Brother TC32BN Twin Pallet CNC Vertical Machining Centre with Brother CNC BOO Control, Nikken 4th Axis Units (2007), Traverses X Y Z: 550 X 400 X 415mm, 2 Off Pallets 600 X 425mm, Spindle Speed 12000rpm, Spindle Taper BT30, Spindle Motor 6kw, 40 Station ATC, 2 X Nikken CNCZ180 4th Axis Units, Through Spindle Coolant, Swarf Conveyor, OMF1000 Extraction System.

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in Leicester, UK. A charge of £200 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

XYZ 1020 VMC Vertical Machining Centre (2012) with Siemens 828D Control, Traverses XYZ: 1020 X 520 X 575mm, Table 1120 X 500mm, 20Hp Spindle Motor, 8000rpm Spindle Speed, 24 Station ATC, BT40 Taper, Low Volt Light Coolant.

Please Note: This lot is located in Leicester, UK. A charge of £200 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Ort RP10C Thread Rolling Machine with Siemens “Touch” Control, Minimum Workpiece Diameter 2mm, Maximum Workpiece Diameter 30mm, Maximum Length of Plunge Feed 65mm, Maximum Length of Through Feed Unlimited, Maximum Pitch 2.5mm, Minimum Roller Diameter 85mm, Maximum Roller Diameter 135mm, Input 5,5Hp

Please Note: This lot is located in Leicester, UK. A charge of £200 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

SMT No.2- 8” CNC Centreless Grinder (2018) with Siemens 828D Control, Workpiece Diameter Range 1.6 – 76mm, Grinding Wheel Size 508mm Diameter X 203mm Wide X 305mm Bore, Regulating Wheel Size 305mm Diameter X 203mm Wide X 127mm Bore, Speed Range 12-300rpm, Spindle Power 12kw.

Please Note: This lot is located in Leicester, UK. A charge of £200 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

HAAS VF-6 Vertical Machining Centre (2004) with HAAS Control, Traverses X Y Z: 1626 X 813 X 762mm, Table 1626 X 711mm, Spindle Speed 0 - 7500rpm, Spindle Taper BT40, Spindle Motor 20Hp, 24 Station Side Arm ATC, 4th Axis Interface, Coolant, Low Volt Light, Swarf Auger

Please Note: This lot is located in Leicester, UK. A charge of £275 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

HAAS MDC-500 Twin Pallet Vertical Machining Centre (2012) with HAAS Control, Traverses X Y Z: 508 X 356 X 508mm, 2 off Pallets 508 X 324mm, Spindle Taper BT40, 20Hp Spindle Motor Giving 10000rpm, 24 Station ATC, Coolant, Swarf Conveyor, Programmable Coolant, Low Volt Light

Please Note: This lot is located in Leicester, UK. A charge of £200 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Addison Everising 360HA Automatic Horizontal Bandsaw

Please Note: This lot is located in Leicester, UK. A charge of £100 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

HAAS SL-20 3 Axis, With C Axis and Milling CNC Lathe (2006) with HAAS Control, Haas Servo Bar 300 Barfeed, 250mm Max. Machining Diameter, 610mm Between Centres, Swing Over Bed 508mm, 45 - 4000rpm Spindle, 52mm Bar Capacity, 10 Station Turret, 20Hp Spindle Motor, Tool Setter, Collet Chuck, Tailstock, 4 Off Driven Tools, Qty of VDI Static Tool Holders As Per Pics, Haas Servo 300 Barfeed

Please Note: This lot is located in Leicester, UK. A charge of £250 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Aligator Model 370A Auto Bandsaw (Year 2011)

Please Note: This lot is located in Leicester, UK. A charge of £150 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Startrite 18-T-10 Vertical Bandsaw

Please Note: This lot is located in Leicester, UK. A charge of £50 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.