2703 - Balancing Machines, CNC & Conventional Equipment no longer required due to restructuring and retirement at University Department, Electronic Balancing Services & W&W Engineering Ltd
Engineering
Asta conclusa il
Tempo residuo
Descrizione asta
Please Note: The majority of these lots are located in Essex. Please see individual lots for loading information.
Lot Numbers: 9, 10 & 11 are located in Southend on Sea. Unfortunately, there are no loading facilities available on site, dismantling and loading will be at the cost of the purchaser.
Premio dell'acquirente
Il premio dell'acquirente verrà addebitato a 16.00%.
IVA
IVA applicata pari al 20.00%.
Date ispezioni
Viewing will be available by appointment only with the Auctioneer. Please contact our Office on: +44 (0) 121 328 2424 or email us at: info@cottandco.com
* Nota Bene: - Qualsiasi traduzione uttilizzando ''Google Translate'' non è garantita come una traduzione accurata ed è solo a scopo di guida. La descrizione principale del lotto è in inglese ed e data a migliore conoscenza del banditore. Tuttavia, la precisione non è garantita e deve essere verificata dall'acquirente prima di fare offerte.
Avviso ai compratori
Termine ultimo pagamento
Termine ultimo ritiro
Spedizionieri
Squadre per il carico
Dettagli Esportazione/importazione dal UK
Lotti 1-10 di 103
Lotto 1: Schenck VE3 Balancing Machine
Schenck VE3 Balancing Machine with CAB 700 Control, Erlo all Geared Head Drilling Machine, Workpiece weight: 100kgs, Workpiece diameter: 810mm (2010)
Please Note: This lot is located in Essex and will be loaded free of charge to a suitable vehicle at the buyers risk. Blocking and securing will be at the cost of the purchaser.
Lotto 2: Schenck Nagahama 120 CBAD Balancing Machine
Schenck Nagahama 120 CBAD Balancing Machine with CAB 641 Control, Workpiece weight 15kgs, 350mm Workpiece diameter. S/No. 49-0001 (1998)
Please Note: This lot is located in Essex and will be loaded free of charge to a suitable vehicle at the buyers risk. Blocking and securing will be at the cost of the purchaser.
Lotto 3: Froude Consine Engine Dynamometer Dyno F24
Froude Consine Engine Dynamometer Dyno F24, un-used since being reconditioned by Froude, 1000bhp, 6000-9000rpm, Peak Torque 2700Nm with a load cell for torque measurement and speed pick up, S/No. DYNO1065 un-used since reconditioning by manufacturers
Please Note: This lot is located in Essex and will be loaded free of charge to a suitable vehicle at the buyers risk. Blocking and securing will be at the cost of the purchaser.
Lotto 4: Gate Eclipse CNC Milling Machine
Gate Eclipse CNC Milling Machine with Anilam 5000M 3-Axis Control, Power Drawbar, R8, Table Size: 1067 x 230mm (2005)
Please Note: This lot is located in Essex and will be loaded free of charge to a suitable vehicle at the buyers risk. Blocking and securing will be at the cost of the purchaser.
Lotto 5: Gate PBM2000 Turret Mill
Gate PBM2000 Turret Mill, Table Size: 1067 x 230mm, R8, Digital Readout Interlocking Guards, Power Feeds on 2 Axis, Power Drawbar (2006)
Please Note: This lot is located in Essex and will be loaded free of charge to a suitable vehicle at the buyers risk. Blocking and securing will be at the cost of the purchaser.
Lotto 6: Gate 360E Gap Bed Lathe
Gate 360E Gap Bed Lathe with 2-Axis D.R.O, 360mm Swing, Gap Bed x 1000mm between Centres .82-1400rpm, 3 Jaw , 4 Jaw, Faceplate, Toolpost and Holders, Tools, Guarding (2006)
Please Note: This lot is located in Essex and will be loaded free of charge to a suitable vehicle at the buyers risk. Blocking and securing will be at the cost of the purchaser.
Lotto 7: Gate PBM1000 Turret Mill
Gate PBM1000 Turret Mill, Table Size: 1067 x 230mm, R8, Digital Readout Interlocking Guards, Power Feeds (2006)
Please Note: This lot is located in Essex and will be loaded free of charge to a suitable vehicle at the buyers risk. Blocking and securing will be at the cost of the purchaser.
Lotto 8: Gate PBM1000 Turret Mill
Gate PBM1000 Turret Mill, Table Size: 1067 x 230mm, R8, Digital Readout Interlocking Guards, Power Feeds (2006)
Please Note: This lot is located in Essex and will be loaded free of charge to a suitable vehicle at the buyers risk. Blocking and securing will be at the cost of the purchaser.
Lotto 9: Cincinnati Arrow 750 Vertical Machining Centre
Cincinnati Arrow 750 Vertical Machining Centre with Accramatic 2100 Control, Traverses: 762 x 510 x 510mm, 40 Taper, 60-6000rpm, Manuals, Collets and Tooling. S/No. 7043a00rd0651 (1996)
Please Note: This lot is located in Southend on Sea. Unfortunately there are no loading facilities available, blocking and securing will be at the cost of the purchaser.
Lotto 10: Cincinnati Falcon 200 CNC Lathe
Cincinnati Falcon 200 CNC Lathe with Accramatic 2100 Control, 200mm Chuck, Tailstock, 215mm -x .z 420mm, 12 position, 4500rpm, 67mm spindle, Tooling and Manuals S/No. 7048AOARM810 (1997)
Please Note: This lot is located in Southend on Sea. Unfortunately there are no loading facilities available, blocking and securing will be at the cost of the purchaser.