Hurco VM10i Vertical Machining Centre with Win Max Hurco Control, Table Size 760 x 400mm, 20 ATC, Travels: X Axis 660mm, Y Axis 406mm, Z Axis 508mm, CAT40, 10,000rpm, 15Hp, Manufacturing Num H-V1E2384. S/No. 1610837FKAAH (2017). Country of Origin: Taiwan

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty CAT40 Tooling, Hurco Dial Height Gauge

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Combination of lots 1 & 1A

Lot 1 - Hurco VM10i Vertical Machining Centre with Win Max Hurco Control, Table Size 760 x 400mm, 20 ATC, Travels: X Axis 660mm, Y Axis 406mm, Z Axis 508mm, CAT40, 10,000rpm, 15Hp, Manufacturing Num H-V1E2384. S/No. 1610837FKAAH (2017). Country of Origin: Taiwan

Lot 1A - Qty CAT40 Tooling and Hurco Dial Height Gauge

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Haas Mini-Mill, Table Size 870 x 305mm, 10 Station ATC, BT40 Spindle Taper, Spindle Speed 6,000rpm, Rigid Tapping, Coolant Tank, 9 x Spindle Tools. S/No. 1170729 (02/2020). Country of Origin: U.S.A.

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Hurco VM10 Vertical Machining Centre, 20 ATC, Table Size 760mm x 400mm, Travel X = 660, Y = 406, Z = 508mm. S/No. VM10-16117021BHB (2011). Country of Origin: Taiwan

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Hurco 4 Axis Unit. S/No. H200-0419 with Tailstock. 

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty of CAT40 Tooling

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Combination of lots 3, 3A & 3B

Lot 3 - Hurco VM10 Vertical Machining Centre, 20 ATC, Table Size 760mm x 400mm, Travel X = 660, Y = 406, Z = 508mm. S/No. VM10-16117021BHB (2011). Country of Origin: Taiwan

Lot 3A - Hurco 4th Axis Unit. S/No. H200-0419 with Tail Stock

Lot 3B - Qty of CAT40 Tooling

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

XYZ Proturn SLX 1630 CNC Manual Straight Bed Lathe Proto Trax SLX Control, 400mm Swing, 760mm between centres, 54mm Spindle Bore, 2500rpm, 200mm 3-Jaw Chuck. S/No. 16P10010-144 (2013). Country of Origin: United Kingdom

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Various Quick Post Tool Holders

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Quick Change Tool Holders & Centre with various Lathe Tool Holders and Carbide Tips.

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Combination of lots 4, 4A & 4B

Lot 4 - XYZ Proturn SLX 1630 CNC Manual Straight Bed Lathe Proto Trax SLX Control, 400mm Swing, 760mm between centres, 54mm Spindle Bore, 2500rpm, 200mm 3-Jaw Chuck. S/No. 16P10010-144 (2013). Country of Origin: United Kingdom

Lot 4A - Various Quick Post Tool Holders

Lot 4B - Quick Change Tool Holders & Centre with various Lathe Tool Holders and Carbide Tips.

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Bridgeport BW 275 Sodick Wire Eroder, Travel X = 200mm, Y = 300mm, Z = 150mm, Table Size 300 x 400 x 140mm with Japax SD1 Super Drill, Elgastat Water Purification Unit and Spare Control Unit for BW 275. S/No. TBC, YOM: TBC

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Spacatron J.C.262 Die Sink EDM, SPF 60/120 Generator. S/No. H-805/3. Country of Origin: United Kingdom

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Colchester Triumph 2000 15" x 50" Gap Bed Centre Lathe, Tailstock, QCTP, Spindle Speeds 25 - 2000rpm, Dual Dials, Electric Brake, 3 & 4 Jaw Chucks, Travelling Steady. Country Of Origin: United Kingdom

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Various Quick Post Tool Holders

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

250mm 3 Jaw Chuck D1-6 Backplate

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Combination of lots 7, 7A & 7B

Lot 7 - Colchester Triumph 2000 15" x 50" Gap Bed Centre Lathe, Tailstock, QCTP, Spindle Speeds 25 - 2000rpm, Dual Dials, Electric Brake, 3 & 4 Jaw Chucks, Travelling Steady. Country Of Origin: United Kingdom

Lot 7A - Various Quick Post Tool Holders

Lot 7B - 250mm 3 Jaw Chuck D1-6 Backplate

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Jones & Shipman 1400L Surface Grinder, Table Size 25'' x 8'', Mag Chuck 24'' x 8'' with Coolant. S/No. BO 95019 (YOM TBC). Country of Origin: United Kingdom

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Jones & Shipman 540P Surface Grinder, Mag Chuck 18'' x 6'', Coolant and Dust Extractor. S/No. BO 93723 (YOM: TBC). Country of Origin: United Kingdom

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Jones & Shipman 540P Surface Grinder, Mag Chuck 18'' x 6'', Optidress Unit, Dust Extractor. S/No. BO 94880 (YOM: TBC). Country of Origin: United Kingdom

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Bridgeport Turret Mill BR2J2 Vari-speed with Chrome Slides Heidenhain Dro, Powered Table Feed, Table Size 1220mm X 239mm, Vice 150mm. S/No. 722253 (1999). Country of Origin: United Kingdom

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

R8 Tooling

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Combination of lots 11 & 11A

Lot 11 - Bridgeport Turret Mill BR2J2 Vari-speed with Chrome Slides Heidenhain Dro, Powered Table Feed, Table Size 1220mm X 239mm, Vice 150mm. S/No. 722253 (1999). Country of Origin: United Kingdom

Lot 11A - R8 Tooling

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Bridgeport Turret Mill Series 1 2HP with Chrome Slides Heidenhain Dro, Powered Table Feed, Table Size 1060mm X 230mm. S/No. 479490290Y (1990). Country of Origin: United Kingdom

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

R8 Tooling

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

R8 Tooling & Index Fixture

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Combination of lots 12, 12A & 12B

Lot 12 - Bridgeport Turret Mill Series 1 2HP with Chrome Slides Heidenhain Dro, Powered Table Feed, Table Size 1060mm X 230mm. S/No. 479490290Y (1990). Country of Origin: United Kingdom

Lot 12A - R8 Tooling

Lot 12B - R8 Tooling & Index Fixture

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Startrite 18-V-10 Vertical Bandsaw with Welding Unit, Table Size 480mm x 480mm, Throat Size 460mm. S/No. 66457M (YOM: TBC). Country of Origin: United Kingdom

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Jones & Shipman Model 1310 Universal Cylindrical Grinder, Tail Stock 18'' Between Centres, 8'' Swing, Magnetic Chuck, Swivel Workhead, External & Internal Grinder, Radius Dresser, Coolant. S/No. 60942. Country of Origin: United Kingdom

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Rambaudi M3 Heavy Duty Turret Milling Machine with Heidenhain DRO on X Axis Only, Table Size 1300 x 300mm, Spindle Taper 40INT, Spindle Speeds 40 - 3000rpm, Quill Stroke 6" (Machine Vice Excluded) 4kw Motor. Country of Origin: Italy

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Morgan Rushworth Manual Box and Pan Folder Capacity 1270mm x 1.5mm (Mild Steel)

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Ajax 10'' Powered Hacksaw. Country of Origin: Spain

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Indumasch Siegen Champher Machine

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Kobe Sander and Disc Linisher, Model SBD370. S/No. KBE-271-4140K. Country of Origin: United Kingdom

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Cemont Smarty 160 Power Welder, Single Phase with Equipment. Country of Origin: Slovakia

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Lafert Double Ended Polisher, Single Phase LM/M 90L L2. S/No. G1336. Country of Origin: Italy

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Milford No 1 Vertical Belt Linisher, 150mm Wide Belt, 3 Phase

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Norton Model 6 DB Flypress on Stand

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

MCR Shot Blast Cabinet, Internal 760mm long x 550mm wide x 650mm High

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Darenth Air Station Compressor, 11kw Main Drive Capacity 490 Litres, Hours 73065, Pressure 11.0 Bar, Max 100 Deg C. S/No. CT 31794 Test Date: (02/89). Country of Origin: United Kingdom

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Kaeser Dryer, Model TBH 16 Kryosec, Max Working Pressure PS 16 Bar. S/No. 1231-7047029 (2019) Country of Origin: Germany

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty of Drills, Taps, Cutters & Dies

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Qty of Digital Outside Micrometers, Sizes from 0-1 to 7-8, Clock Gauges and CFG Force Gauge

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Outside Micrometers Sizes from 0-25mm to 125-250mm, Digital Bore Gauge

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Slip Gauge Set Grade 1 and Pin Gauges

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Clamping Set

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

160mm Machine Vice

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

160mm Hydraulic Machine Vice

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

120mm Machine Vice

Please Note: This lot is located in Harlow, Essex, UK. Unfortunately, there are no loading facilities available, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.