Mori Seiki NT1000WZM Multi-Tasking CNC Lathe with Mori-Seiki MSX-711 Control, B, C & Y Axis. Workpiece Discharge Unit, Swing 368mm, Maximum Cutting Diameter 368mm, Maximum Cutting Length 368mm, Bar Capacity 51mm, Spindle Power 11Kw, 10 Station Turret, Milling Power 7.5Kw, Spindle Speed 6,000rpm, Milling Speed 12,000rpm, C Axis 0.001 Degrees, B Axis -/+ 120 Degrees, Y Axis -/+ 105mm, 38 Station ATC, Swarf Conveyor. S/No. NT100110017 (2010) Country of origin: Japan (Tooling as Per Photo)

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in Leicester, UK. A dismantling and loading onto suitable vehicle charge of £350 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Hurco VMX60U 5 Axis Machining Centre Traverses X Y Z: 1524 x 660 x 520mm, A Axis +30/ 110 Degrees, C Axis 0.001 Degree, Rapid Feed Rates 30 x 30 x 20m/minute, Spindle Taper DIN 40, Tool Changer 40 ATC, Min – Max Height Under Spindle 89 – 610mm, Spindle Motor 18kw. Spindle Speed 12,000rpm. S/No. MX44U-1610163CEDCS (2013). Country of Origin: Taiwan

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in Leicester, UK. A dismantling and loading onto suitable vehicle charge of £350 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Matsuura H-Plus 405 Machining Centre with Fanuc G-Tech 30I Control, Traverses X Y Z; 660 x 660 x 660mm, B Axis 1 Degrees, Pallet size 500 x 500mm, Number of Pallets 2, Spindle Taper BT40, Spindle Speed 12,000rpm, Spindle Power 15kw, 51 Station ATC, Through Spindle Coolant, Swarf Conveyor. S/No. 16556 (2006) Country of Origin: Japan

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in Leicester, UK. A dismantling and loading onto suitable vehicle charge of £350 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Mazak Super Quickturn 250MS Live Milling & Sub Spindle CNC Lathe with Mazatrol FUSION Control, Maximum Machining Diameter 300mm, Dia. Swing 500mm, 65mm Dia. Bar Capacity, C Axis and Milling 4000rpm, 12 Station Turret, 210mm Dia. Power Chuck, 22kw Spindle Motor, Tool Setter, Sub Spindle, Swarf Conveyor. S/No. 147255 (2000) Country of Origin: United Kingdom

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in Leicester, UK.A dismantling and loading onto suitable vehicle charge of £250 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Chiron FZ15S 5 Axis Vertical Machining Centre with Heidenhain TNC 530 Control, Traverses X Y Z: 550 x 400 x 425mm, Table Diameter 280mm, A Axis -/+ 100 Degrees, Spindle Speed 12,000rpm, Spindle Taper Din40, 20 Station ATC, Coolant, Spindle Probe (2003) Country of Origin: Germany

Due to export license restrictions imposed by HMRC of multi-axis CNC Machine Tools from the UK to Turkey, we regrettably advise that we cannot accept bids on such items from buyers in Turkey. We apologise for any inconvenience caused.

Please Note: This lot is located in Leicester, UK. A dismantling and loading onto suitable vehicle charge of £250 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

HAAS VF-6 Vertical Machining Centre with Haas HRT210 4th Axis, Traverses X Y Z: 1626 x 813 x 762mm, Table 1626 x 711mm, Spindle Speed 0 – 7,500rpm, Spindle Taper BT40, Spindle Motor 20Hp, HAAS Control, 20 Station Side Arm ATC, Coolant, Low Volt light, Swarf Auger. (Tooling Not Included) (2000)

Please Note: This lot is located in Leicester, UK. A dismantling and loading onto suitable vehicle charge of £300 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Ajax Premier 200 CNC Lathe with Fagor 800T Control, Swing Over Bed 400mm x 1150mm B.C. Spindle Speeds to 2300rpm, 3 Jaw Chuck, 8 Station Turret, Quick Change Tool Post, Tailstock. S/No. 38150B51124 (1997) Country of Origin: Spain

Please Note: This lot is located in Leicester, UK. A dismantling and loading onto suitable vehicle charge of £150 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Startrite 316H Vertical Bandsaw. S/No. 44269. Country of Origin: United Kingdom

Please Note: This lot is located in Leicester, UK. A dismantling and loading onto suitable vehicle charge of £75 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Worthington Cressex Rollair 500 Compressor, Type RLR1500AM7/300L, 7.75 Bar, 11kw. S/No. WCF102739 (2006) Country of Origin: France

Please Note: This lot is located in Leicester, UK. A dismantling and loading onto suitable vehicle charge of £75 will be automatically added to your invoice should you be successful in purchasing this item, blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.

Filtermist FX4002 Collector Unit. S/No. 099588 (2019) Country of Origin: United Kingdom

Please Note: This lot is located in Leicester, UK and will be loaded free of charge to a suitable vehicle. Blocking and securing will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Please Note: Should you be successful in purchasing an item and wish to Export it from the UK, a charge of £55 plus VAT will be automatically added to your invoice to prepare the goods and the paperwork which will require UK Export Customs Declarations. This process is now a mandatory UK export requirement from 1st January 2021. All our invoices are issued on an Incoterms EXW (Ex Works) basis.