Huron Type TXD633L Bed Mill with Heidenhain 426PB Control, Table Size 2200mm x 1100mm, Traverse: X 2000mm, Y = 1000mm, Z = 1000mm, Fully programmable head, 3 & 2 axis 50 Iso Taper, Approximate Total Weight 22,000Kg's (1996)

Please Note: This Item is located in Cheshire, Unfortunately there are no loading facilities available on site. Dismantling & Loading will be at the cost of the purchaser.

Mori Seiki Type MV40 Vertical Machining Centre with Fanuc 10M Control , Table 1100 x 450mm, 30 Tool Auto Tool Changer, 40150 Spindle.

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.

Broadbent Stanley Type FB3080 Gap Bed CNC Lathe with Anilam 4200T Control, 80" Distance Between Centres, 30" Swing Over Bed, 40" Swing in Gap, 19" Swing Over Cross Slide, Spindle Speeds 27 - 2250rpm, Tailstock No.5 Morse Taper, 3 Jaw Chuck, 8-Station Toolpost, Approximate Total Weight 6,000Kg's (2003)

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.

Bridgeport Type 460 Vertical Machining Centre with Heidenhain TNC370 Control, X Axis Travel = 490mm, Y Axis Travel = 340mm, Z Axis Travel = 480mm, Spindle Speeds 40-6000rpm, Spindle Taper BT40, Work Table Surface 840mm x 360mm, Max Table Load 500Kg, Tool Changer Capacity 8 Tools, Approximate Total Weight 2,600Kg's. (2005)

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.

BRIDGEPORT Type 500/16 Vertical Machining Centre with Heidenhain TNC370 Control, X Axis Travel 500mm, Y Axis Travel 340mm, Z Axis Travel 520mm, Spindle Taper BT40, Work Table Surface 840mm x 360mm, Max Table Load 500Kg, Tool Changer Capacity 16 Tools, Approximate Total Weight 2,600Kg's.

(Please Note: The tool Changer is in need of attention)

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.

Bronx Model PPU Double Pinch Bending Rolls, Maximum Width 3700mm (12 feet). Roll Diameter: 585mm (23"). Pre Bending and Rolling Thickness: 30mm (1 & 1/4"). Rolling Only Thickness: 40mm (1 5/8"). Rolling Speed 15 feet per minute (approx), Hydraulic Drop End, Main drive motor 75 HP, Adjustment motors 25 HP

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.

Cincinnati Dart 500 Vertical Machining Centre with Acramatic 2100 Control, Table Size 700mm x 520mm, X Axis 510mm, Y Axis 510mm, Z Axis 510mm, Load Capacity 350Kg, Tool Holder BT40, Spindle Speeds 60-6000rpm, Power 25KVA, Spindle Power 5.5KW, 21 Tool ATC, Tool to Tool 8 Seconds.

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.

Simerom Type FGH630 Power Guillotine 3000mm x 6.5mm with Elco Controlled Back Gauge.

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.

Keetona Hydroform Type HUF 84170 Powered Folder, Capacity 100" x 1/4" (2540mm x 6mm), 60" x 5/16" (1524mm x 8mm), 40" x 3/8" (1016mm x 10mm)

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.

Haco Type PPH6030 Down Stroking Pressbrake, Gap 3000mm x 60 Ton with Autobend 5S Single Axis CNC Back Gauge

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing however will be at the cost of the purchaser.