Offers will be considered on the main items prior to the auction, please contact the auctioneer on: + 44 (0) 121 328 2424 or email: info@cottandco.com

Battenfeld Gloucester 5-Layer PP & PE Cast Film Extrusion Line, S/No. A15488/EKK1718 (2000), 20µm - 360µm, Max Output 500kg/h, Die Width 2700mm, Finished Width 2300mm, 'A' Extruder 150mm dia, 30:1 LD Twin Helix, 6-Zone, with Maddox Mixing, Vollmar 5 Component Gravimetric Blender with Re-Trim Feed, 'B' Extruder 90mm dia, 30:1 LD Twin Helix with Madox Mixing, Vollmar 5 Component Gravimetric Blender, 'C' Extruder 70mm dia, 30:1 LD Twin Helix with Madox Mixing, Vollmar 5 Component Gravimetric Blender, Cloreren Epoch II Die & Feedblock, Dynisco Screen Changer, Extrol Cast Line Control System, Twin-Roll Cast/Cooling x 700mm dia Section, Thermofisher Beta Gauge Scanner with Krypton 85 Source, Softal Double Sided Corona Discharge Treater, Herbold Granulator, Gloucester Phantom Indexing Turret Winder, 3 x 6", 3 x 3" dia Rewind Shafts, Hydraulic Core Puller, Floor Mounted Gantry System with Abus 3.2T Pendant Electric Chain Hoist, Rietsche Thomas Covac Skid Mounted Vacuum Pump, Becker VTLF 250 Vacuum Pump, Chilled Water Tank/Pumping Station, Dust Collection.

Please Note: The clearance deadline for this is lot has been extended to 24th September 2020

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

(4) x Stainless Steel Day Bins with Floor Mounted 125kg Jib, Lift-All 23kg Sack Lifter. S/No. 4629 (2014)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Spare & Unused Cloreren V-Block

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

* Combination of lots 1 & 1A

Lot 1 - Battenfeld Gloucester 5-Layer PP & PE Cast Film Extrusion Line, S/No. A15488/EKK1718 (2000)

Please Note: The clearance deadline for this is lot has been extended to 24th September 2020

Lot 1A - 4 x Stainless Steel Day Bins with Floor Mounted 125kg Jib, Lift-All 23kg Sack Lifter. S/No. 4629 (2014)

Lot 1B - Spare & Unused Cloreren V-Block

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Battenfeld Gloenco 5-Layer PP & PE Cast Film Extrusion Line (1986 - 2010) 20µm - 600µm, Max Output 400kg/h, Die Width 2300mm, Finished Width 2000mm, 'A' Extruder 150mm dia, 30:1 LD Twin Helix, 6-Zone, with Hydreclaim 6 Component Continuous Blender with Re-Trim Feed, 'B' & 'C' Extruders 90mm dia, 30:1 LD Twin Helix with Madox Mixing, 5-Zone, Maguire 4 Component Gravimetric Batch Blenders, Cloreren Epoch Design Die & Feedblock with Temperature Controlled Deckles, 3 x Dynisco Screen Changers Installed 2018, Excelsior Cast Line Control System, Twin-Roll Cast/Cooling x 500mm dia Section, Thermofisher L400 Scanning Frame Installed 2017, Sherman Double Sided Corona Discharge Treater, Herbold Granulator, Wintech Indexing Turret Winder, 3 x 6", 3 x 3" dia Rewind Shafts, Hydraulic Core Puller, Chilled Water Tank/Pumping Station, Dust Collection.

Please Note: Mezzanine Floor is not included

Please Note: The clearance deadline for this is lot has been extended to 24th September 2020

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

(4) x Stainless Steel Day Bins with Lift-All Floor Mounted 125kg Jib, Lift-All 23kg Sack Lifter. S/No. 4630 (2014)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

* Combination of lots 2 & 2A

Lot 2 - Battenfeld Gloenco 5-Layer PP & PE Cast Film Extrusion Line (1986 - 2010)

Please Note: The clearance deadline for this is lot has been extended to 24th September 2020

Lot 2A - (4) x Stainless Steel Day Bins with Lift-All Floor Mounted 125kg Jib, Lift-All 23kg Sack Lifter. S/No. 4630 (2014)

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Summit Moretto Portable Gravimetric Blender with MPI WSB-400 Series Scale, Morreto Fan

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Jenco HD100 Portable Hopper/Dryer. S/No. 66096

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Jenco HD100 Portable Hopper/Dryer. S/No. 31406

Please Note: This lot is located in Nelson, Lancashire. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.