Viking VT630 Gap Bed Centre Lathe, 3000mm Between Centres, 630mm Swing over Bed, 400mm Swing over Cross Slide, 75mm Spindle Bore, Speeds 9-1600 rpm, Rapdis to Saddle, 3 & 4 Jaw Chucks, Quick Change Toolpost, 800mm Face Plate, 2 & 3 Point Steadies. 2 Axis Digital Readout (1998)

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Ward 7D Combination Turret Lathe, Swing Over Bed 16", Spindle Bore 5 1/4", Speeds 18 to 730rpm

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

POTISJE PA25 Gap Bed Centre Lathe, 10ft Between Centres , 21" Swing over Bed, 28" Swing in Gap, 12 1/4" Swing over Cross Slide, 3 1/2" Spindle Bore, Speeds 20 to 2000 rpm. 3 & 4 Jaw chuck, 2 & 3 Point Steadies, Face Plate & Quick Change Tool Post (1988)

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Labor Gap Bed Centre Lathe, 450mm Swing over bed, 650mm Swing in Gap, 2100mm Between Centres, 75mm Spindle Bore, 3 & 4 Jaw Chucks, Fixed & Travelling Steadies, Quick Change Toolpost

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Colchester Mascot 1600 Gap Bed Centre Lathe, 17" Swing over bed, 28" Swing in Gap, 80" Between Centres, 3" Spindle Bore, Speeds 20-1600rpm, Quick Change Toolpost, 3 Jaw Chuck

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

TOS SN 71C Gap Bed Centre Lathe, 800mm Swing Over Bed, 920mm Swing In Gap, 400mm Swing Over Cross Slide, 2000mm Distance Between Centres, 80mm Spindle Bore, 200mm 4 Jaw Chuck, Rapid Power to Saddle

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Emco Turn 140 CNC Lathe, Emcotronic T1 Control, 340mm Swing Over Bed, 158mm Swing Over Cross Slide, 300mm X & Y Traverse, 30mm Spindle Bore, Spindle Speeds 150-2500rpm

Please Note:- This Machine is for Spares or Repairs Only, Sold as is

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser.

Stanley Gap Bed Centre Lathe, Swing Over Bed 21", Swing in Gap 36", Distance Between Centres 60", Speeds 13 to 800rpm, Spindle Bore 3 1/2"

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Colchester Triumph 2000 Gap Bed Centre Lathe, 15" Swing over Bed, 9 1/2" Swing over Cross slide, 23" Swing in Gap, 50" Between Centres,  2 1/8" Spindle Bore, Speeds 25-2000 rpm,  Imperial leadscrew & Dials, Quick change Toolpost & Holders, 3 Jaw Chuck

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Dean Smith & Grace Type 13/1 Centre Lathe, 13 1/2" Swing over bed, 42" between centres, 1 1/2" Spindle Bore, Ex. College

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Ward 7DS Capstan Lathe, 2 1/4" Spindle Bore with Collet Chuck, 4 Way Toolpost,  Rear Toolpost,  Some Turret Tooling

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Herbert 4 Capstan Lathe, 2" Spindle Bore, Collet Chuck

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Ward 2DB Scholar Capstan Lathe, Collet Chuck, Dual Dials with Tooling

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Herbert 2D Capstan Lathe (Square Head), 13" Swing over Bed, 7 1/2" Swing over Cross Slide, 8" Max Turning Length, 1 1/2" Spindle Bore, Speeds 50-2550 rpm

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Colchester Triumph 7 1/2" Gap Bed Centre Lathe, 15" Swing Over Bed, 22" Swing in Gap, 30" Between Centres. 2" Spindle Bore, 2 & 3 Point Steadies. 3 Jaw Chuck, Quick Change Tool Post

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Colchester Student MK2 Gap Bed Centre Lathe, 13" Swing Over Bed, 25" Distance Between Centres, Quick Change Tool Post

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Colchester Chipmaster Variable Speed Centre Lathe, 11.1/4" Swing over bed. 20" Distance Between Centres, 1.3/8" Spindle Bore. Spindle Speeds: 35-3000rpm, Motor Size 3HP, 3 Jaw Chuck, Quick Change Toolpost, 2 & 3 Point Steadies

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser

Union Graduate Wood Turning Lathe, Swing over bed 12", Distance between centres 30" with Bowl Turning Attachment

Please Note: This Item is located in Cheshire and will be loaded free of charge to a suitable vehicle. Blocking and securing of the equipment however, will be at the cost and responsibility of the purchaser