3 Granulator, Serial No. 65970 (1995) with Accoustic Enclosure
2R - Wintech Indexing Turret Winder with Chilled Infeed Tension Rolls, Overhead Supporting Gantry
2S - Hydraulic Core Puller with 3 x 6", 3 x 3" dia Rewind Shafts
2T - Wall Mounted Rewind Shaft Storage Rack

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

(4) x Stainless Steel Day Bins with Lift-All Floor Mounted 125kg Jib, Lift-All 23kg Sack Lifter. S/No. 4630 (2014)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Hydreclaim 6 Component Continuous Blender

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Maguire 4 Component Gravimetric Batch Blender

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Maguire 4 Component Gravimetric Batch Blender

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Dust Collection, Re-Trim Waste System

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.