2354 - CNC & Conventional Machinery available due to the Final Closure of Skil Environmental Manufacturing
Artikelbeschreibung
Ajax CNC Centre Lathe with GE Fanuc Series 2li-TB Control, Hydrafeed Multifeed Model ML1 Short Magazine CNC Barfeed, Ponar (Poland) Type 600/2000 Centre Lathe, Adcock & Shipley Type 2JUR Universal Milling Machine, Startrite 20 RWF Vertical Bandsaw, Abac Model VT30 Rotary Screw Air Compressor, Stanley Press Tool Manual Lift Truck Plus Many Others...
Seitenaufrufe
Viewing by Appointment with the Auctioneer only, please contact our Office on: + 44 (0) 121 328 2424
Auktion endet am
Dienstag 2 Dez 2014 at 03:00 PM GMT
Käuferprovision
Es gilt ein Aufgeld von 16.00%.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00%.
Datum der letzten Zahlung
Donnerstag 4 Dez 2014 at 05:00 PM GMT
Endgültiges Freigabedatum
Donnerstag 18 Dez 2014 at 05:00 PM GMT
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Location:- These Items are located in Cheshire
Clearance Dates - Due to the Christmas break the removal dates for these items will be as follows:
Up until Thursday 18th December 2014
And then from:-
5th January 2015 to 15th January 2015
(There will be no clearance on site between 19th December 2014 and 4th January 2015 inclusive)
Sie müssen sich einloggen, um bieten zu können
Auktion endet am
Dienstag 2 Dez 2014 at 03:00 PM GMT
Käuferprovision
Es gilt ein Aufgeld von 16.00%.
Mehrwertsteuer
Zzgl. Mehrwertsteuer in Höhe von 20.00%.
Datum der letzten Zahlung
Donnerstag 4 Dez 2014 at 05:00 PM GMT
Endgültiges Freigabedatum
Donnerstag 18 Dez 2014 at 05:00 PM GMT
Versandunternehmen
Lagerfirma
Details zum Exportieren/Importieren aus Großbritannien
Lose 1-10 / 53
Lot 1: Ajax CNC Centre Lathe with GE Fanuc Series 2li-TB Control
Ajax CNC Centre Lathe with GE Fanuc Series 2li-TB Control, Swing Over Bed 600mm, Distance Between Centres 2000mm, 8-Station Indexing Tool Post, Spindle Bore 110mm, 400mm 3 Jaw Chuck (2005)
Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser.
Lot 2: Hydrafeed Multifeed Model ML1 Short Magazine CNC Barfeed
Hydrafeed Multifeed Model ML1 Short Magazine CNC Barfeed, Bar Length Capacity: 1200mm, Bar Diameter Range: 3-80mm, 240V - Single Phase
Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser
Lot 3: Ponar (Poland) Type 600/2000 Centre Lathe
Ponar (Poland) Type 600/2000 Centre Lathe, Swing Over Bed 600mm, Between Centres 2200mm, Spindle Bore 70mm, Speeds 18 - 1800 rpm, Taper Turning, 3 & 4 Jaw Chuck, 2 & 3 Point Steadies, Face Plate
Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser
Lot 4: Harrison M450 Gap Bed Centre Lathe
Harrison M450 Gap Bed Centre Lathe, Swing Over Bed 450mm, Swing In Gap 642mm, Distance Between Centres 1500mm, Spindle Bore 65mm, Spindle Speeds 40-2000 rpm, Metric Leadscrew & Dials, 3&4 Jaw Chucks, Quick Change Tool Post, 3 Point Steady, Mitutoyo 2 Axis Digital Read Out
Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser
Lot 5: Harrison M390 Gap Bed Centre Lathe
Harrison M390 Gap Bed Centre Lathe, Swing Over Bed 400mm, Swing In Bed 585mm, Distance Between Centre 1250mm, Spindle Bore 54mm, Spindle Speeds 25-2000rpm, Metric Leadscrew & Dials. Quick Change Tool Post, 3 Jaw Chuck
Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser
Lot 6: Colchester Mascot 1600 Gap Bed Centre Lathe
Colchester Mascot 1600 Gap Bed Centre Lathe, Swing Over Bed 17", Swing In Gap 24", Distance Between Centres 80", Spindle Bore 3", Spindle Speeds 20-1600 rpm, 3 Jaw Chuck, Quick Change Tool Post
Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser
Lot 7: Colchester Triumph 2000 Straight Bed Centre Lathe
Colchester Triumph 2000 Straight Bed Centre Lathe, Swing Over Bed 15 1/4", Swing Over Cross Slide: 9 1/2", Distance Between Centres 50", Spindle Bore 2 1/8", Spindle Speeds 25-2000 rpm, Metric Leadscrew & Thread Dial Indicator, Dual Dials, Quick Change Tool Post, Bed Stop, Taper Turning
Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser
Lot 8: Myford Type 254S SS And SC Centre Lathe
Myford Type 254S SS And SC Centre Lathe, Swing Over Bed 9", Distance Between Centres 30", Spindle Bore 1", Spindle Speeds 53 - 2000rpm, Imperial Gear Box, 3 Jaw Chuck
Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser
Lot 9: Boxford BUD Centre Lathe
Boxford BUD Centre Lathe, 10" Swing Over Bed. 16" Distance Between Centre's
Please Note: Tailstock needs attention
Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser
Lot 10: KSN Stainless Steel Parts Washing System
KSN Stainless Steel Parts Washing System with Filtermist X Cel Type FX4000, Heating Man-O-Time, Auto Drain, Oil Seperator (2002)
Please Note:- This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and Securing however will be at the cost of the purchaser
* Bitte beachten Sie: - Jede Übersetzung mit Google Translate ist nicht als genaue Übersetzung garantiert und dient nur zur Orientierung. Die englische Losbeschreibung ist die übergeordnete Beschreibung und erfolgt nach bestem Wissen des Auktionators. Die Richtigkeit wird jedoch nicht garantiert und sollte vom Käufer vor Gebotsabgabe überprüft werden.